JB/T 1009-1991 YS series three-phase asynchronous motor technical conditions
time:
1991-06-28 16:00:00
- JB/T 1009-1991
- Abolished
Standard ID:
JB/T 1009-1991
Standard Name:
YS series three-phase asynchronous motor technical conditions
Chinese Name:
YS系列三相异步电动机 技术条件
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1991-06-28 -
Date of Implementation:
1992-07-01 -
Date of Expiration:
2007-07-01
China Standard Classification Number:
Electrician>>Rotating Electric Machine>>K22 Asynchronous Motor
alternative situation:
Replaced JB 1009-77; replaced by JB/T 1009-2007Procurement status:
neq IEC 34 etc.
Focal point Organization:
National Rotating Electrical Machinery Standardization Committee Small Power Motor BranchPublishing Department:
National Rotating Electrical Machinery Standardization Committee Small Power Motor Branch
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the type, basic parameters and dimensions, technical requirements, test methods and inspection rules of YS series three-phase asynchronous motors, as well as marking and packaging requirements. JB/T 1009-1991 YS series three-phase asynchronous motor technical conditions JB/T1009-1991 Standard download and decompression password: www.bzxz.net
Standard contentSome standard content:
Pressing Machinery Ring Industry Standard of the People's Republic of China JB/T10091991
1991-06-284
1992-07-01
G20P xEe/
1 theme content and scope of application
Invitation
JB/T10091991
New B1009
This standard specifies the type, basic parameters and dimensions, technical requirements, and test methods of YS series three-phase asynchronous motors and inspection rules as well as marking and packaging requirements.
This standard applies to YS series three-phase asynchronous motors (frame number 4590) (hereinafter referred to as motors). Various motors derived from this series of motors can also be implemented with reference. 2 Reference standards
GB4831
Motor product model compilation method
Basic technical requirements for rotating electrical machines
Outside the motor Protection classification
GB2900.25
: Electrical terminology motor
GB2900.27 Electrical terminology small power motor GB1993
GB4772.1| |tt||GB1032
GB10069
GB10068
GB5171
GB12665
GB12350
GB2828||tt ||JB/Z294
Motor cooling method
Motor structure and installation type code
Motor size and tolerance Frame number 36~400 Flange number FF55~FF1080 or FT55~FT1080 Test methods for three-phase asynchronous motors
Measurement methods and limits for noise of rotating machines
Measurement methods and limits for vibration of rotating machines
General technical conditions for small power motors
Packaging Storage and transportation pictorial mark
Damp heat test requirements for motors used under general environmental conditions Safety requirements for small power motors
Batch-by-batch inspection and counting sampling procedures and sampling tables AC low-voltage motor scattered winding inter-plaque insulation test Method JB/DQ3619 General Principles for Quality Grading of Small Power Motor Products 3 Types, Basic Parameters and Dimensions
3.1 The shell protection level of the motor is IP44. 3.2 Cooling method of the motor: 63 and above frame numbers are IC0141, 56 and above The following frame number is IC0041. 3.3 The structure and installation type of the motor are manufactured according to the provisions of Table 1. 3.4 The motor rating is a continuous rating based on the continuous working system (S1). The rated rate of the 3.5 motor is 50Hz. The rated voltage is 220V/380V, and the frame size of 71 and below can also be 380V. 3.6 The motor should be manufactured according to the following rated power: 10, 16, 25, 40, 60, 90, 120, 180, 250, 370, 550, 750, 1100, 1500, 2200W. 3.7 The corresponding relationship between the motor's frame number, speed and power should be as specified in Table 2. 1991-06-28
1992-07-01
Dimensions and tolerances of motors
JB/T10091991
The installation dimensions and tolerances of the motor should comply with the provisions of Table 3 to Table 7, and the overall dimensions should not be larger than the provisions of Table 3 to Table 7. Table
Frame number
Frame number
Core code
2|| tt||1
Structure and installation code (IM)||tt| |B3, B14, B34, V5, V6, V18, V19B3, B5, B14, B34, V1, V3, Vs, V6, V18, V19B3, B5, B14, B34, B35, V1, V3, V5, V6, V18 , V19, V36 table
120||tt ||180
Same as
370| |tt||550
rate||tt ||-
Frame number
(IMV5 , IMV6)
JB/T10091991
Picture
Note: The top of the motor at the location of the outlet box can also be placed on the side according to user requirements. The dotted line in the figure indicates the side outlet box. Qiu
90||tt ||100
40||tt ||45
Deviation
±0.20||tt| |±0.25
71||tt| |80
Deviation
±1.0| |tt||±1.5
installation
deviation|| tt||+0.007
+0.008|| tt | | -0.003 | Basic
Extreme| |tt||Deviation
±0.310. |tt||basic
deviation
6|| tt||8
11|| tt||15.5
c.10|| tt||0
50||tt ||56
??????
deviation
0| |tt||K
位作度
小店尺
100| |tt||110
90||tt ||100
170| |tt||230
机座号
45| |tt||50
凸缘号
FT55| |tt||FT 65
IMB14|| tt||(IMV18,IMV19)
假悪|| tt||±0.260
F||tt ||最合
[北京
注，1）P 北京的最好最合值。
2）R的凸级运动面至辆伸肩的运动借差
0| |tt||尺
JB/T1009%
basic
|tt|| deviation
4| |tt||N
75||tt ||85
80. 0.012
B0|| tt||90
R2)||tt ||差
位作度|| tt||尺4
eo.5?||tt| $1.0? 0. |130
230|| tt||255
凸绿号
45FT45| |tt||50
FT85||tt ||IMB34
注，出线羒美在电影机机长部，最合电影电影，可以支持例面。图中虚线设计设计出线盒。安
A/21. |11256
80FT100|12562.5
FT11514070
±0.20|| tt||±0.25
基度基度
尺只时
deviation
1| |tt||14
Deviation
+0.008| |tt||-0.003
30| | tt | | 40 |
3) R is the distance from the flange mating surface to the shaft opening. E
installation
deviation
deviation
JB/T1009 Yuan 1991
Picture
Basic limit
0.20||tt ||Extreme
Deviation
Inch deviation
56||tt| |63
pleasure difference
+0,360
public
Basic Basic
Position
Tolerance
Dimensions
45||tt| |55
Basic Basic
Bercha
Position Basic
DimensionswwW.bzxz.Net
Tolerance
Dimensions| |tt||Ms
Deviation
Outline size ≤
ABACADHDL
145| |tt||130
180185
25||tt ||160
Frame number flange number|| tt||63
90SFF165
IMB5||tt| |(IMV1,IMV3)
Chizhou
24| |tt||limit
difference
this| |tt||E
Chisheng
Deviation|| tt||±0.260
Note: 1) P size is the maximum limit value, | |tt||2) R is the distance from the flange mating surface to the shaft fan, 6
installation
deviation
Basic Technique
20||tt| |JB/T10091991
Picture
partiality
0.10||tt ||0
Basic Basic
Chisheng
and||tt ||Limit
Deviation
165130
9.009||tt| |+0.014
public
basic basic limit
Chizhou deviation
offset||tt ||10+0.360
Basic positioning
Dimensions
Tolerance
Deviation
145||tt| |165
275| |tt||300
Machine painted flange number
number
(IMV36)||tt ||JB/T1009 yuan 1991
method; the outlet box is located at the top of the motor, and can also be placed on the front according to user requirements. The line in the figure represents the side outlet box. An
basic basis
limit basic basic limit
size Size
Deviation
FF165140
Size Size deviation
Very inch
100||tt| |±0.50
Deviation||tt ||+0.009
-0,004
raise||tt ||50±0.310
Note: 1) When the deer foot hole K is an oblong hole or the position is qualified, the assessment of A/22》P size is the maximum limit value.
3) R is the height from the flange mating surface to the shaft extension shoulder. basic
quinoa
life difference
Deviation
Figure|| tt||Table
only thing||tt ||Size deviation
Camera
+0,260|| tt||0
Disk control
Hip difference
Public
Basic version
Alliance
Du Yuan
Editor
9, 0m1
Basic|| tt | | s0 | Setting basic
180185
JB/T10091991| |tt||3.8.2 The size and tolerance of the motor shaft extension key shall comply with the provisions of Table 8. 3.8.3 The radial circular runout tolerance at half the shaft extension length shall comply with the provisions of Table 9. 3.8.4 The radial circular runout tolerance of the flange stop to the motor axis and the end face circular runout tolerance of the flange mating surface to the motor axis should comply with the provisions of Table 10
3.8.5 The motor axis to the foot bearing surface The parallelism tolerance shall comply with the provisions of Table 11. 3.8.6 | | tt | | 3.8.7 | | tt | table
convex
straight
11| |tt||14
stretch
diameter
straight
>6～10
> 10～18
>18～30
110~130||tt| |Heart
45～50
>5090
Straight
Diameter
Diameter
H||tt ||key
11| |tt||key
Radial circular runout tolerance
circle
row||tt ||motion
degree
public
public
difference
difference
4 The radial circular runout tolerance of the flange stop to the motor axis and the end face circular runout tolerance of the flange mating surface to the motor axis should comply with the provisions of Table 10
3.8.5 Parallelism of the motor axis to the foot support surface Degree tolerances shall comply with Table 11. 3.8.6 | | tt | | 3.8.7 | | tt | table
convex
straight
11| |tt||14
stretch
diameter
straight
>6～10
> 10～18
>18～30
110~130||tt| |Heart
45～50
>5090
Straight
Diameter
Diameter
H||tt ||key
11| |tt||key
Radial circular runout tolerance
circle
row||tt ||motion
degree
public
public
difference
difference
4 The radial runout tolerance of the flange stop to the motor axis and the end runout tolerance of the flange mating surface to the motor axis shall comply with the provisions of Table 10.
3.8.5 The parallelism tolerance of the motor axis to the foot support surface shall comply with the provisions of Table 11. 3.8.6
The flatness tolerance of the motor foot support surface shall comply with the provisions of Table 12. The symmetry tolerance of the keyway on the motor shaft extension shall comply with the provisions of Table 13. Table
Convex
Straight
Extension
Diameter
Straight
>6～10
>10～18
>1 8～30
Center
110~130
Center
Height
45～50
>5090
Straight
Diameter
Diameter
Radial runout tolerance
Circular
Runout
Movement
Degree
Height
Difference
Difference
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
1991-06-284
1992-07-01
G20P xEe/
1 theme content and scope of application
Invitation
JB/T10091991
New B1009
This standard specifies the type, basic parameters and dimensions, technical requirements, and test methods of YS series three-phase asynchronous motors and inspection rules as well as marking and packaging requirements.
This standard applies to YS series three-phase asynchronous motors (frame number 4590) (hereinafter referred to as motors). Various motors derived from this series of motors can also be implemented with reference. 2 Reference standards
GB4831
Motor product model compilation method
Basic technical requirements for rotating electrical machines
Outside the motor Protection classification
GB2900.25
: Electrical terminology motor
GB2900.27 Electrical terminology small power motor GB1993
GB4772.1| |tt||GB1032
GB10069
GB10068
GB5171
GB12665
GB12350
GB2828||tt ||JB/Z294
Motor cooling method
Motor structure and installation type code
Motor size and tolerance Frame number 36~400 Flange number FF55~FF1080 or FT55~FT1080 Test methods for three-phase asynchronous motors
Measurement methods and limits for noise of rotating machines
Measurement methods and limits for vibration of rotating machines
General technical conditions for small power motors
Packaging Storage and transportation pictorial mark
Damp heat test requirements for motors used under general environmental conditions Safety requirements for small power motors
Batch-by-batch inspection and counting sampling procedures and sampling tables AC low-voltage motor scattered winding inter-plaque insulation test Method JB/DQ3619 General Principles for Quality Grading of Small Power Motor Products 3 Types, Basic Parameters and Dimensions
3.1 The shell protection level of the motor is IP44. 3.2 Cooling method of the motor: 63 and above frame numbers are IC0141, 56 and above The following frame number is IC0041. 3.3 The structure and installation type of the motor are manufactured according to the provisions of Table 1. 3.4 The motor rating is a continuous rating based on the continuous working system (S1). The rated rate of the 3.5 motor is 50Hz. The rated voltage is 220V/380V, and the frame size of 71 and below can also be 380V. 3.6 The motor should be manufactured according to the following rated power: 10, 16, 25, 40, 60, 90, 120, 180, 250, 370, 550, 750, 1100, 1500, 2200W. 3.7 The corresponding relationship between the motor's frame number, speed and power should be as specified in Table 2. 1991-06-28
1992-07-01
Dimensions and tolerances of motors
JB/T10091991
The installation dimensions and tolerances of the motor should comply with the provisions of Table 3 to Table 7, and the overall dimensions should not be larger than the provisions of Table 3 to Table 7. Table
Frame number
Frame number
Core code
2|| tt||1
Structure and installation code (IM)||tt| |B3, B14, B34, V5, V6, V18, V19B3, B5, B14, B34, V1, V3, Vs, V6, V18, V19B3, B5, B14, B34, B35, V1, V3, V5, V6, V18 , V19, V36 table
120||tt ||180
Same as
370| |tt||550
rate||tt ||-
Frame number
(IMV5 , IMV6)
JB/T10091991
Picture
Note: The top of the motor at the location of the outlet box can also be placed on the side according to user requirements. The dotted line in the figure indicates the side outlet box. Qiu
90||tt ||100
40||tt ||45
Deviation
±0.20||tt| |±0.25
71||tt| |80
Deviation
±1.0| |tt||±1.5
installation
deviation|| tt||+0.007
+0.008|| tt | | -0.003 | Basic
Extreme| |tt||Deviation
±0.310. |tt||basic
deviation
6|| tt||8
11|| tt||15.5
c.10|| tt||0
50||tt ||56
??????
deviation
0| |tt||K
位作度
小店尺
100| |tt||110
90||tt ||100
170| |tt||230
机座号
45| |tt||50
凸缘号
FT55| |tt||FT 65
IMB14|| tt||(IMV18,IMV19)
假悪|| tt||±0.260
F||tt ||最合
[北京
注，1）P 北京的最好最合值。
2）R的凸级运动面至辆伸肩的运动借差
0| |tt||尺
JB/T1009%
basic
|tt|| deviation
4| |tt||N
75||tt ||85
80. 0.012
B0|| tt||90
R2)||tt ||差
位作度|| tt||尺4
eo.5?||tt| $1.0? 0. |130
230|| tt||255
凸绿号
45FT45| |tt||50
FT85||tt ||IMB34
注，出线羒美在电影机机长部，最合电影电影，可以支持例面。图中虚线设计设计出线盒。安
A/21. |11256
80FT100|12562.5
FT11514070
±0.20|| tt||±0.25
基度基度
尺只时
deviation
1| |tt||14
Deviation
+0.008| |tt||-0.003
30| | tt | | 40 |
3) R is the distance from the flange mating surface to the shaft opening. E
installation
deviation
deviation
JB/T1009 Yuan 1991
Picture
Basic limit
0.20||tt ||Extreme
Deviation
Inch deviation
56||tt| |63
pleasure difference
+0,360
public
Basic Basic
Position
Tolerance
Dimensions
45||tt| |55
Basic Basic
Bercha
Position Basic
DimensionswwW.bzxz.Net
Tolerance
Dimensions| |tt||Ms
Deviation
Outline size ≤
ABACADHDL
145| |tt||130
180185
25||tt ||160
Frame number flange number|| tt||63
90SFF165
IMB5||tt| |(IMV1,IMV3)
Chizhou
24| |tt||limit
difference
this| |tt||E
Chisheng
Deviation|| tt||±0.260
Note: 1) P size is the maximum limit value, | |tt||2) R is the distance from the flange mating surface to the shaft fan, 6
installation
deviation
Basic Technique
20||tt| |JB/T10091991
Picture
partiality
0.10||tt ||0
Basic Basic
Chisheng
and||tt ||Limit
Deviation
165130
9.009||tt| |+0.014
public
basic basic limit
Chizhou deviation
offset||tt ||10+0.360
Basic positioning
Dimensions
Tolerance
Deviation
145||tt| |165
275| |tt||300
Machine painted flange number
number
(IMV36)||tt ||JB/T1009 yuan 1991
method; the outlet box is located at the top of the motor, and can also be placed on the front according to user requirements. The line in the figure represents the side outlet box. An
basic basis
limit basic basic limit
size Size
Deviation
FF165140
Size Size deviation
Very inch
100||tt| |±0.50
Deviation||tt ||+0.009
-0,004
raise||tt ||50±0.310
Note: 1) When the deer foot hole K is an oblong hole or the position is qualified, the assessment of A/22》P size is the maximum limit value.
3) R is the height from the flange mating surface to the shaft extension shoulder. basic
quinoa
life difference
Deviation
Figure|| tt||Table
only thing||tt ||Size deviation
Camera
+0,260|| tt||0
Disk control
Hip difference
Public
Basic version
Alliance
Du Yuan
Editor
9, 0m1
Basic|| tt | | s0 | Setting basic
180185
JB/T10091991| |tt||3.8.2 The size and tolerance of the motor shaft extension key shall comply with the provisions of Table 8. 3.8.3 The radial circular runout tolerance at half the shaft extension length shall comply with the provisions of Table 9. 3.8.4 The radial circular runout tolerance of the flange stop to the motor axis and the end face circular runout tolerance of the flange mating surface to the motor axis should comply with the provisions of Table 10
3.8.5 The motor axis to the foot bearing surface The parallelism tolerance shall comply with the provisions of Table 11. 3.8.6 | | tt | | 3.8.7 | | tt | table
convex
straight
11| |tt||14
stretch
diameter
straight
>6～10
> 10～18
>18～30
110~130||tt| |Heart
45～50
>5090
Straight
Diameter
Diameter
H||tt ||key
11| |tt||key
Radial circular runout tolerance
circle
row||tt ||motion
degree
public
public
difference
difference
4 The radial circular runout tolerance of the flange stop to the motor axis and the end face circular runout tolerance of the flange mating surface to the motor axis should comply with the provisions of Table 10
3.8.5 Parallelism of the motor axis to the foot support surface Degree tolerances shall comply with Table 11. 3.8.6 | | tt | | 3.8.7 | | tt | table
convex
straight
11| |tt||14
stretch
diameter
straight
>6～10
> 10～18
>18～30
110~130||tt| |Heart
45～50
>5090
Straight
Diameter
Diameter
H||tt ||key
11| |tt||key
Radial circular runout tolerance
circle
row||tt ||motion
degree
public
public
difference
difference
4 The radial runout tolerance of the flange stop to the motor axis and the end runout tolerance of the flange mating surface to the motor axis shall comply with the provisions of Table 10.
3.8.5 The parallelism tolerance of the motor axis to the foot support surface shall comply with the provisions of Table 11. 3.8.6
The flatness tolerance of the motor foot support surface shall comply with the provisions of Table 12. The symmetry tolerance of the keyway on the motor shaft extension shall comply with the provisions of Table 13. Table
Convex
Straight
Extension
Diameter
Straight
>6～10
>10～18
>1 8～30
Center
110~130
Center
Height
45～50
>5090
Straight
Diameter
Diameter
Radial runout tolerance
Circular
Runout
Movement
Degree
Height
Difference
Difference
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 15295-1994 Series and types of hybrid integrated circuit high-frequency broadband amplifiers for cable distribution systems
- GB 5514-1985 Inspection of grains and oilseeds - Determination of starch
- JB/T 10027-1999 Square angle ruler
- RB/T 242.3-2018 Requirements for green products certification bodies—Part 3:Renewable energy utilization
- GB 2367-1990 Industrial sodium nitrite
- GB/T 19657-2005 Thermal test source lamps for heating tests on lamps
- HG/T 2546-1993 Heat transfer oil-400 (biphenyl-biphenyl ether mixture)
- GB 17733.1-1999 Place name signs for urban and rural areas
- GB/T 5687.5-1988 Chemical analysis methods for ferrochromium - Determination of carbon content by infrared absorption method
- GB/T 8243.1-2003 Test methods for full-flow oil filters for internal combustion engines Part 1: Pressure differential-flow characteristics
- GB/T 17980.114-2004 Pesticide-Guidelines for the field efficacy trials(II)-Part 114:Bactericides against soft rot of Chinese cabbage
- GB 7037-1992 Retreading and repairing tires (bias)
- GB 5906-1997 X-ray diagnosis of pneumoconiosis
- GB 5749-1985 Sanitary standard for drinking water
- HG/T 2575-1994 Determination of the wetting power of surfactants - Immersion method
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]