INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB 4814-1984 Log volume table

time: 2025-01-22 17:59:33
  • GB 4814-1984
  • in force

Basic Information

  • Standard ID:

    GB 4814-1984

  • Standard Name:

    Log volume table

  • Chinese Name:

    原木材积表

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1984-12-22

  • Date of Implementation:

    1985-12-01

standard classification number

  • Standard ICS number:

    Wood technology >> 79.040 Wood, logs and sawn timber

  • China Standard Classification Number:

    Agriculture & Forestry>>Forestry>>B68 Strips and Logs

associated standards

Publication information

  • publishing house:

    China Standards Press

  • Publication date:

    1985-12-01

Other Information

  • Release date:

    1984-12-22

  • Review date:

    2004-10-14

  • Drafting Organization:

    Chinese Academy of Forestry

  • Focal point Organization:

    National Technical Committee on Timber Standardization

  • Proposing Organization:

    Ministry of Forestry of the People's Republic of China

  • Publishing Department:

    State Administration of Standards

  • Competent Authority:

    State Forestry Administration
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

This standard is applicable to the calculation of log volume of all tree species. GB 4814-1984 Log volume table GB4814-1984 standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China
Log volume table
Log volume table
This standard applies to the calculation of log volume of all tree species. The volume of small-diameter logs with a gauge diameter of 4 to 12 cm is determined by the formula.
V=0.7854L (D+0.45L+0.2)2+ 10,0002The volume of logs with a gauge diameter of more than 14 cm is determined by the formula UDC 634.0.52
GB4814-84
V=0.7854L［D+0.5L+0.005L2 +0.000125L(14-L)2.(D-10)) 2 +10,000.
V-- volume, m3;
In the two formulas:
L-- length, m3
D-- diameter, cm.
3The length and diameter of logs shall be measured in accordance with the provisions of GB144.2-84 "Log Inspection Dimensions and Measurement". 4The volume of logs with a diameter of 4 to 6 cm shall be retained to four decimal places, and the volume of logs with a diameter of more than 8 cm shall be retained to three decimal places.
Promulgated by the National Bureau of Standards on December 22, 1984
Implemented on December 1, 1985
Measurement diameter, cm
GB 4814-84bzxz.net
.0.0059
Measurement diameter, cm
GB 4814-84
Measurement diameter, cm
GB 4814-84
0:0187
Measurement diameter, cm
GB 4814-84
Measurement diameter, cm
GB 4814--84
.0.319
.0.266
.0.511
.0.990
Gauge diameter, cm
GB 4814 -84
.3.829
Gauge diameter, cm
GB 4814-84
Gauge diameter, cm
GB 4814—84
Gauge diameter, cm
GB 4814 --84
Gauge diameter, em
GB 4814-84
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com