GB/T 15916-1995 Determination of surfactant chelating agent content Titration method
time:
2024-08-08 13:05:08
- GB/T 15916-1995
- in force
Standard ID:
GB/T 15916-1995
Standard Name:
Determination of surfactant chelating agent content Titration method
Chinese Name:
表面活性剂 螯合剂含量的测定 滴定法
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-02 -
Date of Implementation:
1996-08-01
Standard ICS number:
Chemical Technology>>Chemical Products>>71.100.40 Surfactants and other additivesChina Standard Classification Number:
Chemical Industry>>Chemical Additives, Surfactants, Catalysts, Water Treatment Agents>>G72 Basic Standards and General Methods for Surfactants
Release date:
1995-12-20Review date:
2004-10-14Drafting Organization:
Shanghai Dyestuff Research InstituteFocal point Organization:
China Petroleum and Chemical Industry AssociationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Petroleum and Chemical Industry Association
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the method for determining the content of chelating agents in detergents. The content of chelating agents shall not exceed 2% (m/m). This method is applicable to the determination of the content of ethylenediaminetetraacetic acid (EDTA) and its salts in detergents. GB/T 15916-1995 Determination of the content of surfactant chelating agents Titration method GB/T15916-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 2424.17-1995 Environmental testing guidelines for electrical and electronic products - Soldering tests
- GB 3300-1991 Test method for deformation of daily-use ceramics
- QB/T 1658.1-2002 General technical requirements for reed wind instruments
- HG/T 21609-1996 Polytetrafluoroethylene-rubber composite gaskets for pipe flanges
- HG/T 2962-1999 Industrial manganese sulfate
- GB/T 39315.1-2020 General resource of military and civilian—Data model—Part 1:Supplies—Petroleum products
- GB/T 15970.7-2000 Corrosion of metals and alloys Stress corrosion testing Part 7: Slow strain rate test
- GB/T 10113-1988 Definition of common terms used in classification and coding
- JB/T 5439-1991 Ultrasonic flaw detection of ductile iron parts for compressors
- HG/T 2659-1995 Fast Yellow G
- JB/T 8830-2001 Calculation method for load-bearing capacity of high-speed involute cylindrical gears and similar gears
- QB/T 2701-2005 Table tennis net
- GB/T 14359-1993 Marine emergency piston air compressor
- GB 50226-1995 Code for the design of railway passenger station buildings
- SJ 1.7-1987 Requirements for complete documents and related materials when standards drafts submitted for approval
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com