JB/T 5925.1-1991 Basic parameters of mechanical vibration aging device

Replaced by JB/T 5925.1-2005 JB/T 5925.1-1991 Basic parameters of mechanical vibration aging device JB/T5925.1-1991 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
Mechanical Vibration Aging Device
Subject Content and Scope of Application
Basic Parameters
This standard specifies the basic parameters of the mechanical core vibration aging device (hereinafter referred to as the "device"). This standard applies to devices that perform vibration aging treatment on parts, forgings, and joints. 2 Reference Standards
JB3000
3 Basic Parameters
Method for Compiling Casting Equipment Models
The main parameter of the device is the rated speed.
3.2 The basic parameters of the device shall comply with the provisions of the following table. Table
Rated speed
Speed ​​range
Maximum exciting force kN
Rated power of motor W
Speed ​​accuracy r/min
2000~10000
3.3 The model of the device shall comply with the provisions of JB3000, 8.000
1000~8000
Additional remarks:bzxZ.net
This standard was proposed by the Technical Committee for Standardization of Casting Machinery of the Ministry of Machinery and Electronics Industry. This standard is under the jurisdiction of the Jinan Casting and Forging Machinery Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by Heilongjiang Hailun Vibration Aging Equipment Factory. The main drafter of this standard is Zhang Jixiang.
1991-11-30 approved by the Ministry of Machinery and Electronics Industry JB/T5925.1-91
1000~6000
1992-07-01 implemented
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.