JB/T 8156-1999 Definitions and terms for commutator and collector ring

This standard specifies the cylindrical commutator and collector ring for motors in a graphical form, as well as the definitions and terms related thereto. JB/T 8156-1999 Definitions and terms for commutator and collector ring JB/T8156-1999 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T8156
1999-08-06
2000-01-01小
哇鱻极懂
JB/T8156
This standard is a revision of JIB/T815695 "Definition and Terminology of Commutator and Collector Ring". The content of the standard is consistent with the provisions of the commutator\collector ring part in the international standard IEC60276 (1968, 1st edition) "Definition and Terminology of Brush, Grip, Commutator and Collector Ring".
Compared with B/T8156-95, this standard has modified the writing format of the standard, and there is no difference in the technical content. This standard replaces JB8156-95 from the date of implementation. This standard is proposed and approved by the National Technical Committee for Standardization of Rotating Motors. This standard was drafted by: Shanghai Electric Science Research Institute: This standard was drafted by: Guo Zhong.
JB/T81561999
JB/T815695
This standard specifies in graphic form the circular commutators and collector rings for motors and the definitions and terms related thereto.
coinmutators and collector rings2.1 Cylindrical commutator
collector ring
collector ring
"belly grooved collector ring"2.4
recessed orunder cutmicaor insulation2.5 Chamfered commutator segments
chamfered bars
5 flush mica or insulation
1999-08-06 tumor
2000-01-01 small cable
2.7 won down to the micas
2.8 music
tlalspot
high bar
lowbar
2.11 raised mica (or insulation)
higl or proud mica or insulation, rough commutator
tough comminntator
commutator markig
3.f membrane
3.2 line marks
lining, streaking
JB/T8156
J I.wi ii
3.3 streaking
bauding
3.4 ​​streaking
ribbing
3.5 threading
JB/T8156
3.6 grooving
grooving
3,7 rising
ridging
3.8 shaking
copper dragging
3.9 burning
buirming
3.10 copper
copper picking
JB/T8156
3.11 Marks
marking
a) Regular marks of commutator
regular bar marking
b) Irregular marks of commutator
ifregular bar marking
miscellaneous
4.1 Positive brush
aiodic brush
4.2 Negative brush
cathodic brush
circumferential stagger
axial stagger
axiat stagger
JB/T8156
5 Brush contact voltage drop
brush contactdrop
4.6 Total voltage drop of single brush
total single brush drop
brush body voltage drop
internal brush drop
connection drop
brush voltage drop
flexibledrop
total brush drop per brush pair6
JB/T8156
1 Commutator/brush potential
4.12 Brush potential distribution
brush potent ial cu've
4.13 Mumbering of collector rings Mumbering of bnush tracks
JB/T8156www.bzxz.net
lai880b1230
19XXXXling
德头鹿蛇
100044
万段X/X
张诀XXX,XXX
19XX集XX舱
X为沙鱼
德pxXX.XX翼
鱻极藕
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.