INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 3757.2-1983 Compression-type butt-end right angle connector

time: 2024-08-10 19:57:38
  • GB/T 3757.2-1983
  • Abolished

Basic Information

  • Standard ID:

    GB/T 3757.2-1983

  • Standard Name:

    Compression-type butt-end right angle connector

  • Chinese Name:

    卡套式端对接直角接头体

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1983-06-17

  • Date of Implementation:

    1984-04-01

  • Date of Expiration:

    2008-11-01

standard classification number

  • Standard ICS number:

    21.060.60;

  • China Standard Classification Number:

    Machinery>>General Parts>>J15 Pipe Accessories

associated standards

Publication information

  • publishing house:

    China Standards Press

  • Publication date:

    1984-04-01

Other Information

  • Release date:

    1983-06-17

  • Review date:

    2004-10-14

  • Drafting Organization:

    Standardization Institute of the Ministry of Machinery Industry

  • Focal point Organization:

    National Technical Committee for Standardization of Pipe Accessories

  • Publishing Department:

    China Machinery Industry Federation

  • Competent Authority:

    China Machinery Industry Federation
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

GB/T 3757.2-1983 Compression-type end-to-end right angle connector GB/T3757.2-1983 standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

Marking example,
National Standard of the People's Republic of China
Straightthread elbowfor
butt joints-Body
Nominal pressure J grade, pipe outer diameter D, 14Ⅱm ferrule end butt right angle joint body joint body J14
GB3757.2-83bZxz.net
National Bureau of Standards 1983-06-17 issued
UDC621.643.4
GB 3757.2-83
19B4-04-01 implementation
Nominal pressure
Outer diameter of pipe
M14×1,5
M27×2
M33×2
M42×2
(M48×2)
:M50×2
M27×2
Note: ①The dimensions in brackets in column d are limited to the old products. GB 3757.2-88
The weight is calculated value, and the specific gravity is 7.85kg/dm%. The technical conditions are in accordance with the provisions of GB3765-83. d
M10×1
M12× 1.25
M16× 1.5
M20 × 1.5
M24 ×1.5
M30×2
M33×2
M36×2
M42×2
M45×2
M48×2
M52×2
M16×1,5
M22 ×1.5
M30×2
M33×2
M36 ×2
M39×2
GB 3757.2--83
（kg/100 pieces
GB 3757.2-63
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry. This standard is drafted by the Standardization Institute of the Ministry of Machinery Industry, and is drafted by Shenyang Heavy Machinery, Chongqing Heavy Automobile Research Institute, Dalian Modular Machine Tool Research Institute, Zhejiang Haiyi County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the 78th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Mutai. From the date of implementation of this standard, the original departmental standard B18-7 "Cut-type end-butted right-angle connector" will be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com