JB/T 2001.36-1999 Water system filling valve core (PN=20, 31.5MPa)

JB/T 2001.36-1999 This standard is a revision of JB 2036-84 "Liquid-filled valve core for hydraulic press (Pg=200×100000～315×100000Pa)". This standard specifies the type, size and technical requirements of liquid-filled valve core. This standard is applicable to liquid-filled valve cores with a nominal pressure of 20 and 31.5MPa. This standard was first issued on January 1, 1984. JB/T 2001.36-1999 Liquid-filled valve core for water system (PN=20, 31.5MPa) JB/T2001.36-1999 standard download decompression password: www.bzxz.net

IC.s$ 23.110
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
Standard of the Machinery Industry of the People's Republic of China
Water system filling valve core
Wuter system:Core af prefilvahe(PN=20, 31.5 MPa ]
This standard specifies the types, sizes and technical requirements of liquid-free valve cores. This standard is used for the filling cores with a force of 20 and 21.5 MPa. 2 Types and sizes
Types and cores 1. Table 1: JB.T2001.36-1999
Old 2034
1-Venting room: 2-Silver order: 3-Opening: 4 Account mother: 5 Section: 60 Shape 7-Elastic support seat: 8-Single: 9-Limiting cup: 10-Glue: 11·Flash sequence; 120 Precision purchase National Machinery Industry Bureau 1999-46-28 Approved 2000-01-01 Implementation
FET 20DE.36.1
T 201.362
J13/T:24X91.56.3
BL2031.36.4
J3/T 2(91.36.3
JB203L.36.6
JE/T26L.36.7
|B/T 2091.36.!
33-1 2001.36.1
JR/T 201.15.2bzxz.net
JRT 2001.36.4
JB:T2001.36.5
J3/T 20D1.36.7
F8.T 201.36.8
3 Technical requirements
JB/T 200136-1999
3.1 Nominal force 31.5MPa, test pressure 42MPa, nominal pressure 20Mpa, test force Ma.
6 ×36 ×3
8×36 ×3
8x2×3
8 M48×J
8×M56×4
B×M x4
1? × M6: 1 × -I
17×M64×4
：405
3.2 The test pressure liquid should be the same as the working liquid, and the pressure should be maintained for 10 minutes. There should be no leakage and pressure reduction at the seals and ports. 3.3 The valve body is not allowed to be connected to the valve body, only the valve differential is used. 4 Marking example
Nominal reverse diameter 65 Old liquid-filled valve core:
Liquid-filled valve core DN65
5JBT200)36—1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.