JB/T 1472-1994 Mechanical seals for pumps

This standard replaces JB 1472-75. This standard specifies the basic types, main dimensions, model representation methods, technical requirements, etc. of mechanical seals for pumps. This standard is applicable to rotary mechanical seals and other mechanical seals similar to rotating shafts. JB/T 1472-1994 Mechanical seals for pumps JB/T1472-1994 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T1472-94
Mechanical seals for pumps
Published on July 26, 1994
Ministry of Machinery Industry of the People's Republic of China
Implementation on July 1, 1995
Mechanical Industry Standard of the People's Republic of China
Mechanical seals for pumps
1 Subject content and scope of application
JB/T 1472-94
Replacement JB1472-75
This standard specifies the basic types, main dimensions, model indication methods, technical requirements, etc. of mechanical seals for pumps. This standard applies to rotary machine seals and other mechanical seals for similar rotating shafts. 2 Reference standards
GB1184
GB10444
JB4127
JB4236
ZBJ22002
ZBJ22003
ZBJ22004
ZBJ22006
ZBJ22017
ZBJ22022
Slotted cone point set screws
Provisions for shape and position tolerances without tolerances Method for compiling mechanical seal product models||t t||Technical conditions for mechanical seals
Test specifications for mechanical seals
O-ring rubber seals for mechanical seals
Carbide seal rings for mechanical sealsCylindrical helical springs for mechanical seals
Technical conditions for acceptance of mechanical seal products
Technical conditions for carbon graphite seals for mechanical sealsTechnical conditions for filled polytetrafluoroethylene and polytetrafluoroethylene for mechanical seals
Basic types, dimensions, parameters and material codes3
Basic types
Mechanical seals for pumps are divided into seven basic types Type: 103: built-in single-end single spring unbalanced and spring-driven mechanical seal, see Figure 1; b.
B103: built-in single-end single spring balanced and spring-driven mechanical seal, see Figure 2; 104: built-in single-end single spring unbalanced sleeve drive, see Figure 3: its derivative 104a is shown in Figure 4; B104: built-in single-end single spring unbalanced sleeve drive, see Figure 5; its derivative B104a is shown in Figure 6105: built-in single-end multi-spring unbalanced screw drive, see Figure 7; B105: built-in single-end multi Spring balanced screw drive, see Figure 8; Type 114: external single-end single spring over-balanced dial drive, see Figure 9. Its derivative type 114a is shown in Figure 10.3.2 Main dimensions
Type 103 see Table 1;
Type B103 see Table 2;
Type 104 see Table 3, Type 104a see Table 4;
Type B104 see Table 5, Type B104a see Table 6
Type 105 see Table 7;
Type B105 see Table 8;
Type 114 see Table 9, Type 114a see Table 10.
Approved by the Ministry of Machinery Industry on July 26, 1994
Implemented on July 1, 1995
3.3 Basic parameters
The basic parameters of the seven basic types are shown in Table 11, JB/T1472-94
Figure 1103 type mechanical seal
1-Anti-rotation pin; 2-Auxiliary seal diagram, 3-Stationary ring: 4-Rotating ring: 5-Auxiliary seal diagram: 6-Push ring, 7-Spring, 8-Spring seat, 9-Set screwTable 1
103 type mechanical seal
JB/T1472-94
|Figure 2B103 type mechanical seal
1-Anti-rotation pin: 2-Auxiliary sealing surface: 3-Stationary ring: 4-Swivel ring: 5-Auxiliary sealing surface, 6-Push ring: 7-Spring; 8-Spring seat; 9-Fixed burst nailTable 2
B103 type mechanical seal
JB/T1472~-94
Figure 3104 type mechanical sealWww.bzxZ.net
1-Anti-rotation ring: 2-Seal surface: 3-Stationary ring: 4-Swivel ring: 5-Customer sealing surface6-Push ring; 7-Spring: 8--Spring seat: 9-Fixed burst nailTable 3
104 type mechanical seal
JB/T 147294
Figure 4104a type mechanical seal
1-anti-rotation pin: 2-stationary ring seal box: 3-stationary ring; 4-rotating ring: 5-rotating ring seal diagram; 6-sealing gasket, 7-male ring; 8-spring; 9-transmission seat table 4
104a type mechanical seal
Note: 104a type mechanical seal is the source GX type mechanical seal, D
JB/T 1472--94
Figure 5B104 type machine mold seal
1 anti-rotation pin: 2-sealing diagram, 3-stationary ring, +-chain swivel; 5-sealing diagram 6-push ring, 7-spring; 8-spring seat: 9-fastening screw table 5
BI04 type mechanical seal
JB/T1472-94
Figure 6B104a type mechanical seal
1-anti-rotation pin; 2-sealing diagram, 3-stationary ring: 4-swivel ring: 5-closed diagram: 6-sealing gasket: 7-push Ring: 8-spring: 9-transmission seat table 6
Note: B104a type mechanical seal is the original GY
type mechanical seal,
type mechanical seal
JB/T1472--94
Figure 7105 type mechanical seal
1-anti-rotation pin: 2-auxiliary seal diagram: 3-stationary ring: 4-travel swivel ring; 5-auxiliary seal diagram, 6-transmission pin, 7-push ring, 8-spring: 9-tightening nail: 10-spring seat: 11-transmission screw table 7105 type mechanical seal
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.