JB/T 2902-1993 Technical requirements for general reciprocating piston high pressure oxygen compressors
time:
2024-08-04 06:01:27
- JB/T 2902-1993
- in force
Standard ID:
JB/T 2902-1993
Standard Name:
Technical requirements for general reciprocating piston high pressure oxygen compressors
Chinese Name:
一般往复活塞高压氧气压缩机 技术条件
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1993-07-13 -
Date of Implementation:
1994-07-01
China Standard Classification Number:
Machinery>>General Machinery and Equipment>>J76 Gas Separation and Liquefaction Equipment
alternative situation:
JB 2902-81
Focal point Organization:
Hangzhou Oxygen Generator Research InstitutePublishing Department:
Hangzhou Oxygen Generator Research Institute
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the specified working conditions, technical performance, test methods and inspection rules, as well as marking, packaging and storage of general reciprocating piston high-pressure oxygen compressors. This standard is applicable to oxygen compressors for filling bottles with suction pressure of 0.0005~0.0050MPa, nominal exhaust pressure of 14.7~16.5MPa, nominal volume flow rate not exceeding 180m3/h, and cylinder lubricated with distilled water. JB/T 2902-1993 Technical conditions for general reciprocating piston high-pressure oxygen compressors JB/T2902-1993 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 16901.3-2003 Rules for the presentation of graphical symbols--Graphical symbols for use in the technical documentation of products--Part 3:Classification of connect notes,networks and their encoding
- GB/T 3047.2-1992 Basic dimension series for panels, racks and cabinets with a height of 44.45 mm
- JB/T 3703.2-1995 Test and measurement procedures for small general purpose electromagnetic relays
- GB 4596-1984 E-type core for three-phase transformers for electronic equipment
- GB 3618-1989 Aluminum and aluminum alloy patterned plates
- GB/T 5170.15-1985 Basic parameter verification method for environmental test equipment for electrical and electronic products - Hydraulic vibration table for vibration (sinusoidal) test
- GB/T 19017-2020 Quality management—Guidelines for configuration management
- GB/T 14716-1993 General technical requirements for program-controlled analogue automatic telephone exchanges
- SJ/Z 3206.2-1989 Laser source and its performance requirements for determination of emision spectrum
- GB 4706.28-1999 Particular requirements for safety of household and similar electrical appliances - Range hoods
- JB/T 6636-1993 Thin-wall sealed bearings for robots
- JB/T 5904-1992 Basic series parameters of low pressure turbine expander
- GB/T 15045-1994 Fatty alkyl dimethyl tertiary amine
- JG/T 113-1999 Concrete hollow slab extrusion molding machine
- JB/T 5820-1991 Technical requirements for plastic extrusion equipment for wires and cables
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]