HG/T 20519.14-1992 Pipeline isometric index and pipe section table index
time:
2024-08-14 10:06:53
- HG/T 20519.14-1992
- in force
Standard ID:
HG/T 20519.14-1992
Standard Name:
Pipeline isometric index and pipe section table index
Chinese Name:
管道轴测图索引和管段表索引
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1993-01-18 -
Date of Implementation:
1993-04-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Technical Drawing>>01.100.01 Technical Drawing General 71.010China Standard Classification Number:
>>>>G0 Engineering Construction>>Raw Materials Industry, Communications, Broadcasting Engineering>>P72 Petrochemical, Chemical Engineering
Skip to download
Summary:
HG/T 20519.14-1992 Pipeline Axonometric Index and Pipe Segment Table Index HG/T20519.14-1992 Standard Download Decompression Password: www.bzxz.net
Some standard content:
Index of pipeline isometric drawings and
index of pipe section table
HG 20519.14-92
Index of pipeline isometric drawings and index of pipe section table
HG20519.14-92
1 Index of pipeline isometric drawings
(1) In principle, for units with electronic computers, the index of pipeline isometric drawings should be compiled by electronic computers for easy modification. The format and content of the index should still be compiled in the handwritten format and content. (2) This table should be compiled by zone and should not be mixed. (3) If there is no electronic computer or the number of isometric drawings is very small, the handwritten format shall be used. The format is shown in Example 1. 2 Pipeline section table index
(1) For some engineering projects, the contract does not provide isometric drawings (or DN≤1-prepare the pipe section table index, the format is shown in Example 2. Special\ pipes) but only provide pipe section tables, which should (2 Pipeline numbers of the same medium should be grouped together, and at least 1 to 2 spaces should be left between pipe numbers of different media to facilitate supplementation and avoid confusion.
(3) Prepared by area.
See Example 1
Pipeline isometric drawing index
Example Table 2 Index of pipe section table
Pipeline number
Axonometric drawing suffix
Project name:
Design project:
Pipeline number
Axonometric drawing suffix
Pipeline axonometric drawing index (Example table 1)
Page of pages
Pipeline numberwww.bzxz.net
Page edition!
Pipeline number
Project name:
Design project:
Page edition
Pipe section table index (Example table 2)
Pipeline number
Page edition
Page of pages
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
index of pipe section table
HG 20519.14-92
Index of pipeline isometric drawings and index of pipe section table
HG20519.14-92
1 Index of pipeline isometric drawings
(1) In principle, for units with electronic computers, the index of pipeline isometric drawings should be compiled by electronic computers for easy modification. The format and content of the index should still be compiled in the handwritten format and content. (2) This table should be compiled by zone and should not be mixed. (3) If there is no electronic computer or the number of isometric drawings is very small, the handwritten format shall be used. The format is shown in Example 1. 2 Pipeline section table index
(1) For some engineering projects, the contract does not provide isometric drawings (or DN≤1-prepare the pipe section table index, the format is shown in Example 2. Special\ pipes) but only provide pipe section tables, which should (2 Pipeline numbers of the same medium should be grouped together, and at least 1 to 2 spaces should be left between pipe numbers of different media to facilitate supplementation and avoid confusion.
(3) Prepared by area.
See Example 1
Pipeline isometric drawing index
Example Table 2 Index of pipe section table
Pipeline number
Axonometric drawing suffix
Project name:
Design project:
Pipeline number
Axonometric drawing suffix
Pipeline axonometric drawing index (Example table 1)
Page of pages
Pipeline numberwww.bzxz.net
Page edition!
Pipeline number
Project name:
Design project:
Page edition
Pipe section table index (Example table 2)
Pipeline number
Page edition
Page of pages
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 15120.1-1994 Identification card recording technology Part 1: Embossed printing
- JB/T 10006-1999 Internal micrometer
- GB 2505-1989 Marine cast copper flange (four-position)
- GB/T 3916-1997 Textiles - Determination of breaking strength and elongation of single yarn in packaged yarn
- QB 1784-1993 Peach aldehyde
- JB/T 6740.3-1993 Current-type starting relay for small fully enclosed refrigeration motors-compressors
- GB 4706.40-2003 Safety of household and similar electrical appliances Particular requirements for commercial multi-purpose electric cookers
- GB/T 5120.2-1995 Chemical analysis of crude copper - Determination of arsenic content
- GB/T 9061-1988 General technical requirements for metal cutting machine tools
- NY/T 1436-2007 Wax Apple
- JB/T 5244-2001 Electromagnet for hydraulic valve
- FZ/T 92018-2001 Flat steel ring
- HG 21537.5-1992 Carbon steel stuffing box for pipe (PN0.6)
- QB/T 2231-1996 General technical requirements for inflatable toys
- NY/T 1706-2009 Code of practice of risk analysis for alien insect Rhynchophorus ferrugineus(Olivier)
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com