JB/T 3627.6-1999 Tools and auxiliary levers for assembly of modular clamps

JB/T 3627.6-1999 This standard is a revision of JB 3627.6-84 "Tools and auxiliary tools for assembly of modular clamps", and is only re-edited according to relevant regulations. This standard is part of the series of standards for tools and auxiliary tools for assembly of modular clamps. JB/T 3627 "Tools and auxiliary tools for assembly of modular fixtures" includes the following 11 parts under the general title: Part 1 (JB/T 3627.1): Hexagonal socket wrench Part 2 (JB/T 3627.2): Electric wrench hexagonal head Part 3 (JB/T 3627.3): T-head four-jaw wrench Part 4 (JB/T 3627.4): Electric wrench four-jaw head Part 5 (JB/T 3627.5): Four-jaw wrench JB/T 3627.6-1999 Tools and auxiliary tools for assembly of modular fixtures JB/T3627.6-1999 Standard download decompression password: www.bzxz.net

ICS25.060.20
Machinery Industry Standard of the People's Republic of China
JB/T3627.6—1999
Tools and Auxiliary Tools for Assembly of Modular Clamps
Published on May 20, 1999
Implemented on January 1, 2000
State Bureau of Machinery Industry
JB/T3627.6—1999
This standard is a revision of JB3627.684 "Tools and Auxiliary Tools for Assembly of Modular Clamps". The original version was formulated according to the production characteristics of modular clamps, and its technical content can still meet the current scientific and technological level and meet the needs of production and use. This standard is consistent with the technical content of JB3627.684, and has only been re-edited according to relevant regulations. This standard is part of the series of standards for tools and auxiliary tools for assembly of modular clamps. JB/T3627 "Tools and accessories for assembly of modular fixtures" includes the following 11 parts under the general title: Part 1 (i.e. JB/T3627.1): Hexagonal wrench Part 2 (i.e. JB/T3627.2): Electric wrench hexagonal head Part 3 (i.e. JB/T3627.3): T-shaped four-jaw wrench Part 4 (i.e. JB/T3627.4): Electric wrench four-jaw head Part 5 (i.e. JB/T3627.5): Four-jaw wrench Part 6 (ie JB/T3627.6): lever part 7 (ie JB/T3627.7): copper hammer part 8 (ie JB/T3627.8): drilling fixture inspection rod part 9 (ie JB/T3627.9): boring fixture inspection rod part 10 (ie JB/T3627.10): hollow boring fixture inspection rod part 11 (ie JB/T3627.11): connection plate This standard replaces JB3627.684 from the date of implementation. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of the Combined Fixture Branch of the National Technical Committee for Standardization of Metal Cutting Machine Tools. The responsible drafting unit of this standard: Tianjin Combined Fixture Factory Assembly Station The main drafter of this standard: Li Guiyu.
This standard was first issued in May 1984.
1 Scope
Machinery Industry Standard of the People's Republic of China
Tools and Auxiliary Tools for Assembly of Modular Clamps
This standard specifies the structural dimensions, technical requirements and markings of the lever. This standard applies to the assembly of 12mm slot modular clamp components. 2 Structure and Dimensions
The structure and dimensions are shown in Figure 1.
3 Technical Requirements
Material: 45.
3.2 Heat Treatment: Quenching 38~42HRC.
3.3 Surface Treatment: Bluing.
Marking example
901505
19.5×420
National Machinery Industry Bureau approved JB/T3627.6-1999 on May 20, 1999
Replaced JB3627.6—84
Implemented on January 1, 2000
Mechanical industry standard
Tools and auxiliary tools for assembly of modular fixtures
JB/T3627.6—1999||tt| |Published and distributed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing, Postal Code 100044)*
K Number of words XXX,XXX
Format 880×1230
Printing sheet x/X
Xth printing in xx month of 19XXWww.bzxZ.net
Xth edition in XX month of 19XX
Number of prints 1-XXX
Price XXXXX Yuan
XX-XXX
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.