GB 16487.10-1996 Environmental Protection Control Standard for Imported Waste Waste Hardware and Electrical Appliances

GB 16487.10-1996 Environmental Protection Control Standard for Imported Waste Waste Hardware and Electrical Appliances GB16487.10-1996 Standard download and decompression password: www.bzxz.net

GB16487.10—1996
Foreword
This standard is recommended to implement the "Interim Provisions on Environmental Protection Management of Waste Imports" promulgated by the state and to control hazardous waste contained in imported hardware and electrical appliances that can be used as raw materials. environmental pollution caused. This standard will be implemented on a trial basis from August 1, 1996. This standard is proposed by the Pollution Control Department of the National Environmental Protection Administration. The National Environmental Protection Administration is responsible for interpreting this standard. 1Scope
National Standard of the People's Republic of China
Environmental protection control standard for imported scrap
Scrap hardware and electrical appliances
(Trial)
Environmental protection control standard for imported scrap material | | tt | This standard applies to the import of scrap hardware and electrical appliances. 2 Reference Standards
SN0579-1996 Inspection Regulations for Imported Scrap Metal and Electrical Appliances (Trial) GB8703--88 Radiation Protection Regulations
SN0570-·-1996 Inspection Regulations for Radioactive Contamination of Imported Scrap Metal (Trial) GB5085.3 —1996 Hazardous Waste Identification Standard Leaching Toxicity GB13015-91 Standard for Pollution Control of Waste Containing Polyfluorobiphenyls GB/T15555.1~15555.12-1995 Solid Waste Leachability Determination Method 3 Definition
This standard adopts the following definitions: || tt | . 4 Control standards and requirements
4.1 It is prohibited to mix imported scrap hardware and electrical appliances with entrained waste whose concentration of harmful substances in the liquid exceeds the identification standard value in GB5085.3-1996.
4.2 It is prohibited to mix waste with polychlorinated biphenyl content exceeding the recommended value of the control standard in GB13015--91 in imported scrap hardware and electrical appliances. 4.3 Imported scrap hardware and electrical appliances are prohibited from being mixed with entrained waste whose leachate pH value is equal to or greater than 12.5 and equal to or less than 2. 4.4 It is prohibited to carry radioactive waste in imported scrap hardware and electrical appliances. 4.5 The radioactive material pollution control indicators in imported scrap hardware and electrical appliances should comply with the requirements of GB8703-88 regarding the control level of radioactive material pollution on the surface of objects.
4.6 The total weight of the following entrained wastes in imported scrap hardware and electrical appliances shall not exceed one ten thousandth of the weight of imported scrap hardware and electrical appliances: State Environmental Protection Administration approved on 1996-07-29 and implemented on 1996-08-01||tt| |a)
Explosive waste;
Incineration disposal residue;
GB16487.10-1996
Wastes of beryllium, hexavalent chromium, selenium, cadmium, antimony, tellurium, mercury, thallium, lead and their compounds, wastes containing fluorine, cyanide and phenolic compounds; various liquid wastes;
d)| |tt||e)
clinical waste;
kitchen waste, bathroom waste;bzxZ.net
closed containers, etc.
In addition to the wastes listed in the above items, other entrained materials in imported scrap hardware and electrical appliances that cannot be directly utilized during their processing and utilization 4.7
materials, waste paper, waste fabrics, muck, stripped rust, and scrap hardware and electrical appliances that are not allowed to be imported by the state, etc.) The total weight shall not exceed 4% of the weight of imported scrap hardware and electrical appliances. 5 Inspection
5.1 The inspections in Articles 4.1 and 4.3 of this standard shall be carried out in accordance with the provisions of GB/T15555.1~15555.12--1995. 5.2 The inspection in Article 4.2 of this standard shall be carried out in accordance with the provisions of GB13015-91. 5.3 The inspections in Articles 4.4 and 4.5 of this standard shall be carried out in accordance with the provisions of SN0570-1996. 5.4 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of SN0579-1996.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.