QB/T 2212.17-1996 Construction tools (brick and mortar) Single-edged masonry knives

This standard specifies the product classification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of single-edged masonry knives. This standard applies to the single-edged masonry knives No. 308 specified in QB/T 2212.1 "Terms of Construction Tools (Masonry)". QB/T 2212.17-1996 Construction Tools (Masonry) Single-edged Masonry Knives QB/T2212.17-1996 Standard download decompression password: www.bzxz.net

QB/T 2212.17--1996
This standard is revised on the basis of the former professional standards of the Ministry of Light Industry ZBJ47001--1985 "Terms of Construction (Masonry) Tools", ZBJ47002-1985 "General Technical Conditions for Construction (Masonry) Tools", and ZBJ47003--1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools", and converted into light industry standards. In terms of the overall structure of the standard, the terminology, general technical conditions and product standards of construction tools are retained, and the original ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools" is cancelled, and some of its relevant provisions are merged into the general technical conditions. The product standards are retained according to the numbers in the terminology, and a "diamond shovel" product standard is added. This standard changes the word "bricks and tiles" in the brackets of the original name to "bricks and tiles", and puts it behind the standard name "construction tools", so that the hand tools used in construction work are more standardized, and a clear limitation is made in the scope of application. This standard is a supporting standard, and the terms and general technical conditions are based on it. The technical content in the original standard that has been proven to be suitable for my country's situation in practice is retained. The main dimensions in the product standard have been optimized, several specifications have been added, and the limit deviation has been indicated. This standard has modified and improved some quality indicators.
From the date of implementation of this standard, ZBJ47001~47003-1985 will be abolished at the same time. This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Tool Hardware Standardization Center. The drafting units of this standard are: Shanghai Tool Industry Research Institute, Shijiazhuang Industrial and Agricultural Machinery Factory, Dalian House Equipment Tool General Factory, Shanghai Fengxian Tool Lan Guang, etc.
The main drafters of this standard are: Cheng Yongfeng, Zuo Zhenjiang, Tian Limin, Qin Delin, Wang Chende. This standard is entrusted to the National Tool and Hardware Standardization Center for interpretation. 632
Light Industry Standard of the People's Republic of China
Construction Tools (Brick and Brick)
Single-edged Bricklaying Knife
QB/T 2212.17 1996
This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of single-edged bricklaying knives. This standard applies to No. 308 single-edged bricklaying knives specified in QB/T2212.1 "Terms of Construction Tools (Brick and Brick)". 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. QB/T2212.1—1996 Terminology of Construction Tools (Brickwork) QB/T2212.2-1996 General Technical Conditions of Construction Tools (Brickwork) 3 Product Classification
3.1 Type
The type of single-edge bricklaying knife is shown in Figure 1.
3.2 Main Dimensions
The main dimensions of single-edge bricklaying knife shall be in accordance with the provisions of Table 1. Approved by China Light Industry Association on March 22, 1996
TKAONKAca-
Implementation on December 1, 1996
Blade length of blade
Limit deviation
QB/T2212.17--1996
Table 1 Main Dimensions
Front width of blade
Note: Special types and other dimensions may not be restricted by this table. 4 Technical requirements
Limit deviationwww.bzxz.net
The technical requirements for single-edged masonry cutters shall comply with the provisions of Chapter 4 of QB/T2212.2-1996. 5 Test methods
5.1 Dimension inspection
Measured with universal measuring tools.
5.2 Inspection of other items
Carry out in accordance with the provisions of Chapter 5 of QB/T2212.2-1996. 6 Inspection rules
Comply with the provisions of Chapter 6 of QB/T2212.2-1996. 7 Packaging, marking, transportation and storage
Comply with the provisions of Chapter 7 of QB/T2212.2-1996. 634
Limit deviation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.