
GB 18401-2001 Limitation of formaldehyde content in textiles
time:
2001-08-06 15:00:00
- GB 18401-2001
- in force
Standard ID:
GB 18401-2001
Standard Name:
Limitation of formaldehyde content in textiles
Chinese Name:
纺织品甲醛含量的限定
Standard category:
National Standard (GB)
-
Date of Release:
2001-08-06 -
Date of Implementation:
2003-01-01
Standard ICS number:
Textile and Leather Technology >> Textile Products >> 59.080.01 Textile Products GeneralChina Standard Classification Number:
Textile>>Textile Comprehensive>>W04 basic standards and general methods
alternative situation:
Replaced by GB 18401-2003
publishing house:
China Standard PressISBN:
155066.1-17874Publication date:
2004-10-04
Publishing Department:
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

Skip to download
Summary:
This standard specifies the limit values, test methods and determination rules for formaldehyde content in textiles. This standard applies to textiles and textile products. Products with special uses can be implemented in accordance with relevant agreements or regulations. GB 18401-2001 Limitation of formaldehyde content in textiles GB18401-2001 Standard download and decompression password: www.bzxz.net

Some standard content:
GB18401-2001 | good. However, during the processing, wearing or use of these textiles and their products, the formaldehyde on the products will have adverse effects on the human body. Therefore, limiting the formaldehyde content in textiles is of great significance to protecting the human health of producers and consumers of textiles and clothing.
This standard stipulates formaldehyde content limit values ??based on the end-use classification of textiles. The test method adopts GB/T2912.1-1998 "Determination of formaldehyde in textiles - Part 1: Free hydrolyzed formaldehyde (water extraction method)". This standard was proposed by the former State Textile Industry Bureau. This standard is under the jurisdiction of the National Textile Standardization Technical Committee. This standard is drafted by the Textile Industry Standardization Institute, the State Entry-Exit Inspection and Quarantine Bureau, the Guangdong Entry-Exit Inspection and Quarantine Bureau and the Shanghai Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard: Zheng Yuying, Lu Weimin, Dong Hongming, Song Xiushun, Hao Yilei. 1 Scope
National Standard of the People's Republic of China
Limitations of formaldehyde content in textiles
Textiles-Limit to formaldehyde content This standard specifies the limit values, test methods and judgment rules for formaldehyde content in textiles . GB18401-2001
This standard applies to textiles and textile products. Products with special uses can be implemented in accordance with relevant agreements or regulations. 2 Referenced standards
The provisions contained in the following standards constitute provisions of this standard by being quoted in this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties using this standard should explore the possibility of using the latest version of the standard listed below. GB/T2912.1-1998 Determination of formaldehyde in textiles Part 1: Free hydrolyzed formaldehyde (water extraction method) GB/T8629-2001 Home washing and drying procedures for textile testing 3 Product classificationwwW.bzxz.Net
3.1 According to the product End uses are divided into four categories, including fabrics and trims used to process these products. 3.1.1 Products for infants and young children: refers to textiles and textile products used by infants and young children under 24 months of age. That is, products that are clearly judged to be for infants based on product features, size, or specifications; or products that are clearly intended for infants in the instructions for use, advertisements, or at the time of sale.
3.1.2 Products in direct contact with skin: Textiles and textile products in which most of the area of ??the product is in direct contact with human skin when worn or used.
3.1.3 Products not in direct contact with skin: Textiles or textile products that do not come into direct contact with human skin when worn or used, or only a small part of the product is in direct contact with human skin. . 3.1.4 Indoor decoration products: textiles and textile products used indoors (including cars, ships, airplanes, etc.). 3.2 Specific products are divided according to their end uses. Table 1 gives examples of typical uses of each type of product. Table 1 Examples of uses of various products
Infant category
Direct contact with skin category||Indirect skin contact category
Interior decoration category| |tt||4 Formaldehyde content limit value
Examples of typical uses
Diapers, diapers, underwear, mouths, pajamas, gloves, socks, tops, outerwear, hats, bedding, bras, belly Belts, knitted underwear, shirts, pants, skirts, pajamas, socks, sheets, quilts, sweaters, outerwear, skirts, pants
The formaldehyde content of tablecloths, curtains, sofa covers, bedspreads, wall coverings, textiles and textile products should be Comply with the requirements of Table 2. Approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on 2001-08-06 and implemented on 2003-01-01
5 sampling
Infant and young children
Direct contact with skin Category
Non-direct contact with skin category
Interior decoration category
GB18401—2001
Table 2 Formaldehyde content limit value
5.1 According to relevant product regulations or both parties The agreement shall be executed, otherwise it shall be executed according to 5.2~5.5. Formaldehyde content, mg/kg
5.2 Randomly select samples from each batch of products, 1 of each color samples, but take at least 3 samples per batch. 3 Take samples at least 2m away from the end of the cloth. The size of each sample is the entire width with a length of not less than 0.5m. 5.3
5.4 A single piece of clothing or products shall be considered as one sample. 5.5 After the sample is taken, it should be sealed and placed without any processing. 6 Test methods
6.1 Determination of formaldehyde content according to GB/T2912.1. 6.2 For products marked with "wash before use" in the instructions for use, wash once using procedure 8A in GB/T8629 and dry using method A, and then measure the formaldehyde content according to GB/T2912.1.
7 Judgment Rules
If the test result of a sample exceeds the limit value in Table 2, the entire batch of products will be judged to have unqualified formaldehyde content.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
This standard stipulates formaldehyde content limit values ??based on the end-use classification of textiles. The test method adopts GB/T2912.1-1998 "Determination of formaldehyde in textiles - Part 1: Free hydrolyzed formaldehyde (water extraction method)". This standard was proposed by the former State Textile Industry Bureau. This standard is under the jurisdiction of the National Textile Standardization Technical Committee. This standard is drafted by the Textile Industry Standardization Institute, the State Entry-Exit Inspection and Quarantine Bureau, the Guangdong Entry-Exit Inspection and Quarantine Bureau and the Shanghai Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard: Zheng Yuying, Lu Weimin, Dong Hongming, Song Xiushun, Hao Yilei. 1 Scope
National Standard of the People's Republic of China
Limitations of formaldehyde content in textiles
Textiles-Limit to formaldehyde content This standard specifies the limit values, test methods and judgment rules for formaldehyde content in textiles . GB18401-2001
This standard applies to textiles and textile products. Products with special uses can be implemented in accordance with relevant agreements or regulations. 2 Referenced standards
The provisions contained in the following standards constitute provisions of this standard by being quoted in this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties using this standard should explore the possibility of using the latest version of the standard listed below. GB/T2912.1-1998 Determination of formaldehyde in textiles Part 1: Free hydrolyzed formaldehyde (water extraction method) GB/T8629-2001 Home washing and drying procedures for textile testing 3 Product classificationwwW.bzxz.Net
3.1 According to the product End uses are divided into four categories, including fabrics and trims used to process these products. 3.1.1 Products for infants and young children: refers to textiles and textile products used by infants and young children under 24 months of age. That is, products that are clearly judged to be for infants based on product features, size, or specifications; or products that are clearly intended for infants in the instructions for use, advertisements, or at the time of sale.
3.1.2 Products in direct contact with skin: Textiles and textile products in which most of the area of ??the product is in direct contact with human skin when worn or used.
3.1.3 Products not in direct contact with skin: Textiles or textile products that do not come into direct contact with human skin when worn or used, or only a small part of the product is in direct contact with human skin. . 3.1.4 Indoor decoration products: textiles and textile products used indoors (including cars, ships, airplanes, etc.). 3.2 Specific products are divided according to their end uses. Table 1 gives examples of typical uses of each type of product. Table 1 Examples of uses of various products
Infant category
Direct contact with skin category||Indirect skin contact category
Interior decoration category| |tt||4 Formaldehyde content limit value
Examples of typical uses
Diapers, diapers, underwear, mouths, pajamas, gloves, socks, tops, outerwear, hats, bedding, bras, belly Belts, knitted underwear, shirts, pants, skirts, pajamas, socks, sheets, quilts, sweaters, outerwear, skirts, pants
The formaldehyde content of tablecloths, curtains, sofa covers, bedspreads, wall coverings, textiles and textile products should be Comply with the requirements of Table 2. Approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on 2001-08-06 and implemented on 2003-01-01
5 sampling
Infant and young children
Direct contact with skin Category
Non-direct contact with skin category
Interior decoration category
GB18401—2001
Table 2 Formaldehyde content limit value
5.1 According to relevant product regulations or both parties The agreement shall be executed, otherwise it shall be executed according to 5.2~5.5. Formaldehyde content, mg/kg
5.2 Randomly select samples from each batch of products, 1 of each color samples, but take at least 3 samples per batch. 3 Take samples at least 2m away from the end of the cloth. The size of each sample is the entire width with a length of not less than 0.5m. 5.3
5.4 A single piece of clothing or products shall be considered as one sample. 5.5 After the sample is taken, it should be sealed and placed without any processing. 6 Test methods
6.1 Determination of formaldehyde content according to GB/T2912.1. 6.2 For products marked with "wash before use" in the instructions for use, wash once using procedure 8A in GB/T8629 and dry using method A, and then measure the formaldehyde content according to GB/T2912.1.
7 Judgment Rules
If the test result of a sample exceeds the limit value in Table 2, the entire batch of products will be judged to have unqualified formaldehyde content.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB 10227-2001 Safety protection technical conditions for gear shaving machines
- GB 16487.10-1996 Environmental Protection Control Standard for Imported Waste Waste Hardware and Electrical Appliances
- JB/T 3736.2-1994 Cause-effect diagram, a statistical tool commonly used in quality management
- GB 11799-1989 Marine explosion-proof centrifugal fans
- JB/T 3753-1999 Dimensions of spindle end for 3:20 taper hole of jig boring machine
- JB/T 8773-1998 Technical requirements for precision machining centers
- SY 5307-1987 General technical requirements for assembly of petroleum drilling machinery products
- GB 12698-1990 Sanitary Standard for Yellow Rice Wine Factory
- JB/T 6013-2000 Technical Specifications for Low-pressure Metal Oil Pipe Assemblies for Diesel Engines
- GB/T 20430-2006 Acoustics―Noise control design procedures for open plant
- LY/T 1611-2003 Fiberboard for floor substrates
- JB/T 8487.1-2002 Technical requirements for piston lathes
- GB/T 5009.105-2003 Determination of chlorothalonil residues in cucumbers
- JB/T 8485.1-1996 Technical requirements for gear shaving machines
- LB/T 025-2013 Scenic byways and byways recreational facilities standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com