Technical data of Type DH-705 electronic glass

time: 2024-07-14 14:43:09
  • SJ/T 10591.2-1994
  • Abolished

Basic Information

standard classification number

  • China Standard Classification Number:

    General>>Standardization Management and General Provisions>>A01 Technical Management

associated standards

Publication information

Other Information

Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

SJ/T 10591.2-1994 Technical data of DH-705 type electronic glass SJ/T10591.2-1994 Standard download decompression password: www.bzxz.net



Standard contentStandard content

Some standard content:

Electronic industry standard of the People's Republic of China
SJ/T 10586~105S294
Electronic glass technical data
Electronic glass technical data1994-08-08 Issued
1994-12-01 Implementation
The Ministry of Electronics Industry of the People's Republic of China issued the Electronic Industry Standard of the People's Republic of China
DH-705 type electronic glass technical data
Tecbuical data of 1rpe DIL705 electroaie glass Main period and applicable specifications
This standard specifies the chemical composition and chemical properties of 13H·705 type electronic variable glass. This standard is applicable to color image tube screens and is made of the same material. 2 Reference standard
GB 9622
ST 3231~-322
3 Technical requirements
Standard method for chemical analysis of electronic products
Test method for non-chemical properties of electro-glass
Powder made of low melting point solder and its test method
3.1 Chemical composition is shown in Table 1.
The chemical performance index is shown in Table 3
Weight percentage (piece)
2.00±0.10
8.8±c.30
75.13±G.50
11.59±0.26
2.2±6. 20
Approved by the Ministry of Electronics Industry of the People's Republic of China on August 0, 1994 SJ/T10591.2-94
Inspection and Supervision and Administration
CB 9000.2
GB 9000. 6
1994-12-07
SJ/T 10591.2—94
0~-300Average thermal conductivity coefficient
Chilling point
Sulfur mobility
Adhesion type residual strength
Structural deformation
Additional instructions:
This standard is issued by the Standardization Research Institute of the Ministry of Electronics Industry, c
(28. 2:- 1. 5)×1-1
G.3 E 0.1
3E5±15
26.6--28.1
—5m~+50
This standard is issued by the Standardization Research Institute of the Ministry of Electronics Industry, c
(28. 2:- 1. 5)×1-1
G.3 E 0.1
3E5±15
26.6--28.1
—5m~+50
This standard is issued by the Standardization Research Institute of the Ministry of Electronics Industry, The main drafters of this standard: Guanghui Duan Yangsui, Liu Zhengjun, 72
Test methods
GB 9622 2www.bzxz.net
SJ 3232. 4
SJ 3231 Section 4.14 Cooking
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]