
JB/T 7090-1993 Waste Heat Boiler Parameter Series Oxygen Converter Waste Heat Boiler
time:
2024-08-08 16:36:12
- JB/T 7090-1993
- Abolished
Standard ID:
JB/T 7090-1993
Standard Name:
Waste Heat Boiler Parameter Series Oxygen Converter Waste Heat Boiler
Chinese Name:
余热锅炉参数系列 氧气转炉余热锅炉
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1993-10-08 -
Date of Implementation:
1994-01-01 -
Date of Expiration:
2006-08-21
China Standard Classification Number:
Machinery>>Piston Internal Combustion Engine and Other Power Equipment>>J98 Boiler and Auxiliary Equipment

Skip to download
Summary:
JB/T 7090-1993 Waste Heat Boiler Parameter Series Oxygen Converter Waste Heat Boiler JB/T7090-1993 Standard Download Decompression Password: www.bzxz.net

Some standard content:
1 Subject content and scope of application
Machinery Industry Standard of the People's Republic of China
Waste heat boiler parameter series
Oxygen converter waste heat boiler
This standard specifies the basic parameters of oxygen converter waste heat boilers. This standard is applicable to various types of oxygen converter waste heat boilers. Technical content
The basic parameters of oxygen converter waste heat boilers are generally specified in the following table. Table
Waste heat steel furnace inletbzxz.net
Gas volume
X10°m/h
Waste heat boiler inlet
Gas temperature
Approved by the Ministry of Machinery Industry on 1993-10-08
Rated steam pressure
Rated steam temperature
JB/T7090-
Average steam production during oxygen blowing period
Implemented on 1994-01-01
JB/T7090-93
Note: ① The data in brackets are rarely used in China at present and are generally not adopted. ② The gas volume at the inlet of the waste heat boiler refers to m/h at 0.101MPa (760mmHg), 0C. The feed water temperature of the waste heat boiler is 20℃ when the gas volume is not more than 17.9×10m/h, and 105℃ (with economizer) when the gas volume is more than 17.9×10m/h.
The average steam production during the oxygen blowing period is the theoretical calculated value of full vaporization under the condition of gas volume at the inlet of the waste heat boiler and gas temperature drop △t=600C. Since the steam production changes with the change of gas volume and gas temperature drop, the design unit can adjust it according to the specific situation in the design. Additional remarks:
This standard is proposed by the Ministry of Machinery Industry.
This standard is under the jurisdiction of Hangzhou Waste Heat Boiler Research Institute. This standard is drafted by Shanghai Hujiang Machinery Factory. The main drafters of this standard are Bingkui, Li Yufu, Zheng Faqing and Li Yunsen.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
Waste heat boiler parameter series
Oxygen converter waste heat boiler
This standard specifies the basic parameters of oxygen converter waste heat boilers. This standard is applicable to various types of oxygen converter waste heat boilers. Technical content
The basic parameters of oxygen converter waste heat boilers are generally specified in the following table. Table
Waste heat steel furnace inletbzxz.net
Gas volume
X10°m/h
Waste heat boiler inlet
Gas temperature
Approved by the Ministry of Machinery Industry on 1993-10-08
Rated steam pressure
Rated steam temperature
JB/T7090-
Average steam production during oxygen blowing period
Implemented on 1994-01-01
JB/T7090-93
Note: ① The data in brackets are rarely used in China at present and are generally not adopted. ② The gas volume at the inlet of the waste heat boiler refers to m/h at 0.101MPa (760mmHg), 0C. The feed water temperature of the waste heat boiler is 20℃ when the gas volume is not more than 17.9×10m/h, and 105℃ (with economizer) when the gas volume is more than 17.9×10m/h.
The average steam production during the oxygen blowing period is the theoretical calculated value of full vaporization under the condition of gas volume at the inlet of the waste heat boiler and gas temperature drop △t=600C. Since the steam production changes with the change of gas volume and gas temperature drop, the design unit can adjust it according to the specific situation in the design. Additional remarks:
This standard is proposed by the Ministry of Machinery Industry.
This standard is under the jurisdiction of Hangzhou Waste Heat Boiler Research Institute. This standard is drafted by Shanghai Hujiang Machinery Factory. The main drafters of this standard are Bingkui, Li Yufu, Zheng Faqing and Li Yunsen.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 2367-1990 Industrial sodium nitrite
- HG/T 2239-1991 H06-2 Iron red, zinc yellow, iron black epoxy ester primer
- GB 4706.61-2002 Particular requirements for safe use of liquid surface cleaning appliances for household and similar electrical appliances
- GB 12972.1-1991 Rubber-sheathed flexible cables for mining use Part 1: General provisions
- GB/T 15767-1995 General technical requirements for infrared remote control transmitters for video recorders
- JJG 171-2004 Verification Regulation of Ralative Density Balance for Liquid
- GB/T 15470-2002 家用直接作用式房间电加热器性能测试方法
- JG/T 141-2001 Pengruntu rubber water-swelling waterstop
- GB 4569-2000 Motorcycle noise limits and test methods
- GB/T 2423.12-1997 Environmental testing for electric and electronic products Part 2: Test method Test Fda: Broadband random vibration - High reproducibility
- SY/T 0059-1999 Technical specification for controlling the hardness of steel equipment welds to prevent sulfide stress cracking
- HG/T 2602-1994 Rubber cutting machine
- GB/T 20257.4-2017 Cartographic symbols for national fundamental scale maps—Part 4:Specifications for cartographic symbols 1∶250 000 1∶500 000 & 1∶1 000 000 topographic maps
- JB/T 9160.20-1999 Dimensions of cutting tool holder for single-spindle turret automatic lathe
- JB/T 5901-1991 Cross shaft universal coupling
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com