HG/T 2124-1991 Technical requirements for paddle agitators

HG/T 2124-1991 Technical Specifications for Paddle Agitators HG/T2124-1991 Standard download decompression password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
Technical Conditions for Paddle Agitators
1 Subject Content and Scope of Application
This standard specifies the requirements for the manufacture, inspection, packaging, storage and transportation of paddle agitators: This standard applies to steel welded paddle agitators. 2 Reference Standards
Technical Conditions for High-Quality Carbon Structural Steel
Carbon Structural Steel
GB 700
GB 983
GB 985
Stainless Steel Welding Rods
Basic Types and Sizes of Manual Electric Welding Joints GB 1184
GB1220
GB3274
GB 3280
GB 5117
GB 5118
Shape and position tolerances Provisions for tolerances not specified Stainless steel parts
Tolerances and fits Limit deviations of dimensions without tolerances Carbon structural steel and low alloy structural steel Hot-rolled thick plates and strips Stainless steel cold-rolled steel plates
Carbon steel welding rods
Low alloy steel welding rods
HG/T2123 Agitator types and main parameters 3 Types and key parametersbzxz.net
The type and main parameters of paddle agitators shall comply with the provisions of HG/T2123. 4 Technical requirements
HG/T 2124 -- 91
4.1 The materials for blades and reinforcing ribs shall be in accordance with the provisions of GB3274, GB700 and GB699. The materials for stainless steel shall be in accordance with the provisions of GB3280 and GB1220. The materials for fasteners shall comply with the drawings and the corresponding standard requirements. 4.2 The coating of the agitator shall comply with the corresponding technical requirements. 4.3 The welding of blades shall be continuous welding, and the reinforcing ribs may be intermittent welding. The type and size of the welded joint shall comply with the provisions of GB985: the welding rod shall comply with the provisions of GB 5117, GB 5118 and GB 983. 4.4 The linear speed of the blade end is <5m/s, and the static balance test may not be carried out. The welded blades and reinforcing ribs shall be symmetrical to reduce the unbalance factor.
4.5 The blade should be perpendicular to the axis of the shaft hole, and the perpendicularity tolerance is 0.4% of the total length of the blade and not more than 5mm. The flatness tolerance of the blade shall be in accordance with the 12th grade of GB 1184.
4:6 The limit deviation of the diameter and length of the agitator shall be in accordance with the 14th grade of GB1804: the limit deviation of the un-toleranced dimensions of the machined surface shall be in accordance with the 14th grade of accuracy; the limit deviation of the un-toleranced dimensions of the non-machined surface shall be in accordance with the 16th grade of accuracy. 4.7 The inclination angle deviation of the folded blade shall not exceed 3°. Approved by the Ministry of Chemical Industry of the People's Republic of China on August 19, 1991 and implemented on January 1, 1992
HG/T2124-91
The surface of the agitator shall be free of sharp edges and burrs, and the blade shall be flat 3 Inspection
The paddle agitator shall be inspected according to the drawings and this technical condition 5. 1
5.2 The error of the template and measuring tool used to detect the shape and size of the stirring paddle shall not exceed 1/5 of the tolerance of the measured size. 5.6 Packaging and replacement
The agitator should be treated with anti-rust.
6.2 Technical documents for the manufacture of agitators
Product manual, including name, diameter, material and weight, etc.; b.
Product quality certificate:
Product factory certificate:
Packing list.
6.3 Anti-magic, anti-damage and anti-moisture measures should be taken for product storage and transportation, and outdoor storage is not allowed. 64 When packaging the agitator, the agitator shaft should be prevented from bending and deformation, and the support for fixing the agitator shaft shall not be supported on the assembly part of the shaft. Additional Notes:
This standard was proposed by China National Chemical Equipment Corporation, and this standard was managed by the Chemical Industry Ministry's Chemical Machinery Equipment Standardization Technical Management Unit (Chemical Industry Ministry's Chemical Machinery Research Institute). This standard was drafted by Zhejiang University, Shanghai Chemical Engineering Design Institute, Guangdong Petrochemical Equipment Company Kaiping Machinery Guang participated in the drafting, and the main drafters of this standard were Zhang Duo, Wang Kai, and Lun Zufeng. W. Free download of customer standard industry information
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.