
JB/T 2001.12-1999 Types and dimensions of circular flanges for water systems (PN=10MPa)
time:
2024-08-14 17:10:29
- JB/T 2001.12-1999
- in force
Standard ID:
JB/T 2001.12-1999
Standard Name:
Types and dimensions of circular flanges for water systems (PN=10MPa)
Chinese Name:
水系统 圆附接法兰 型式与尺寸(PN=10MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2012-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical CommitteePublishing Department:
Metallurgical Equipment Standardization Technical Committee

Skip to download
Summary:
JB/T 2001.12-1999 This standard is a revision of JB 2012-84 "Types and dimensions of circular flanges for hydraulic presses (Pg=100×100000Pa)". This standard specifies the types and dimensions of circular flanges. This standard is applicable to hydraulic systems with a nominal pressure of 10MPa. This standard was first published on January 1, 1984. JB/T 2001.12-1999 Types and dimensions of circular flanges for water systems (PN=10MPa) JB/T2001.12-1999 Standard download decompression password: www.bzxz.net

Some standard content:
IC.s$ 23.110
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system
Round attached flange
Type and size
[PN-10 MPa]
Note that the plastic type and size of the internal connection flange of this standard are specified in this standard. The nominal pressure of 10MPa is used to stop the liquid multi-system. 2 Reference standards
JR/T2001.111999
2012—84
The texts contained in the following standards are the texts of this standard that are cited in this standard or are the texts of this standard: When this standard is published, the versions shown are valid. All revisions will be affected: The parties using this standard should explore the possibility of using the following standards to prevent the occurrence of new versions, JB2001.5[999 Type and size of copper flanges for water systems 3 Type and size
3.1 The type should comply with the provisions of medical 1,bZxz.net
—Probe: 2—Flame: 3—Flange: 4-Connection: 5—Pre-drawing
Approved by the State Administration of Machinery Industry on 1990-06-28 20-01-1 Implementation
JB/T2001.13-1999
I C91ZLT! GET
+tr'1002 8e
172i r
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system
Round attached flange
Type and size
[PN-10 MPa]
Note that the plastic type and size of the internal connection flange of this standard are specified in this standard. The nominal pressure of 10MPa is used to stop the liquid multi-system. 2 Reference standards
JR/T2001.111999
2012—84
The texts contained in the following standards are the texts of this standard that are cited in this standard or are the texts of this standard: When this standard is published, the versions shown are valid. All revisions will be affected: The parties using this standard should explore the possibility of using the following standards to prevent the occurrence of new versions, JB2001.5[999 Type and size of copper flanges for water systems 3 Type and size
3.1 The type should comply with the provisions of medical 1,bZxz.net
—Probe: 2—Flame: 3—Flange: 4-Connection: 5—Pre-drawing
Approved by the State Administration of Machinery Industry on 1990-06-28 20-01-1 Implementation
JB/T2001.13-1999
I C91ZLT! GET
+tr'1002 8e
172i r
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 1619-2002 Technical requirements for the manufacture of shell boilers
- GB/T 15393-1994 Galvanized layer of steel wire
- JB/T 8771.5-1998 Inspection conditions for machining centers Part 5: Inspection of positioning accuracy and repeatability of workpiece holding plates
- JB/T 2602-2001 Combined crawler assembly for construction machinery
- GB/T 15710-1995 Silicon-barium alloy
- GB 19305-2003 Hygienic standard for plant fiber food containers
- GB 15563-1995 Seismic source grain
- JB/T 4311.10-1991 Indirect resistance furnace SG series experimental crucible resistance furnace
- GB/T 11449.5-1989 Waveguide flanges Part 6: Specification for medium flat rectangular waveguide flanges
- GB/T 3789.20-1991 Test method for electrical performance of transmitting tubes Test method for first grid current cut-off voltage
- HG/T 20547-2000 Chemical powder and granular product packaging measurement accuracy requirements
- HG/T 3063-1999 Comparative method for the color of precipitated hydrated silica in rubber compounding ingredients
- GBJ 25-1990 Building Code for Collapsible Loess Areas GBJ25-90
- GB 7256.1-1987 General requirements for technical conditions of civil airport lighting fixtures
- GB/T 29859-2013 Bioinformatics terms
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com