JB/T 8010.11-1999 Machine tool fixture parts and components U-shaped pressure plate
time:
1999-08-06 15:00:00
- JB/T 8010.11-1999
- in force
Standard ID:
JB/T 8010.11-1999
Standard Name:
Machine tool fixture parts and components U-shaped pressure plate
Chinese Name:
机床夹具零件及部件 U 形压板
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
JB/T 8010.11-1995 (original standard number GB/T 2185-1991)
Description (Translated English) / downloadSkip to download
Summary:
JB/T 8010.11-1999 JB/T 8010.11-1999 Machine tool fixture parts and components U-shaped pressure plate JB/T8010.11-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS 25. 080. 01
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06Promulgated
State Bureau of Machinery Industry
Implementation on 2000-01-01
1 Scope
Machinery Industry Standard of the People's Republic of China
Parts and units of jigs and fixturesU-clampplate
This standard specifies the U-clamp plates applicable to thread specifications of M12 to M48. 2 Reference standards
JB/T 8010.111999
JB/T8010.11—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. Technical conditions for high-quality magnetic structural steel
GB/T699—1988
Technical requirements for machine tool fixture parts and components
JB/T8044-1999
3 Dimensions
The dimensions are shown in the following figure and table.
The rest 9
Approved by the State Machinery Industry Bureau on August 6, 1999 Type B
Implemented on January 1, 2000
Nominal diameter
(thread diameter)
4 Technical conditions
4.1 Material: 45 steel in accordance with GB/T699. 4.2 Heat treatment: 35~40HRC.
4.3 Other technical conditions in accordance with JB/T8044. 5 MarkingWww.bzxZ.net
5.1 Marking example:
JB/T8010.11-1999
U-shaped pressure plate with nominal diameter = 24mm and L = 250mm Type A pressure plate A24×250JB/T8010.11—199990
Expanded length L,=
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06Promulgated
State Bureau of Machinery Industry
Implementation on 2000-01-01
1 Scope
Machinery Industry Standard of the People's Republic of China
Parts and units of jigs and fixturesU-clampplate
This standard specifies the U-clamp plates applicable to thread specifications of M12 to M48. 2 Reference standards
JB/T 8010.111999
JB/T8010.11—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. Technical conditions for high-quality magnetic structural steel
GB/T699—1988
Technical requirements for machine tool fixture parts and components
JB/T8044-1999
3 Dimensions
The dimensions are shown in the following figure and table.
The rest 9
Approved by the State Machinery Industry Bureau on August 6, 1999 Type B
Implemented on January 1, 2000
Nominal diameter
(thread diameter)
4 Technical conditions
4.1 Material: 45 steel in accordance with GB/T699. 4.2 Heat treatment: 35~40HRC.
4.3 Other technical conditions in accordance with JB/T8044. 5 MarkingWww.bzxZ.net
5.1 Marking example:
JB/T8010.11-1999
U-shaped pressure plate with nominal diameter = 24mm and L = 250mm Type A pressure plate A24×250JB/T8010.11—199990
Expanded length L,=
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 8649.1-1997 Accuracy test of CNC printed circuit board drilling machines
- JB/T 8850-2001 Vibration mill
- JB/T 6130-1992 Industrial weighing filling machine types and basic
- GB/T 14680-1993 Air quality-Determination of carbon disulfide-Diethylamine spectrophotometric method
- JB/T 20041-2004 Reciprocating pill cutting machine
- JG/T 152-2003 Steel multifunctional door frame profiles
- GB/T 19038-2009 Guidelines for model and methods of customer satisfaction measurement
- QB/T 1624-1992 Vertical universal sanding machine
- SY/T 0029-1998 Test method for corrosion rate of buried steel inspection pieces
- HG 2038-1991 Vertical Mortar Mixer
- GB/T 9204.1-1988 Fixed top parameters
- JJG 150-2005 Verification Regulation of Metallic Brinell Hardness Testers
- GB 8780-1988 Hygienic standard for dimethylacetamide in workshop air
- JB/T 50033-1999 Internal combustion engine cooling water pump bench reliability assessment
- SL 72-1994 Economic evaluation specification for water conservancy construction projects SL 72-94
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com