INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 4188-1984 Molybdenum rod

time: 2024-09-20 12:35:00
  • GB/T 4188-1984
  • in force

Basic Information

  • Standard ID:

    GB/T 4188-1984

  • Standard Name:

    Molybdenum rod

  • Chinese Name:

    钼杆

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1984-03-09

  • Date of Implementation:

    1984-01-01

standard classification number

  • Standard ICS number:

    Metallurgy>>77.080 Ferrous Metals

  • China Standard Classification Number:

    Metallurgy>>Nonferrous metals and their alloy products>>H63 Rare high melting point metals and their compounds

associated standards

Publication information

Other Information

  • Release date:

    1984-03-09

  • Review date:

    2004-10-14

  • Drafting Organization:

    Shanghai Light Bulb Factory

  • Focal point Organization:

    Ministry of Information Industry (Electronics)

  • Publishing Department:

    Ministry of Information Industry (Electronics)

  • Competent Authority:

    Ministry of Information Industry (Electronics)
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

GB/T 4188-1984 Molybdenum Rod GB/T4188-1984 Standard Download Decompression Password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China
Molybdenumrods
This standard applies to molybdenum rods used to manufacture vacuum devices and electric light source parts. Brand, purpose and specifications
1.1 Brand and purpose shall comply with the provisions of Table 1. Table 1wwW.bzxz.Net
Note: Polished rod material should be used for lead-out wires. Use
to manufacture vacuum parts, gas tubes and electrodes of light bulbs, etc. UDC669.28-422
GB4188--84
to manufacture lead-out wires, support rods, side rods and other parts for electron tubes and electric light sources 1.2 The diameter range of the molybdenum rod shall comply with the provisions of Table 2. Table 2
Polished molybdenum:
The shortest length of the molybdenum rod shall comply with the provisions of Table 3. 1.3
Molybdenum rod diameter d
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com