JB/T 9955.1-1999 Radial forging machine types and basic parameters

JB/T 9955.1-1999 This standard is a revision of ZB J62 003-87 "Radial forging machine types and basic parameters". This standard is part of the JB/T 9955 "Radial forging machine" series of standards. This series of standards includes the following three parts: JB/T 9955.1-1999 Radial forging machine types and basic parameters JB/T 9955.2-1999 Radial forging machine accuracy JB/T 9955.3-1999 Radial forging machine technical conditions This standard specifies the types and basic parameters of radial forging machines. This standard is applicable to radial forging machines for hot forging of ferrous or non-ferrous metals with round and square sections. This standard was first issued in April 1987. JB/T 9955.1-1999 Radial forging machine types and basic parameters JB/T9955.1-1999 Standard download decompression password: www.bzxz.net

[CS25.120,10
Machinery Industry Standard of the People's Republic of China
JBT9955.11999
Radial forging machine
1999-05-14 Issued
Type and basic parameters
2000-01-01 Implementation
State Machinery Industry Bureau
1B/T9955.1-1999
This standard is a revision of the type and basic parameters of radial forging machine ZB6200387. Car logo push and Z day J62003-8? The technical contents are basically the same, and only the relevant regulations are revised. This standard has been implemented since January 2000. It replaces 2BJ62003-87 from the date of implementation. This standard is proposed and drafted by the National Technical Committee for Standardization of Presses. The responsible drafting unit of this standard is: Jiangji Press Machine Tool. This standard was first issued in April 198. Scope
Machinery Industry Standards of the People's Republic of China
Radial Forging Machine bzxz.net
Types and Basic Parameters
This standard specifies the types and basic parameters of radial forging machines. J/9955.1—1999
2B362(03—87
This standard is applicable to radial forging machines (hereinafter referred to as radial forging machines) for round and square sections or non-ferrous metal forging. The types of radial forging machines are divided into vertical and horizontal types. 3 Basic static sensitivity
3.1 The main number of radial forging machines is the maximum diameter of the workpiece. 3.2 The basic integer of the vertical radial forging machine shall comply with the provisions of Table 1. Table 1 Number of vertical radial forging machines
Forgeable Maximum diameter
Maximum length
Maximum impact force of each slow head
Number of head impacts per minute
Diameter adjustment
Times/min
1When making hollow replacement parts, the length shall be specified by the order form to the manufacturer. 0
4(or 3)
2The maximum size of the pipe is called the maximum size of the pipe: if the slow-made alloy steel and other high-strength metal materials, the maximum size of the door silver should be reduced by 15% compared with the value listed in the table
The basic parameters of the horizontal forging machine shall comply with the requirements of Table 2. 3.3 Basic parameters of horizontal forging machine Maximum size of workpiece Length of workpiece Number of hammers Maximum striking force of each hammer Number of hammers per minute Diameter adjustment range Approved by the State Machinery Industry Bureau on May 14, 1994 4 (or 3): 360 Implementation on January 1, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.