GB 16487.9-1996 Imported Waste Environmental Protection Control Standard Waste Wires and Cables
time:
1996-07-29 15:00:00
- GB 16487.9-1996
- Abolished
Standard ID:
GB 16487.9-1996
Standard Name:
Imported Waste Environmental Protection Control Standard Waste Wires and Cables
Chinese Name:
进口废物环境保护控制标准 废电线电缆
Standard category:
National Standard (GB)
-
Date of Release:
1996-07-29 -
Date of Implementation:
1996-08-01 -
Date of Expiration:
2006-02-01
Standard ICS number:
Environmental Protection, Health and Safety>>13.030 WasteChina Standard Classification Number:
Environmental Protection>>Pollutant Emission Standards>>Z70 Toxic Solid Waste Control Standard
alternative situation:
Replaced by GB 16487.9-2005
Review date:
2004-10-14Drafting Organization:
National Environmental Protection Agency Pollution Control DivisionFocal point Organization:
State Environmental Protection AdministrationPublishing Department:
National Environmental Protection AgencyCompetent Authority:
State Environmental Protection Administration
Skip to download
Summary:
GB 16487.9-1996 Standard for Environmental Protection Control of Imported Waste Waste Wires and Cables GB16487.9-1996 Standard download and decompression password: www.bzxz.net
Some standard content:
GB16487.9—1996
Foreword
This standard is to implement the "Interim Regulations on Environmental Protection Management of Waste Imports" promulgated by the state and to control the harmful waste contained in imported waste wires and cables that can be used as raw materials. environmental pollution caused. This standard has been on trial basis since August 1, 1996. This standard was proposed by the Pollution Control Department of the State Environmental Protection Administration. The National Environmental Protection Administration is responsible for interpreting this standard. 1Scope
National Standard of the People's Republic of China
Environmental protection control standard for imported scrap
Waste wire and cable
(Trial)bZxz.net
Environmental protection control standard for imported scrap material | | tt | This standard applies to the import of waste wires and cables. 2 Reference Standards
SN0580-1996 Inspection Regulations for Imported Waste Wires and Cables (Trial) GB8703-88 Radiation Protection Regulations
SN0570-·1996 Inspection Regulations for Radioactive Contamination of Imported Scrap Metal (Trial) GB5085.3-1996 Hazardous Waste Identification Standard Leaching Toxicity Identification GB13015-91 Waste Pollution Control Standard Containing PCBs GB/T15555.1~15555.12-1995 Solid Waste Leaching Toxicity Determination Method 3 Definition
This standard adopts the following definitions: ||tt ||Entrained waste
refers to the waste materials that are mixed with imported waste wires and cables during the collection, packaging and transportation processes and cannot be directly used as raw materials (excluding packaging materials for imported waste wires and cables and those that need to be used during transportation) of other substances). 4 Control standards and requirements
4.1 It is prohibited to mix imported waste wires and cables with entrained waste whose concentration of harmful substances in the leachate exceeds the identification standard value in GB5085.3-1996.
4.2 It is prohibited to mix waste with polyfluorinated biphenyl content exceeding the control standard value in GB13015-91 in imported waste wires and cables. 4.3 Imported waste wires and cables are prohibited from being mixed with entrained waste whose leachate pH value is equal to or greater than 12.5 and equal to or less than 2. 4.4 It is prohibited to carry radioactive waste in imported waste wires and cables. 4.5 The radioactive material pollution control indicators of imported waste wires and cables should comply with the requirements of GB8703--88 regarding the control level of radioactive material pollution on the surface of objects.
4.6 The total weight of the following wastes contained in imported waste wires and cables shall not exceed one ten thousandth of the weight of imported waste wires and cables.--: Approved by the State Environmental Protection Administration on 1996-07-29 and implemented on 1996-08-01||tt ||a)
Explosive waste;
b) Asbestos waste;
Chu burning disposal residue;
GB16487.9— 1996 | |e)
Various liquid waste;
Clinical waste;
Kitchen waste, bathroom waste;||tt| | Sealed containers, etc.
4.7 In addition to the wastes listed in the above items, other entrained wastes (such as waste paper, waste wood blocks, slag, etc.) The total weight of soil, waste fiber ropes, waste glass, cement blocks and stripped rust, etc.) shall not exceed 2% of the weight of imported waste wires and cables
4.8 Imported waste wires and cables shall not contain oil-sealed cables and optical cables. 5 Inspection
5.1 The inspections in Articles 4.1 and 4.3 of this standard shall be carried out in accordance with the provisions of GB/T15555.1~15555.12-1995. 5.2 The inspection in Article 4.2 of this standard shall be carried out in accordance with the provisions of GB13015-91. 5.3 The inspections in Articles 4.4 and 4.5 of this standard shall be carried out in accordance with the provisions of SN0570--1996. 5.4 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of SN0580-1996.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Foreword
This standard is to implement the "Interim Regulations on Environmental Protection Management of Waste Imports" promulgated by the state and to control the harmful waste contained in imported waste wires and cables that can be used as raw materials. environmental pollution caused. This standard has been on trial basis since August 1, 1996. This standard was proposed by the Pollution Control Department of the State Environmental Protection Administration. The National Environmental Protection Administration is responsible for interpreting this standard. 1Scope
National Standard of the People's Republic of China
Environmental protection control standard for imported scrap
Waste wire and cable
(Trial)bZxz.net
Environmental protection control standard for imported scrap material | | tt | This standard applies to the import of waste wires and cables. 2 Reference Standards
SN0580-1996 Inspection Regulations for Imported Waste Wires and Cables (Trial) GB8703-88 Radiation Protection Regulations
SN0570-·1996 Inspection Regulations for Radioactive Contamination of Imported Scrap Metal (Trial) GB5085.3-1996 Hazardous Waste Identification Standard Leaching Toxicity Identification GB13015-91 Waste Pollution Control Standard Containing PCBs GB/T15555.1~15555.12-1995 Solid Waste Leaching Toxicity Determination Method 3 Definition
This standard adopts the following definitions: ||tt ||Entrained waste
refers to the waste materials that are mixed with imported waste wires and cables during the collection, packaging and transportation processes and cannot be directly used as raw materials (excluding packaging materials for imported waste wires and cables and those that need to be used during transportation) of other substances). 4 Control standards and requirements
4.1 It is prohibited to mix imported waste wires and cables with entrained waste whose concentration of harmful substances in the leachate exceeds the identification standard value in GB5085.3-1996.
4.2 It is prohibited to mix waste with polyfluorinated biphenyl content exceeding the control standard value in GB13015-91 in imported waste wires and cables. 4.3 Imported waste wires and cables are prohibited from being mixed with entrained waste whose leachate pH value is equal to or greater than 12.5 and equal to or less than 2. 4.4 It is prohibited to carry radioactive waste in imported waste wires and cables. 4.5 The radioactive material pollution control indicators of imported waste wires and cables should comply with the requirements of GB8703--88 regarding the control level of radioactive material pollution on the surface of objects.
4.6 The total weight of the following wastes contained in imported waste wires and cables shall not exceed one ten thousandth of the weight of imported waste wires and cables.--: Approved by the State Environmental Protection Administration on 1996-07-29 and implemented on 1996-08-01||tt ||a)
Explosive waste;
b) Asbestos waste;
Chu burning disposal residue;
GB16487.9— 1996 | |e)
Various liquid waste;
Clinical waste;
Kitchen waste, bathroom waste;||tt| | Sealed containers, etc.
4.7 In addition to the wastes listed in the above items, other entrained wastes (such as waste paper, waste wood blocks, slag, etc.) The total weight of soil, waste fiber ropes, waste glass, cement blocks and stripped rust, etc.) shall not exceed 2% of the weight of imported waste wires and cables
4.8 Imported waste wires and cables shall not contain oil-sealed cables and optical cables. 5 Inspection
5.1 The inspections in Articles 4.1 and 4.3 of this standard shall be carried out in accordance with the provisions of GB/T15555.1~15555.12-1995. 5.2 The inspection in Article 4.2 of this standard shall be carried out in accordance with the provisions of GB13015-91. 5.3 The inspections in Articles 4.4 and 4.5 of this standard shall be carried out in accordance with the provisions of SN0570--1996. 5.4 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of SN0580-1996.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 16840.3-1997 Technical identification methods for electrical fire causes Part 3: Component analysis method
- QB/T 1540-1992 Brass wire for clocks
- GB/T 5413.24-1997 Determination of chlorine in infant formula and milk powder
- SJ/T 10192-1991 Weather radar for Type 714
- GB 14821.1-1993 Electric shock protection of electrical installations in buildings
- JB/T 2648.1-1995 Main shapes and basic dimensions of blades for bulldozers, scrapers and graders
- JB/T 7604.2-1994 Internal thread for installing wire thread inserts
- JB/T 6969-1993 Jet-suction welding torch
- GB/T 39755.1-2021 Electronic records management capability system—Part 1:General requirements
- GB/T 15303-1994 Measurement methods for pyroelectric television cameras
- GB/T 4091-2001 Shewhart control charts
- GB/T 15165-1994 Terminology for railway stations and hubs
- GBJ 130-1990 Technical specification for reinforced concrete raised slab structures
- JB/T 53398-2000 Rolling bearing product quality classification
- JB/T 6142.4-1992 Cone seal 45° wire braided hose assembly
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com