GB/T 15829.4-1995 Soldering flux Inorganic flux
time:
2024-08-08 14:37:13
- GB/T 15829.4-1995
- Abolished
Standard ID:
GB/T 15829.4-1995
Standard Name:
Soldering flux Inorganic flux
Chinese Name:
软钎焊用钎剂 无机物类钎剂
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-02 -
Date of Implementation:
1996-08-01 -
Date of Expiration:
2009-01-01
Standard ICS number:
Mechanical manufacturing>>Welding, brazing and low-temperature welding>>25.160.20 Welding consumablesChina Standard Classification Number:
Machinery>>Processing Technology>>J33 Welding and Cutting
alternative situation:
Replaced by GB/T 15829-2008
Release date:
1995-12-14Review date:
2004-10-14Drafter:
Xue Songbai, Li XianzhenDrafting Organization:
Harbin Welding Research Institute of the Ministry of Machinery, Dongguang County Metal Welding Material Factory of Hebei ProvinceFocal point Organization:
National Welding Standardization Technical CommitteeProposing Organization:
Ministry of Machinery Industry of the People's Republic of ChinaPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Standardization Administration
Skip to download
Summary:
This standard specifies the technical requirements, test methods, inspection rules, transportation and storage of inorganic soldering fluxes. This standard is applicable to inorganic soldering fluxes used in various soldering methods with a soldering temperature below 450°C. GB/T 15829.4-1995 Soldering flux Inorganic soldering flux GB/T15829.4-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 7870-1997 Thin-walled metal pipes and fittings for sprinkler irrigation
- GB/T 15832-1995 General technical requirements for wheeled and crawler tractors for forestry
- JB/T 10354-2002 Industrial boiler operation regulations
- JB/T 8005.1-1999 Machine tool fixture parts and components press-fit threaded bushings
- JG/T 21-1999 Performance test methods for air coolers and air heaters
- GB/T 4248-2004 Technical requirements for hand-held 1:50 taper pin reamers
- GB 30000.16-2013 Rules for classification and labelling of chemicals—Part 16:Organic peroxides
- SY/T 0407-1997 Specification of steel surface preparation before application of paint
- JB/T 5000.9-1998 General technical conditions for heavy machinery cutting parts
- JB/T 8558-1997 Asbestos/polytetrafluoroethylene mixed packing
- HG/T 2647-1994 Technical requirements for length measuring machines for ordinary V-belts and narrow V-belts
- JB/T 3566.2-1999 Technical requirements for driving machines for circulating freight cars on aerial ropeways
- GB/T 9115.3-2000 Tongue and groove welded steel pipe flanges
- GB 14738-1993 Technical conditions for use of wire rope slings for port loading and unloading
- JB/T 6296.6-1992 Technical specifications for flexible graphite seals for steam turbine piping accessories
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com