JB/T 9960-1999 Resistance spot welding convex electrode cap

This standard specifies the dimensions and tolerances of convex electrode caps for resistance spot welding. The axial taper of the electrode cap enables the electrode cap to be fixed on the internally taper electrode joint and to be fixed to the electrode holder. This standard applies to convex electrode caps for resistance spot welding under general use conditions. This standard is used in conjunction with JB/T9959-1999 "Electrode joints with internal taper 1:10 for resistance spot welding". JB/T 9960-1999 Convex electrode caps for resistance spot welding JB/T9960-1999 Standard download decompression password: www.bzxz.net

JB/T9960-1999
This standard is equivalent to ISO5830:1984 "Protruding electrode cap for resistance spot welding". This standard is a revision of ZBJ64011-88 "Protruding electrode cap for resistance spot welding". According to the requirements of GB/T1.1-1993 and GB/T1.3-1997, only editorial changes have been made to ZBJ64011-88. From the date of implementation, this standard will replace ZBJ64011-88. This standard is proposed and managed by the National Electric Welding Machine Standardization Technical Committee. The drafting unit of this standard: Shanghai Electric Welding Machine Factory. The main drafters of this standard: Jin Renfang, Chen Pinfa, Li Yinzhong. 121
Mechanical Industry Standard of the People's Republic of China
Resistance spot welding
Convex electrode cap
Resistance spot welding-male electrode capsThis standard specifies the dimensions and tolerances of convex electrode caps for resistance spot welding.JB/T9960-1999
idtIS05830:1984
Replaces ZBJ64011-88
The axial taper of the electrode cap enables the electrode cap to be fixed on the inner taper electrode joint and to be fixed to the electrode holder. This standard is applicable to convex electrode caps for resistance spot welding under general use conditions. This standard is used in conjunction with JB/T9959-1999 "Electrode joint with inner taper 1:10 for resistance spot welding". Note: The maximum electrode pressure Fx of the convex electrode cap specified in this standard should not exceed 4kN. Cited standards
The clauses contained in the following standards constitute the clauses of this standard through reference in this standard. At the time of publication of the standard, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. JB/T3957—1999
JB/T4281——1986
JB/T9959-—1999
3 Types and dimensions
Electrode taper matching dimensions of spot welding equipment (eqvISO1089:1980) Materials for resistance welding electrodes and accessories (eqvISO5182:1978) Electrode joints with internal taper of 1:10 for resistance spot welding (idtISO5829:1984) The types and dimensions of convex electrode caps are shown in Figure 1, in mm. 4
Chromium-zirconium-copper alloy (No. A2/2 in JB/T4281-1986) 5 Marking
The marking of the convex electrode cap for resistance spot welding that complies with this standard shall comply with the following provisions: \Type electrode cap JB/T9960—口口×
Convex electrode cap length
Convex electrode cap outer diameter
Convex electrode cap typeWww.bzxZ.net
This standard number
National Machinery Approved by the Bureau of Machinery Industry on August 6, 1999 122
Implemented on January 1, 2000
JB/T9960-1999
For example: the L-shaped convex electrode cap with an outer diameter of 16mm and a length of 25mm should be marked as: Convex electrode cap JB/T9960--L16×25
Note: The text part and the number of this standard can be omitted on the finished product of the convex electrode cap. Example: L16×25
Note: The other dimensions of the M and N type electrodes are alternate with the L type. 6
* is the reference line for taper measurement, and its matching size should be Φ11.8. 1-10
Other township
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.