GB/T 15755-1995 Calculation and selection of tapered interference fit
time:
2024-08-08 15:23:49
- GB/T 15755-1995
- in force
Standard ID:
GB/T 15755-1995
Standard Name:
Calculation and selection of tapered interference fit
Chinese Name:
圆锥过盈配合的计算和选用
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-01 -
Date of Implementation:
1996-07-01
Standard ICS number:
21.010China Standard Classification Number:
Machinery>>General Machinery>>J04 Basic Standards and General Methods
Release date:
1995-11-23Review date:
2004-10-14Drafting Organization:
Machinery Standardization Research Institute of the Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Standardization of Product Dimensions and Geometry SpecificationsPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Standardization Administration
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the type, calculation and selection of cone interference fit. This standard applies to the calculation and selection of interference fit of smooth cone surfaces assembled and disassembled by oil pressure within the elastic range. GB/T 15755-1995 Calculation and selection of cone interference fit GB/T15755-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- SY/T 10018-1998 Technical Guide for Marine Positioning Data Processing
- GB 3107.4-1991 Marine handheld white light flame signal
- QB/T 1538-1992 Rules for compiling product codes for timekeeping instruments - Code representation method for watches, clocks and timers
- JB/T 8810.3-1998 Multi-point lubrication pump 31.5MPa
- GB 14912-1994 Specifications for machine-assisted cartography of large-scale topographic maps
- GB 15193.5-2003 Bone marrow cell micronucleus test
- GB/T 15566.3-2007 Guidance system for public information—Setting principles and requirements—Part 3:Railway passenger station
- QB/T 1577-1992 Industrial sewing machine embroidery machine heads
- YC/T 37.1-2002 Determination of physical properties of filter rods Part 1: Length electro-optical method
- JB/T 51242-1999 Agricultural sewage submersible pump product quality classification
- JB/T 9163.10-1999 Dimensions of mandrels for cap-type shaving and honing
- GB/T 18316-2001 Specificatlons for inspection,acceptance and quality assessment of digital surveying and mapping products
- GB/T 19015-1996 Quality management-Guidelines for quality plans
- GB/T 15364-1994 Test method for parking performance of motorcycles and mopeds
- GB/T 11640-2001 Aluminum alloy seamless gas cylinders
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]