JB/T 5317.1-1991 Types and basic parameters of electric chain hoist

JB/T 5317.1-1991 Types and basic parameters of electric chain hoist JB/T5317.1-1991 Standard download and decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
Electric Chain Hoist
Types and Basic Parameters
Subject Content and Scope of Application
This standard specifies various types of electric chain hoists and basic parameters. JB/T 5317. 1--91
This standard is mainly applicable to general-purpose electric chain hoists (hereinafter referred to as chain hoists) with a lifting capacity of 0.1~~10t and a lifting mechanism working level of M1M5. Special-purpose chain hoists can also be used as a reference. The working level of the chain hoist's lifting mechanism is based on the relevant regulations of GB3811, as shown in Table 1. Table 1
Load status
1.1-light
.2-medium
1.3-heavy
1.4-extra heavy
2| |tt||Quoted standards
nominal load spectrum coefficient
GB 783
Maximum lifting capacity series of lifting machinery
GB3811
3 types||tt| |Crane design specifications
Organization
Utilization level
T2||tt ||M1
Depending on whether the chain hoist has an operating mechanism and the installation method, it can be divided into the following types. 3.1 Suspended
has no operating mechanism and is used to hang on a fixed frame. According to the different structure forms of its suspension parts, it is divided into the following categories: Type: a.
Ring-suspended chain hoist, as shown in Figure 1, its code is HHXH\; Hook-suspended chain hoist, as shown in Figure 2, its The code name is HHXG\. Note: 1) Explanation of code characterizing letters:
“HH\ means chain hoist;
\X\ means suspension
“H\ means lifting ring;
”C \ means hook.
3.2 Monorail trolley type
A chain hoist with a running mechanism and the lower flange of the monorail as the running track. According to the overall layout of the chain hoist and the chain transmission structure, it is divided into two categories. It is the standard building height and low building height. The Ministry of Mechanical and Electronics Industry of the People's Republic of China approved 144
1992-07-01 to implement
3.2.1 standard building height monorail trolley JB. /T 5317.1-91 | Linear rails or curved rails can be divided into the following types according to the driving mode of the operating mechanism. 3.2.1.1 Standard building height, hand-operated trolley chain hoist, as shown in Figure 3, code-named HHBS Figure 3. bzxZ.net
JB/T5317.1—91
3.2.1.2 Standard building height, sprocket trolley type chain hoist, as shown in Figure 4, code-named HHBE\Figure 4
3.2.1.3 Standard building height, electric trolley type chain hoist, as shown in Figure 5, code-named HHBD1. Figure 5
3.2.2 Low building height monorail trolley type||tt| |The chain hoist and the counterweight device are arranged on both sides of the running trolley respectively. The running track of the trolley is a single track. The form of the running track can be a straight track or a curved track. According to the driving mode of the running mechanism, it can be divided into the following Several types. 146
JB/T 5317. 1-- 91
3.2.2.1 Low building height, hand-operated trolley chain hoist, as shown in Figure 6, codenamed HHDS\. Tian
Figure 6
3.2.2.2 Low building height, sprocket trolley type chain hoist, as shown in Figure 7, code-named HHDL1④
Figure 7
JB/T 5317. 1—91
3.2.2.3 Low building height, electric trolley-type chain hoist, as shown in Figure 8, code-named HHDD1" Figure 8
Note :1) Explanation of code character letters:
“B\ means standard building height;
”D” means low building height;
“S\ means hand-pulled trolley; ||tt ||“D)\The last digit D represents the electric trolley.
3.2.3 The standard building height monorail double trolley chain hoist lifting mechanism and lower hook device are arranged on the crossbeam of the double trolley. The running track is a single track, and the form of the running track can be a straight track or a curved track. According to the driving mode of the running mechanism, it can be divided into the following types: 3.2.3.1 Standard building height, hand-operated double trolley chain hoist. , as shown in Figure 9, code-named HHBSS!. Figure 9
JB/T 5317.1--91
3.2.3.2 Standard building height, sprocket double trolley type chain hoist, as shown in Figure 10, code-named HHBLS !By
Figure 10
3.2.3.3 standard building height, electric double trolley type chain reed, as shown in Figure 11, code-named HHBDS!) Figure 11|| tt||Note: 1) The code indicates the letter description, "S\ (the last digit) means double trolley. 4
Basic number of testicles
Lifting weight
The rated lifting capacity of the chain hoist is determined according to GB783, as specified in Table 2. Table 2
4.2 Lifting height
The lifting height should preferably adopt the value specified in Table 3: 2.5
2| |tt||Table 3
3 lifting speed
JB/T5317.1 —91
The lifting speed should preferably adopt the value specified in Table 4. Table 4
4.4 Operating speed
The first priority operating speed is the value specified in Table 5. Table 5
Single
Double||tt| |4.4.2
The second preferred operating speed is as specified in Table 6.
Single
Double
Additional notes:
This standard is proposed and managed by the Beijing Hoisting and Transport Machinery Research Institute of the Ministry of Mechanical and Electronic Industry . This standard is drafted by Beijing Hoisting and Transport Machinery Research Institute. The main drafter of this standard is Liang Jianai.
1.25||h||10||h||28||h||28/7||h||m/min||h||1.6||h||12.5||h||m/min| |ht||25||ht||25/6.3||ht||m/min||ht||
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.