JB/T 3292-1999 Dovetail tenoning machine accuracy

JB/T 3292-1999 This standard is a revision of JB 3292-83 "Precision of dovetail tenoning machines". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged. This standard specifies the geometric accuracy and working accuracy requirements and inspection methods of dovetail tenoning machines. This standard is applicable to single-head dovetail tenoning machines. This standard was first issued on June 20, 1983. JB/T 3292-1999 Precision of dovetail tenoning machines JB/T3292-1999 Standard download decompression password: www.bzxz.net

ICS79.120.10
Machinery Industry Standard of the People's Republic of China
JB/T3292—1999
Accuracy of Dovetail Opening Machine
Published on May 14, 1999
National Bureau of Machinery Industry
Implemented on January 1, 2000
JB/T3292—1999
This standard is a revision of JB3292-83 "Accuracy of Dovetail Opening Machine". During the revision, only editorial changes were made according to relevant regulations, and the technical content has not changed
This standard replaces JB3292-83 from the date of implementation. This standard was proposed by the National Technical Committee for Standardization of Woodworking Machine Tools and Cutting Tools. This standard is under the jurisdiction of Fuzhou Woodworking Machine Tool Research Institute. The responsible drafting unit of this standard: Mudanjiang Woodworking Machinery Factory. The main drafters of this standard: Dong Yanwen and Luan Jingkun. This standard was first issued on June 20, 1984. 1
Mechanical Industry Standard of the People's Republic of China
Precision of Dovetail Opening Machine
This standard specifies the geometric accuracy and working accuracy requirements and inspection methods of dovetail opening machines. This standard applies to single-head dovetail opening machines. Referenced Standards
JB/T3292-1999
Replaces JB3292-83
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. JB/T4171—1999 General Rules for Precision Inspection of Woodworking Machine Tools 3 Requirements
3.1 When using this standard, the provisions of JB/T4171 should be referred to. 3.2 Before the machine tool is inspected, adjust the installation level of the machine tool according to 3.1 of JB/T4171-1999, place the level in the middle of the machine tool workbench, and the vertical and horizontal readings of the level shall not exceed 0.1/1000. 3.3 When the actual measured length is different from the length specified in this standard, the tolerance shall comply with the provisions of 2.2.1.1 of JB/T4171-1999. Converted according to the measurable length, the minimum conversion value is 0.01mm. 3.4 The order of various precision inspections listed in this standard does not represent the actual inspection order. In order to facilitate the disassembly and inspection of the machine tool, the inspection can be carried out in any order.
4 Geometric precision inspection
Geometric precision inspection shall be in accordance with the provisions of Table 1.
Test items approved by the State Machinery Industry Bureau on May 14, 1999
Straightness of the table surface of the workbench and the sample
slot workbench
Table 1 (continued)
0.10 when A≤630
0.15 when A630
Test method reference
JB/T4171— 1999
Related provisions
4.2.1.2.2.1
2000-01-01Implementation
JB/T3292—1999
Inspection items
Parallelism of the main axis along the longitudinal motion to the surface of the sample head workbench and the surface of the sample groove workbench
|tt||When the spindle moves in the horizontal direction,
the flatness of the sample slot working table
the verticality of the sample head working table to the barnyard
tt||slot working table
the circular runout of the shaft diameter at the front end of the spindle
is 0.20 when A≤630
and 0.25 when A>630||t t||Indicator
Indicator
Indicator
For the inspection method, refer to the relevant provisions of
JB/T4171—1999
|44.2.22.2.1
44.2.22.2.1
4.7.1.2.2.2
Working accuracy
The working accuracy shall be in accordance with the provisions of Table 2.
JB/T3292—1999
Table 1 (end)
Inspection items
Axial movement of the main shaft
Inspection items
Pitch of barnyard
Note: The test piece can be any variety of wood with a moisture content not exceeding 15%. Tolerance
When 1, it is 010
When 0.25
Indicator
Inspection method refers to
The relevant provisions of JB/T4171—1999
Inspection method
After planing the base surface of the test piece, open the sample and add
Then measure the arbitrary
pitching distance t.
The maximum error value is
the pitch error
Mechanical industry standard
Dovetail prototype machine accuracy
JB/T3292—1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 sheet 1/2 Number of words 8000
Format 880×1230
First printing in August 1999Www.bzxZ.net
First edition in August 1999
Print count 1-500
Price 500 yuan
99-357
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.