
JB/T 2001.46-1999 Air filling valve for water system pump station (PN=20, 31.5MPa)
time:
2024-08-11 18:42:37
- JB/T 2001.46-1999
- in force
Standard ID:
JB/T 2001.46-1999
Standard Name:
Air filling valve for water system pump station (PN=20, 31.5MPa)
Chinese Name:
水系统 泵站用充气阀(PN=20、31.5MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2049-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical Committee

Skip to download
Summary:
JB/T 2001.46-1999 JB/T 2001.46-1999 Air filling valve for water system pump station (PN=20, 31.5MPa) JB/T2001.46-1999 Standard download decompression password: www.bzxz.net

Some standard content:
IC.s$ 23.110
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
"Model Painting
Standard of the Machinery Industry of the People's Republic of China
Water System
Gas-charging vulve for nnlur aerumulutor(PN-20, 31.5 MPa)
The standard stipulates "the type, size and technical requirements of air valves with pressure tolerance of 21 and 21.5 MPa, JR/7:2001.46-1999
Original: 12019-81
This standard applies to the air-filling valves used in pump-actuator transmission systems with a pressure of 21 and 21.5 MPa. 2 Reference standards
The provisions contained in the following standards are quoted in this standard or are the provisions of this standard. This standard is published and the length of each paragraph is effective: the standard will be revised twice. The parties using this standard should explore the possibility of using the latest version of the following mark, JB/2001.47-1999 Air brake mesh core for water system station (FPN=20, 31.5 MPa) 3 Types and sizes| |tt||3.1 The type and size of the valve are in accordance with the provisions of 1,
3.2 Inflatable head weight: 25.3kz
4 Technical requirements
4.1 Nominal pressure 31.5MPa, test pressure 42MPa; Nominal pressure 20MPa, test pressure 10MPa4. Adjust the valve and test it to measure the size and judge the performance. The test method meets the technical requirements of J32001.17. 5 Marking bzxZ.net
Inflatable limit of 10mm diameter:
Inflatable net DN1 [FJH/2001.46--1999
State Machinery Industry Bureau 1 regulation 9-(6-28 approved 2000-01-01 implementation
IAT2001.46-1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
"Model Painting
Standard of the Machinery Industry of the People's Republic of China
Water System
Gas-charging vulve for nnlur aerumulutor(PN-20, 31.5 MPa)
The standard stipulates "the type, size and technical requirements of air valves with pressure tolerance of 21 and 21.5 MPa, JR/7:2001.46-1999
Original: 12019-81
This standard applies to the air-filling valves used in pump-actuator transmission systems with a pressure of 21 and 21.5 MPa. 2 Reference standards
The provisions contained in the following standards are quoted in this standard or are the provisions of this standard. This standard is published and the length of each paragraph is effective: the standard will be revised twice. The parties using this standard should explore the possibility of using the latest version of the following mark, JB/2001.47-1999 Air brake mesh core for water system station (FPN=20, 31.5 MPa) 3 Types and sizes| |tt||3.1 The type and size of the valve are in accordance with the provisions of 1,
3.2 Inflatable head weight: 25.3kz
4 Technical requirements
4.1 Nominal pressure 31.5MPa, test pressure 42MPa; Nominal pressure 20MPa, test pressure 10MPa4. Adjust the valve and test it to measure the size and judge the performance. The test method meets the technical requirements of J32001.17. 5 Marking bzxZ.net
Inflatable limit of 10mm diameter:
Inflatable net DN1 [FJH/2001.46--1999
State Machinery Industry Bureau 1 regulation 9-(6-28 approved 2000-01-01 implementation
IAT2001.46-1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 15478-1995 压力传感器性能试验方法
- GB/T 8893-1988 Rectangular and square copper and copper alloy waveguides
- GB/T 11418-1989 Test method for heat resistance of enamel
- GB/T 15524-1995 Reliability requirements and test methods for non-broadcast video tape recorders
- JB/T 7366-1994 Design and calculation of plane scroll springs
- GB 18054-2000 Health standard for benzo(a)pyrene in the air of residential areas
- JB/T 9271-1999 Pressure gauges for welding, cutting and similar processes
- GB/T 37927-2019 Specifications for collecting information of scientific research credit
- GB/T 4458.6-2002 Methods of drawing mechanical drawings - Section views and cross-sections
- QX/T 514-2019 Metadata of meteorological archives
- SY/T 0055-2003 Specification for distance measurement of oil and gas pipelines
- JB/T 6280.2-1992 Test methods for large electric sprinkler irrigation machines
- GB 16487.2-1996 Imported Waste Environmental Protection Control Standard Smelting Slag
- JB/T 7254-1994 Continuously variable speed cycloid reducer
- SJ 2534.15-1987 Test procedures for antennas-Environmental factors
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com