JB/T 9162.20-1999 Table stem dimensions
time:
2024-08-11 18:20:03
- JB/T 9162.20-1999
- in force
Standard ID:
JB/T 9162.20-1999
Standard Name:
Table stem dimensions
Chinese Name:
表杆 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.20-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.20-1999 JB/T 9162.20-1999 Table stem dimensions JB/T9162.20-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01bzxz.net
Machinery Industry Standard of the People's Republic of China
Dial holding rud
|-Dnenkons
This standard specifies the types and sizes of dial marks. To the style and size
The style and size are as follows: Type A
3 marking
Marking example:
Marking of Type A rod with diameter of 12mm and/=10mm: Morning rod A12×160JR/T9162.20—[999 National Machinery Industry Week 1999.05-20 approved 2
.IBT9162.20—1999
Agent check 7.8 J44001.20-87
2000-01-01 implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01bzxz.net
Machinery Industry Standard of the People's Republic of China
Dial holding rud
|-Dnenkons
This standard specifies the types and sizes of dial marks. To the style and size
The style and size are as follows: Type A
3 marking
Marking example:
Marking of Type A rod with diameter of 12mm and/=10mm: Morning rod A12×160JR/T9162.20—[999 National Machinery Industry Week 1999.05-20 approved 2
.IBT9162.20—1999
Agent check 7.8 J44001.20-87
2000-01-01 implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 9930.1-2002 Vertical band sawing machine Part 1: Parameters
- HG/T 2677-1995 Industrial Polyaluminium Chloride
- GB/T 14926.28-2001 Method for detecting mouse parvovirus in experimental animals
- QX/T 498-2019 Technical specifications for inspection of lightning protection system for metro
- MT 376-1995 Technical requirements for blasting busbars
- QB/T 2321-2004 Straight knife cutting machine
- FZ/T 43015-2001 Mulberry silk knitted garments
- GB/T 14641-1993 Determination of sodium content in industrial circulating cooling water - Atomic absorption spectrometry
- GB/T 17108-2006 Technical directives for the division of marine functional zonation
- GB 3734.2-1983 Compression-type tapered thread straight-through fitting body
- HG 2315-1992 Mancozeb wettable powder
- GB 3362-1982 Test method for tensile properties of carbon fiber multifilament
- GB/T 17728-1999 Oil recovery device
- GB/T 3933.2-2002 Inspection conditions for milling machines with lifting tables - Accuracy inspection - Part 2: Horizontal milling machines
- HG/T 2474-1993 Spiral cone mixer
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com