HG/T 2052-1991 Transmission device for glass-lined equipment

HG/T 2052-1991 Transmission device for glass-lined equipment HG/T2052-1991 Standard download decompression password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
Sugar Glass Equipment
Subject Content and Scope of Application
Transmission Device
HG/T2052-91
This standard specifies the type, basic parameters, main dimensions, connection method with the agitator shaft head and installation structure with the sugar glass mixing container transmission device. This standard applies to sugar glass open mixing container and sugar glass closed mixing container. 2 Reference Standards
GB699 Technical Conditions for High-quality Carbon Structural Steel GB5675 Grey Castings
GB6414 Casting Dimension Tolerance
GB9147CWS Cylindrical Worm Reducer GB/T11351 Casting Weight Tolerance
HG5-745BLD Cycloidal Pin-tooth Planetary Reducer HG/T2048.1 Sugar Glass Stuffing Box
H G/T2048.2 Glass stuffing box with cooling water jacket HG/T2051.1 Glass anchor agitator
HG/T2051.2 Glass frame agitator
HG/T2051.3 Glass impeller agitator HG/T2051.4 Glass slurry agitator
3 Types, basic parameters and dimensions
3.1.1 The transmission device has two structural types, type I is shown in Figure 1, and type II is shown in Figure 2. The connection between the tapered small shaft and the stirring shaft head is also allowed to be manufactured according to the structure and dimensions of model III in Appendix A of this standard. The structure and dimensions of the intermediate bearing of model II are shown in Figure 5 and Table 10.3.1.2 The transmission method of model I is to use an arc cylindrical worm reducer for deceleration, and it is connected to the motor through a triangular belt drive to achieve the specified speed of the stirrer. The transmission method of model II is to use a motor direct-connected cycloidal pinwheel reducer for deceleration to achieve the specified speed of the stirrer. 3.1.3 The transmission device is specified to be driven by a Y series or YB series motor. 3.1.4 The output shaft of the model I reducer is connected to the shaft head of the type I pond glass stirrer with a rigid three-part coupling (Figure 3 and Table 3), and the output shaft of the model II reducer is connected to the inner tapered small shaft with a rigid flange coupling (Figure 4 Table 9). The inner conical small shaft is supported on the middle bearing of the machine base, and its conical end is fastened to the outer conical shaft head of the Type II glass stirrer by threaded connection, and a lock nut is used to prevent the connection from loosening (Figure 5, Table 10).
3.1.5 The base of the transmission device is installed on the support of the glass stirring container. The support has two structures: type A and type B. Type A support is suitable for glass stirring containers with a nominal volume of VN50L to 5000L; approved by the Ministry of Chemical Industry of the People's Republic of China on July 6, 1991 and implemented on January 1, 1992
HG/T2052-91
Type B support is suitable for glass stirring containers with a nominal volume of VN1000L to 20000L. 3.1.6. The shaft sealing device of the stirring container can be selected from stuffing box (HG/T2048) or mechanical seal (HG/T2057) according to the pressure level of the stirring container and the specific requirements of the medium in the container. 3.2 The basic parameters of the transmission device are in accordance with Table 1, Table 2, Table 3 and Table 4. 3.3 The main dimensions of the transmission device are in accordance with Figure 1, Figure 2, Table 6 and Table 7. 3.4 For the reference weight of the transmission device, see Table 5.
3.5 For the dimensions of the shaft heads of Type I and Type II glass stirrers connected to the shaft heads of the transmission device, see HG/T2051 "Portable Glass Stirrers"
1 Stirrer head
Shaft sealing device
Type A support
Type B support
Type B support
HG/T2052-91
Type II stirrer shaft head
Shaft sealing device
A-type support
Standard number
Standard number
HG5-745
HG/T2052—
Model I
V-belt drive
Circular solitary tooth cylindrical worm reducer
Three-part coupling
Model II
Cycloidal pinwheel planetary reducer
Steel Flange coupling
Inner tapered small shaft
Intermediate bearing
Lock nut
Details
Details
Assembly
Assembly
HG/T2052-91
000091
000000000000
000800090000wwW.bzxz.Net
s t0ss0
000001
HG/T2052→91
: Table 4 Basic parameters of transmission device
Tang glass agitator
anchor type, frame type
anchor type, frame type, paddle type
paddle type, impeller type
nominal speed
Note: The nominal speed is calculated based on the motor speed of 1450r/min.||tt| |Table 5 Reference weight of transmission device
Nominal volume of container VN
Note: The weight in the table does not include the weight of the motor 64
Nominal diameter of stirring shaft dN
Model I
Belt transmission ratio
Worm transmission ratio
Model II
HG/T2052--91
HG/T2052-91
0000 00
Agitator shaft
Nominal diameter
HG/T2052-91
Main dimensions of three-way coupling
Enlarged view
Nominal diameter of agitator shaft
Connection shaft diameter
Main dimensions of flange coupling
HG/T2052—91
HG/T2052—91
29-269
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.