QB/T 3517-1999 Single-sided offset printing paper

QB/T 3517-1999 Single-sided offset printing paper QB/T3517-1999 Standard download decompression password: www.bzxz.net

Light Industry Standard of the People's Republic of China
Single-sided offset printing paper
1 Subject content and scope of application
This standard specifies the technical specifications of single-sided offset printing paper. This standard applies to single-sided offset printing paper used for printing color posters, cigarette boxes and trademarks. 2 Reference standards
GB/T450 Paper and paperboard sampling
GB/T451.1 Determination of size and deflection of paper and paperboardDetermination of basis weight of paper and paperboard
GB/T 451.2
GB/T 451.3
Determination of thickness of paper and paperboard
Determination of tensile strength of paper and paperboard (constant rate loading method)GB/T453
GB/T 456
GB/T 459
GB/T 460
GB/T462
GB/T 1541
GB/T 2828
GB/T 3331
Determination of smoothness of paper and paperboard (Buick method)Determination of paper elasticity
Determination of sizing degree of paper and paperboard (ink streaking method)Determination of moisture content of paper and paperboard
Determination of dust content of paper and paperboard
QB/T3517-1999
Replacement of ZBY32016-1989
Batch inspection counting sampling procedure and sampling table (applicable to inspection of continuous batches)Determination of printing surface strength of paper and paperboardGB/T8940.1Determination of whiteness of paper and paperboard (45/0 directional reflection method)GB/T10342Paper packaging and marking
3Product classification
3.1 Single-sided offset printing paper is divided into three grades: A, BC according to the technical quality level. 3.2 Single-sided offset printing paper is flat paper, and roll paper can be produced according to the requirements of the order contract. 3.3 The paper size is 880mm×1230mm, 787mm×1092mm or as specified in the contract. 3.4 The allowable deviation of flat paper size is not more than ±3mm, the skewness is not allowed to exceed 3mm, the full size deviation of roll paper is not allowed to exceed 3mm, and the number of broken ends is not allowed to exceed 4.
4 Technical requirements
The technical indicators of single-sided offset printing paper must comply with the provisions of Table 1. 4.1
Approved by the State Bureau of Light Industry on April 21, 1999
Implemented on March 1, 1999
Gluing degree
70～80
Indicator name
Breaking length (average value in longitudinal and transverse directions)
Expansion rate (after wetting)
Front surface smoothness
Dust degree
0.3～1.5mm2
1.5~2.5mm2
Of which: 1.0~1.5mm2
Black dust
greater than 1.5mm2Black dust
Delivery moisture
Surface strength
not less than
not less than
not less than
not less than
not greater than
not less than
not less than
QB/T 3517-—1999
pieces/m2
Note: 1) The reference index is not temporarily used as the basis for judging qualified products, but must be measured. 40±2.0
Not allowed
Not allowed
Not allowed
Not allowed
4.2 The paper shall not have obvious powdering and hair loss during printing. 4.3 The fiber structure of the paper shall be uniform and the color tone shall be consistent. The whiteness difference of the same batch of paper shall not exceed 3% (absolute value). C grade
Not allowed
4.4 The cutting edge of the paper shall be neat and clean.
4.5 The paper surface shall be flat, without sand, hard blocks, folds, wrinkles, cracks and holes visible to the light, obvious wool marks, fish scales and other paper defects that affect the appearance of use.
4.6 The following conditions are second-class products, but no more than two items shall be exceeded at the same time. The quantitative exceeds the specified allowable deviation value by ±2%. 4.6.1
The tear length is less than the specified value by 10%.
4.6.3 Whiteness is less than 3% (absolute value) of the specified value. 4.6.4
Dust content exceeds the specified value by less than 20%.
5 Test method
5.1 Dimensions, deflection, quantitative and tightness shall be measured in accordance with GB/T451.1, GB/T451.2 and GB/T451.3. 5.2 Gluing degree shall be measured in accordance with GB/T460 and shall meet the secondary standard line of penetration and diffusion contrast board. 5.3 Whiteness shall be measured in accordance with GB/T8940.1. 5.4 Break length shall be measured in accordance with GB/T453. 5.5 Shrinkage rate shall be measured in accordance with GB/T459. 5.6 Smoothness shall be measured in accordance with GB/T456. 551
HiiKAoNniKAca
QB/T3517—1999
5.7 Dust content shall be measured in accordance with GB/T1541. 5.8 Moisture content shall be measured in accordance with GB/T462. 5.9 Surface strength shall be measured in accordance with GB/T3331. 6 Inspection rules
6.1 One delivery shall be considered as a batch, but shall not exceed 30t. 6.2 The manufacturer shall ensure that the paper produced meets the requirements of this standard, and a certificate of conformity shall be attached to each piece of paper when it is delivered. 6.3 Acceptance inspection and sampling inspection shall be carried out in accordance with GB/T2828, and the sample unit shall be ream or roll. 6.4 Sampling shall be carried out according to the secondary normal sampling plan and the special inspection level S-4. The number of samples for acceptance inspection, the classification of unqualified products and their qualified quality level shall be as specified in Table 2.
Sampling plan
Ream (reel)
91~150
151~500
501～1200
12013200
Inspection level S-4
Second normal sampling
Class B nonconforming products
Sample size
13(26)
20(40)bZxz.net
.AQL=4.0
Class C nonconforming products
AQ1 = 6. 5
Classification of unqualified products
Class B unqualified products
Smoothness
Stretching rate
Class C unqualified products
Sizing degree
Dust degree
Appearance paper disease
6.5 The user has the right to check whether the quality of the batch of products meets the requirements of this standard. If the user has any objection to the quality of the products, he should notify the manufacturer to take samples for re-inspection within three months after the arrival of the goods. If it does not meet the requirements of this standard, it will be judged as a batch unqualified and the manufacturer will be responsible for handling it. 7 Marking, packaging, transportation, storage
7.1 The packaging and marking of single-sided offset printing paper shall be carried out in accordance with the provisions of GB/T10342 or the requirements of the order contract. 7.2 The paper should be properly stored to prevent the deterioration of the paper due to the influence of rain, snow and ground moisture. 7.3 During transportation, a canopied and clean transportation vehicle should be used. It is strictly forbidden to drop from a high place during unloading. 7.4 If the product deteriorates or is otherwise damaged due to storage and transportation not meeting the requirements of this standard, the party responsible for the loss shall be held responsible. Additional Notes:
This standard was proposed by the Papermaking Bureau of the Ministry of Light Industry. This standard is under the jurisdiction of the National Papermaking Standardization Center. This standard was drafted by Dandong Paper Mill. This standard is based on the Soviet standard rOCT9094-1970 "Offset Printing Paper". From the date of implementation of this standard, the former Ministry of Light Industry standard QB26-1973 "Single-sided Offset Printing Paper" will be invalid. 552
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.