JB/T 2850-1993 Technical conditions for heat treatment of rolling bearing parts of Cr4MO4V high temperature bearing steel
time:
2024-08-04 06:10:26
- JB/T 2850-1993
- Abolished
Standard ID:
JB/T 2850-1993
Standard Name:
Technical conditions for heat treatment of rolling bearing parts of Cr4MO4V high temperature bearing steel
Chinese Name:
Cr4MO4V高温轴承钢滚动轴承零件 热处理技术条件
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1993-05-07 -
Date of Implementation:
1994-01-01 -
Date of Expiration:
2007-09-01
China Standard Classification Number:
Machinery>>General Parts>>J11 Rolling Bearing
alternative situation:
Replaces JB 2850-80; replaced by JB/T 2850-2007
Focal point Organization:
Luoyang Bearing Research InstitutePublishing Department:
Luoyang Bearing Research Institute
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the technical requirements and inspection procedures for annealing, quenching and tempering of rolling bearing rings and rolling elements made of Cr4Mo4V high temperature bearing steel. This standard applies to the heat treatment inspection of rolling bearing parts made of this steel and finished parts. For bearing parts with special requirements, the requirements of the product drawings shall be followed. JB/T 2850-1993 Technical conditions for heat treatment of rolling bearing parts made of Cr4MO4V high temperature bearing steel JB/T2850-1993 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 9994-1999 55° cylindrical pipe thread tap
- GB/T 3745.2-1983 Compression fitting tee
- JB/T 6419-1992 Disc-type starch separator
- SY/T 5504-1996 Evaluation method for oil well cement retarders
- HG 21529-1995 Plate type flat welding flange hand hole. Attached picture
- HG/T 21574-1994 Chemical Equipment Lifting Lugs and Engineering Technical Requirements
- NY/T 646-2002 Specification for quality evaluation of screw conveyors
- GB/T 4130-2000 Low frequency calibration method for acoustic hydrophones
- JB/T 5813-1991 Technical requirements for winding wire enameling equipment
- GB/T 25894-2010 Escape and evacuation plan—Design principles and requirements
- GB/T 2855.12-1990 Die sliding guide die seat intermediate guide column circular lower die seat
- GB/T 3147-1982 Information processing unpunched paper tape
- SJ 3231-1989 Glass powder for soldering with low-melt point
- JB/T 6046-1992 Post-weld heat treatment method for carbon steel and low alloy steel welded components
- JB/T 7112-2000 Assembled high voltage shunt capacitors
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com