JB/T 9162.25-1999 Bushing Dimensions
time:
2024-08-11 18:17:47
- JB/T 9162.25-1999
- in force
Standard ID:
JB/T 9162.25-1999
Standard Name:
Bushing Dimensions
Chinese Name:
衬套 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.25-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.25-1999 JB/T 9162.25-1999 Bushing size JB/T9162.25-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
National Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Dimensions
Split sleevewww.bzxz.net
Dirueasions
The standard specifies the embedded size of the lining, type and size
The type and size are as shown in the figure below.
Marking example:
Marking of bushing with a bore diameter of 8 μm:
8JB, T9162.25—1999
Approved by the State Machinery Industry Bureau on 1009-15-20 JB/T 9162.25—1999
Agency 7R.11101.25-8T
2000-01-01 Hot sale
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
National Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Dimensions
Split sleevewww.bzxz.net
Dirueasions
The standard specifies the embedded size of the lining, type and size
The type and size are as shown in the figure below.
Marking example:
Marking of bushing with a bore diameter of 8 μm:
8JB, T9162.25—1999
Approved by the State Machinery Industry Bureau on 1009-15-20 JB/T 9162.25—1999
Agency 7R.11101.25-8T
2000-01-01 Hot sale
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 9842-1999 Bourdon tube pressure gauge for tractors and internal combustion engines
- GH/T 1088-2013 Evaluation specification on agricultural products supplier
- JB/T 9050.3-1999 Cylindrical gear reducer loading test method
- JB/T 10032-1999 Micrometer
- GB/T 27060-2006 conformity assessment - Code of good practice
- CH/T 2005-1999 The electronic data recording rules for triangulation
- QB/T 1577-1992 Industrial sewing machine embroidery machine heads
- GB/T 5494-1985 Inspection method for impurities and imperfect grains in grain and oilseeds
- GB 19157-2003 General technical requirements for remote-controlled fire monitor systems
- GB/T 39619-2020 Basic terms of hydrographic survey
- GB 8897.2-2005 Primary batteries Part 2: Dimensions and technical requirements
- GB/T 14604-1993 Gas oxygen for use in the electronics industry
- JJG 186-1997 Verification Regulation of Moving Coil Indicators and Step -indication Controllers Associated for Measuring Temperature
- GB/Z 23283-2009 long-term preservation of electronic document-based information
- GB 8874-1988 General terminology of grain and oil technology and equipment
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]