Codes for cadres positions classes
time:
2024-07-15 19:06:07
- GB 12407-1990
- Abolished
Standard ID:
GB 12407-1990
Standard Name:
Codes for cadres positions classes
Chinese Name:
干部职务级别代码
Standard category:
National Standard (GB)
-
Date of Release:
1990-07-05 -
Date of Implementation:
1991-05-01 -
Date of Expiration:
2009-01-01
Standard ICS number:
Information technology, office machinery and equipment >> 35.040 Character sets and information codingChina Standard Classification Number:
Comprehensive>>Basic Standards>>A24 Classification Code
alternative situation:
Replaced by GB/T 12407-2008
Release date:
1990-07-05Review date:
2004-10-14Drafter:
Zhang Ai, Li ZhaofenDrafting Organization:
China Institute of Standardization and Information Classification and CodingFocal point Organization:
China National Institute of StandardizationProposing Organization:
National Computer and Information Processing Standardization Technical Committee Data Element Representation Technical CommitteePublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
General Administration of Quality Supervision, Inspection and Quarantine
Skip to download
Summary:
This standard specifies the codes for cadre positions and ranks. This standard applies to information processing and information exchange. GB 12407-1990 Codes for cadre positions and ranks GB12407-1990 Standard download and decompression password: www.bzxz.net
This standard specifies the codes for cadre positions and ranks. This standard applies to information processing and information exchange.
This standard specifies the codes for cadre positions and ranks. This standard applies to information processing and information exchange.
Some standard content:
National Standard of the People's Republic of China
Codes for cadres positions classesbzxZ.net
Codes for cadres positions classes Subject content and scope of application
This standard specifies the codes for cadres positions classes. This standard is applicable to information processing and information exchange. Coding method
This standard adopts two-digit sequential coding. 3 Code table
Additional notes:
GB 12407-—90
Cadre position level
President, Vice President, Premier level
Vice Premier, State Councilor level
Ministry, Provincial level
Deputy Ministry, Deputy Provincial level
Department, Bureau, Prefecture, Department level
Deputy Department, Deputy Bureau, Deputy Prefecture, Deputy Department level
County, Division level
Deputy County, Deputy Division level
Section level
Deputy Section level
Section member level
Clerk level
This standard was proposed by the Data Element Representation Subcommittee of the National Technical Committee for Computer and Information Processing Standardization. This standard was drafted by the China Institute of Standardization and Information Classification and Coding. The main drafters of this standard are Zhang Ai and Li Zhaofen. Approved by the State Bureau of Technical Supervision on July 5, 1990, 81
Implementation on May 1, 1991
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Codes for cadres positions classesbzxZ.net
Codes for cadres positions classes Subject content and scope of application
This standard specifies the codes for cadres positions classes. This standard is applicable to information processing and information exchange. Coding method
This standard adopts two-digit sequential coding. 3 Code table
Additional notes:
GB 12407-—90
Cadre position level
President, Vice President, Premier level
Vice Premier, State Councilor level
Ministry, Provincial level
Deputy Ministry, Deputy Provincial level
Department, Bureau, Prefecture, Department level
Deputy Department, Deputy Bureau, Deputy Prefecture, Deputy Department level
County, Division level
Deputy County, Deputy Division level
Section level
Deputy Section level
Section member level
Clerk level
This standard was proposed by the Data Element Representation Subcommittee of the National Technical Committee for Computer and Information Processing Standardization. This standard was drafted by the China Institute of Standardization and Information Classification and Coding. The main drafters of this standard are Zhang Ai and Li Zhaofen. Approved by the State Bureau of Technical Supervision on July 5, 1990, 81
Implementation on May 1, 1991
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 17980.91-2004 Pesticide-Guidelines for the field efficacy trials(II)-Part 91:Fungicides against brown leaf spot of tobacco
- GB/T 14528-1993 Determination of repair performance of ship coatings
- GB/T 18839.1-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles
- HG/T 20537.4-1992 Technical requirements for large diameter austenitic stainless steel welded steel pipes for chemical plants
- GB/T 16108-1995 Spectrophotometric determination of zirconium and its compounds in workplace air using xylenol orange
- QB/T 2626.1-2004 General technical requirements for needle plates of industrial sewing machines Part 1: Needle plates for lockstitch sewing machines
- GB/T 14499-1993 Geophysical exploration technical symbols
- GB/T 3452.3-1988 液压气动用O形橡胶密封圈 沟槽尺寸和设计计算
- GB/T 4622.1-2003 Classification of spiral wound gaskets
- HG 20225-1995 Specification for Construction and Acceptance of Chemical Metal Pipeline Engineering
- GB/T 4199-2003 Definition of rolling bearing tolerances
- JB/T 7702-1995 Salt water droplet corrosion test for metal and non-organic coating on metal substrate (SD test)
- GB/T 8762.2-1988 Determination of calcium oxide content in fluorescent grade yttrium oxide and europium oxide - Nitrous oxide-acetylene flame atomic absorption spectrophotometry
- YB/T 007-2003 Aluminium-carbon refractory products for continuous casting
- JB/T 8600.1-1997 Precision inspection of table tapping machines
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com