JB/T 2474-1999 Basic parameters of hydraulic screw press
time:
2024-08-11 21:20:45
- JB/T 2474-1999
- in force
Standard ID:
JB/T 2474-1999
Standard Name:
Basic parameters of hydraulic screw press
Chinese Name:
液压螺旋压力机 基本参数
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-14 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Chipless Processing Equipment>>25.120.10 Forging Equipment, Punching Machines, Shearing MachinesChina Standard Classification Number:
Machinery>>General Processing Machinery and Equipment>>J62 Forging Machinery
alternative situation:
JB 2474-1979
Focal point Organization:
National Forging Machinery Standardization Technical CommitteePublishing Department:
National Forging Machinery Standardization Technical Committee
Description (Translated English) / downloadSkip to download
Summary:
JB/T 2474-1999 This standard is a revision of JB 2474-79 "Basic Parameters of Hydraulic Screw Press". This standard specifies the basic parameters of hydraulic screw press. This standard is applicable to hydraulic screw presses used for die forging, precision forging, etc. This standard was first issued in October 1979. JB/T 2474-1999 Basic Parameters of Hydraulic Screw Press JB/T2474-1999 Standard Download Decompression Password: www.bzxz.net
Standard contentSome standard content:
ICS25.120.10
Machinery Industry Standard of the People's Republic of China
JB/T2474—1999
Basic Parameters
Hydraulic Screw Press
Published on 1999-05-14
National Bureau of Machinery Industry
Implemented on 2000-01-01
JB/T2474—1999Www.bzxZ.net
This standard is a revision of JB247479 "Basic Parameters of Hydraulic Screw Press". The technical content of this standard is basically consistent with that of JB247479, and it has only been re-edited according to relevant regulations. This standard will be implemented from January 1, 2000
This standard replaces JB247479 from the date of implementation. This standard is proposed and managed by the National Technical Committee for Standardization of Forging Machinery. The drafting units of this standard are: Jinan Foundry and Forging Machinery Research Institute, Xi'an Heavy Machinery Research Institute. This standard was first issued in October 1979
Machinery Industry Standard of the People's Republic of China
Hydraulic Screw Press
Basic Parameters
This standard specifies the basic parameters of hydraulic screw presses. This standard is applicable to hydraulic screw presses used for die forging, precision forging, etc. Basic Parameters
The basic parameters of hydraulic screw presses are shown in Table 1. Table 1
Energy of moving parts
Slider stroke
Number of strokes
Minimum closed height
Workbench
Approved by the State Machinery Industry Bureau on 1999-05-146300
JB/T2474-1999
Replaced JB247479
100000
Implemented on 2000-01-01
Mechanical industry standard
Basic parameters of hydraulic screw press||t t||JB/T2474—1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing sheet 1/4 Number of words 4000
Format 880×1230
First printing in September 1999
First edition in September 1999
Print run 1-500
Price 500 yuan
99-514
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T2474—1999
Basic Parameters
Hydraulic Screw Press
Published on 1999-05-14
National Bureau of Machinery Industry
Implemented on 2000-01-01
JB/T2474—1999Www.bzxZ.net
This standard is a revision of JB247479 "Basic Parameters of Hydraulic Screw Press". The technical content of this standard is basically consistent with that of JB247479, and it has only been re-edited according to relevant regulations. This standard will be implemented from January 1, 2000
This standard replaces JB247479 from the date of implementation. This standard is proposed and managed by the National Technical Committee for Standardization of Forging Machinery. The drafting units of this standard are: Jinan Foundry and Forging Machinery Research Institute, Xi'an Heavy Machinery Research Institute. This standard was first issued in October 1979
Machinery Industry Standard of the People's Republic of China
Hydraulic Screw Press
Basic Parameters
This standard specifies the basic parameters of hydraulic screw presses. This standard is applicable to hydraulic screw presses used for die forging, precision forging, etc. Basic Parameters
The basic parameters of hydraulic screw presses are shown in Table 1. Table 1
Energy of moving parts
Slider stroke
Number of strokes
Minimum closed height
Workbench
Approved by the State Machinery Industry Bureau on 1999-05-146300
JB/T2474-1999
Replaced JB247479
100000
Implemented on 2000-01-01
Mechanical industry standard
Basic parameters of hydraulic screw press||t t||JB/T2474—1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing sheet 1/4 Number of words 4000
Format 880×1230
First printing in September 1999
First edition in September 1999
Print run 1-500
Price 500 yuan
99-514
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 12608-2003 Thermal spraying—Wires,rods and cords for flame and arc spraying—Classification and technical supply condition
- GB 4871-1995 Ordinary flat glass
- JB/T 6642-1993 Measurement and evaluation method of roundness error of rolling bearing parts
- JB/T 9159.8-1999 Single-axis longitudinal cutting automatic lathe auxiliary tool tap sleeve A-type dimensions
- QB/T 2212.23-1996 Construction tools (brick and tile) Seam tie
- NY/T 471-2010 Green food－Guideline for use of feeds and feed additives in livestock and poultry
- HG/T 2492-1993 Ethyl α-cyanoacrylate instant adhesive
- JB/T 6369-1992 Technical requirements for flexible graphite spiral wound gaskets
- JB/T 7688.9-1995 Technical specifications for metallurgical cranes - Slab tipping cranes
- GB 18159-2000 General technical requirements for sliding amusement machines
- YC/T 16.3-2003 Reconstituted tobacco Part 3: Papermaking process
- GB/T 5009.168-2003 Determination of eicosapentaenoic acid and docosahexaenoic acid in foods
- NY/T 492-2002 Mango
- GB 16889-1997 Pollution control standard for municipal solid waste landfills
- SY 6048-1994 Safety management regulations for field operations of electrical engineering teams
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]