JB/T 9162.6-1999 90° table seat dimensions
time:
2024-08-11 18:27:49
- JB/T 9162.6-1999
- in force
Standard ID:
JB/T 9162.6-1999
Standard Name:
90° table seat dimensions
Chinese Name:
90°表座 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.6-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.6-1999 JB/T 9162.6-1999 90° seat dimensions JB/T9162.6-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Standard of the Machinery Industry of the People's Republic of China
JB/T9162.1-9162.48--1999
Parts and components of inspection fixtures
The parts and units of inspection fixtures Issued on 1999-05-20bzxz.net
State Bureau of Machinery Industry
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
90° gauge base
Base wille rectangular coucavegndde-Dimensiuas
This standard specifies the types and sizes of 90° gauge pressure. Type and size
The types and sizes shall be as specified in the following figures and tables. A
Approved by the State Bureau of Machinery and Heat Industry on May 20, 1999 [R/T9161.6—1999
Substituted for Z date [44001.6-87
Implemented on January 1, 2000
Marking example:
JB/T9162.6—1999
-12mm, Z-150 A-type 90~ table base marking table library A12.×150JB/T9162.61999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
JB/T9162.1-9162.48--1999
Parts and components of inspection fixtures
The parts and units of inspection fixtures Issued on 1999-05-20bzxz.net
State Bureau of Machinery Industry
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
90° gauge base
Base wille rectangular coucavegndde-Dimensiuas
This standard specifies the types and sizes of 90° gauge pressure. Type and size
The types and sizes shall be as specified in the following figures and tables. A
Approved by the State Bureau of Machinery and Heat Industry on May 20, 1999 [R/T9161.6—1999
Substituted for Z date [44001.6-87
Implemented on January 1, 2000
Marking example:
JB/T9162.6—1999
-12mm, Z-150 A-type 90~ table base marking table library A12.×150JB/T9162.61999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 5417-1999 Whole fat unsweetened condensed milk and whole fat sweetened condensed milk
- JB/T 10396-2004 Reliability requirements for off-grid wind turbine generator sets
- GB/T 4789.13-2003 Microbiological examination of food hygiene-Examination of Clostridium perfringens
- SJ 2534.9-1985 Test procedures for antennas-Polarization measurement
- SY 0007-1999 Design specification for corrosion control engineering of steel pipelines and storage tanks
- GB/T 5463.3-1986 Terminology of non-metallic mineral products Gypsum and anhydrite
- HG/T 3119-1998 Tire curing press test method
- HG/T 3109-1988 Steel mechanical stirring vessel types and main parameters
- GB/T 17302.1-2008 Import and export licences messages of the Peoples Republic of China - Part 1: Import licence message
- GB/T 2915-1999 Determination of electrical conductivity of water extract of polyvinyl chloride resin
- GB/T 14656-1993 Test method for burning performance of flame retardant paper and paperboard
- JB/T 10117.2-1999 Machine tool fixture parts and components Clamping type internal center
- QB/T 2733-2005 Wire connection tools - Manual mechanical crimping pliers
- JB/T 5349.1-1991 Technical requirements for notching machines
- JB/T 1118-2001 F1 type float valve
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]