
GB/T 14549-1993 Power quality - Harmonics in public power grids
time:
2024-09-19 18:26:50
- GB/T 14549-1993
- in force
Standard ID:
GB/T 14549-1993
Standard Name:
Power quality - Harmonics in public power grids
Chinese Name:
电能质量 公用电网谐波
Standard category:
National Standard (GB)
-
Date of Release:
1993-07-31 -
Date of Implementation:
1994-03-01
Standard ICS number:
Energy and Heat Transfer Engineering >> 27.010 Energy and Heat Transfer Engineering ComprehensiveChina Standard Classification Number:
>>>>F20
Release date:
1993-07-31Review date:
2004-10-14Drafter:
Qu Tao, Ren Yuan, Lin Haixue, To Deli, Chen Baoxi, Li Pingzhi, Lu RunyuDrafting Organization:
Ministry of Energy Electricity DepartmentFocal point Organization:
National Technical Committee for Standardization of Voltage, Current Level and FrequencyPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Standardization Administration

Skip to download
Summary:
This standard specifies the permissible values of harmonics in public power grids and their test methods. This standard applies to public power grids with an AC rated frequency of 50Hz and a nominal voltage of 110kV and below. This standard does not apply to transient phenomena and short-time harmonics. GB/T 14549-1993 Power Quality Public Power Grid Harmonics GB/T14549-1993 Standard download decompression password: www.bzxz.net
- Recommended standards
- HG/T 3691-2001 Industrial steel skeleton polyethylene plastic composite pipe fittings
- HG/T 3568-1989 35mm film recording disk
- QB/T 1046-2003 Gravure ink for plastic film
- GB/T 11798.2-2001 Technical requirements for the verification of motor vehicle safety testing equipment Part 2: Technical requirements for the verification of roller reaction brake test benches
- GB 18393-2001 Rules for quality inspection of slaughtered cattle and sheep
- JB/T 7954-1999 Insert tooth sleeve face milling cutter
- QB/T 2619-2003 Papermaking special yarn drying fabric
- JB 4029-2000 Technical requirements for safety protection of grinding wheel guards of grinding machines
- GB/T 8753-1988 Anodic oxidation of aluminium and aluminium alloys - Assessment of the loss of adsorption capacity of anodic oxide films after sealing - Staining spot test after acid treatment
- GB/T 5162-1985 Determination of tap density of metal powders
- JB/T 3344-1993 Condenser performance test procedures
- JB/T 1542-1999 Porcelain bushings for 110 and 200 kV outdoor oil-free circuit breakers
- GB 4824-2004 Limits and measurement methods of electromagnetic disturbance characteristics of industrial, scientific and medical (ISM) radio frequency equipment
- JB/T 5818.1-1991 Technical requirements for wire and cable stranding equipment
- GH/T 1015-1999 Honey packing steel drum
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com