JB/T 9821-1999 Feed processing equipment types and basic parameters

JB/T 9821-1999 This standard is a revision of ZB B93 017.1-89 "Types and basic parameters of complete sets of feed processing equipment". This standard specifies the types and basic parameters of complete sets of feed processing equipment. This standard applies to complete sets of equipment used by compound feed mills and processing units to produce powdered and granular compound feed using grain feed, protein, vitamins and mineral additives as raw materials. This standard was first issued in 1989. JB/T 9821-1999 Types and basic parameters of complete sets of feed processing equipment JB/T9821-1999 standard download decompression password: www.bzxz.net

ICS65.040.20
Machinery Industry Standard of the People's Republic of China
JB/T9821-1999
The range of feed processing machine-Types and specifications
Published on August 6, 1999
National Bureau of Machinery Industry
Implemented on January 1, 2000
JB/T9821-1999
This standard is an editorial revision of ZBB93017.189 "Standard for Complete Sets of Feed Processing Equipment". The main technical content has not changed. This standard replaces ZBB93017.1-89 from the date of implementation. The revision of this standard was proposed and managed by the National Technical Committee for Agricultural Machinery Standardization. The responsible drafting unit of this standard is: Animal Husbandry Machinery Research Institute of China Academy of Agricultural Mechanization Sciences. The main drafters of this standard are: Huang Xiguo, Nan Xiaojing, Ge Xiaochu, Yang Bingnan, Gao Feng. This standard was first issued in 1989 and revised for the first time in 1999. Scope
Machinery Industry Standards of the People's Republic of China
Feed processing complete equipment
Types and basic parameters
The range of feed processing machine Types and specifications
This standard specifies the types and basic parameters of feed processing complete equipment. JB/T9821-1999
Replaces ZBB93017.1~-89
This standard applies to compound feed factories, and the processing units use grain feed, protein, vitamins and mineral element additives as raw materials to make powdered and granular compound feed. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. At the time of publication of this standard, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T5915-1986. Compound feed for piglets and growing and finishing pigs GB/T5916-1986 Compound feed for growing chickens, laying hens, and broiler chickens 3 Types and basic parameters
3.1 Complete sets of feed processing equipment are divided into two types: complete sets of equipment for compound feed factories and feed processing units. 3.1.1 Complete sets of equipment for compound feed factories should include storage, transportation, cleaning, selection, crushing, weight-based ingredient metering, mixing, granulation, weighing and packaging, electrical control, dust removal, steam and other auxiliary loading. 3.1.2 Complete sets of equipment for feed processing units can be combined according to crushing, mixing, granulation, transportation and other equipment, and the ingredient metering device can use manual weighing and batching or other weight metering methods. 3.1.3 The quality of the compound feed produced shall comply with the provisions of GB/T5915, GB/T5916 and other compound feed standards. 3.2 Model representation method
3.2.1 Main parameters of complete equipment for compound feed mills, expressed in productivity (th)
Feed mill phonetic alphabet initials
Compound phonetic alphabet initials
3.2.2 Feed processing unit
Main parameters, expressed in productivity (t/h)
Unit phonetic alphabet initials
Feed phonetic alphabet initials
Approved by the State Bureau of Machinery Industry on August 6, 1999 and implemented on January 1, 2000
JB/T9821-1999
The parameters of complete equipment for compound feed mills are shown in Table 1. The parameters of the feed processing unit are shown in Table 2. 3.3
Installed capacity)
Compound feed
Complete equipment
PS--15
Productivity!
1) Expressed as the productivity of producing strong chicken feed. 2) Does not include the power of electric boilers.
≤600
3) Does not include the material weight of the steel frame and metal workshop of the full steel frame structure used in the feed processing plant. Table 2
Compound feed
Complete equipment
SJ-2000
SJ-1500
SJ-1000
SJ-500
SJ-300
SJ-100
Productivity12
≥1500
≥300
1) Expressed as the productivity of producing laying hen feed. 2) Excluding the power of electric boiler.
Installed capacity?
3) Including the material weight of the steel frame and metal workshop of the all-steel structure of the feed processing plant 1. 2
Unit productivity
Total weight of equipment 3,
Unit productivitybzxZ.net
Total weight of equipment
Equipment use
Equipment use
Sustainability
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.