Optimum diameters of leads of capacitors and resistors
time:
2024-07-13 18:52:24
- SJ 2420-1983
- in force
Standard ID:
SJ 2420-1983
Standard Name:
Optimum diameters of leads of capacitors and resistors
Chinese Name:
电容器和电阻器引出线的优选直径
Standard category:
Electronic Industry Standard (SJ)
-
Date of Release:
1983-12-05 -
Date of Implementation:
1984-06-01
China Standard Classification Number:
General>>Standardization Management and General Provisions>>A01 Technical Management
Description (Translated English) / downloadSkip to download
Summary:
SJ 2420-1983 Preferred diameters of capacitor and resistor lead wires SJ2420-1983 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
The Ministry of Electronics Industry of the People's Republic of China Standard SJ2420-83
III IEC301
Preferred diameter of capacitor and resistor lead wires 1983-12-05 Issued
1984-06-01 Implementation
Ministry of Electronics Industry of the People's Republic of China
Ministry of Electronics Industry of the People's Republic of China Standard SJ2420-83
III IEC--301
1971 Second Edition)
(Revised No. 1972.12)
Preferred diameter of capacitor and resistor lead wires This standard specifies the preferred diameter of capacitor and resistor lead wires. The wire diameter used to manufacture the lead terminal may not necessarily comply with the provisions of this standard. www.bzxz.net
Preferred diameter of lead wire
Minimum size
Nominal diameter
Published by the Ministry of Electronics Industry of the People's Republic of China on December 5, 1983 Maximum size
Implemented on June 1, 1984
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
III IEC301
Preferred diameter of capacitor and resistor lead wires 1983-12-05 Issued
1984-06-01 Implementation
Ministry of Electronics Industry of the People's Republic of China
Ministry of Electronics Industry of the People's Republic of China Standard SJ2420-83
III IEC--301
1971 Second Edition)
(Revised No. 1972.12)
Preferred diameter of capacitor and resistor lead wires This standard specifies the preferred diameter of capacitor and resistor lead wires. The wire diameter used to manufacture the lead terminal may not necessarily comply with the provisions of this standard. www.bzxz.net
Preferred diameter of lead wire
Minimum size
Nominal diameter
Published by the Ministry of Electronics Industry of the People's Republic of China on December 5, 1983 Maximum size
Implemented on June 1, 1984
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- QB/T 2254-1996 Sewing machine thread
- GB/T 3197-2001 Aluminium and aluminium alloy wire for welding electrodes
- JG/T 3015.1-1994 Sliding automatic door JG/T3015.1-94
- DL/T 575.7-1999 Ergonomic principles for the design of control centres Part 7 : Control room layout
- GB/Z 17625.6-2003 Electromagnetic compatibility limits for harmonic currents generated by equipment with a rated current greater than 16A in low-voltage power supply systems
- JB/T 1093-1983 Basic test methods for traction motors
- GB/T 25161.1-2010 Packaging sacks—Dimensional tolerances—Part 1:Paper sacks
- GB/T 4334.5-2000 Test method for corrosion of stainless steel by sulfuric acid and copper sulfate
- JB/T 10425.2-2004 Yaw system of wind turbine generator set Part 2: Test methods
- JB/T 8813-1998 Steering brake belt for crawler bulldozers
- JB/T 2001.45-1999 Four-valve distributor for water system (with servo) (PN=20, 31.5MPa)
- GB 9052.1-1998 Oil and gas field liquefied petroleum gas
- GB/T 8834-1988 Determination of relevant physical and mechanical properties of ropes
- SJ/T 10587.2-1994 Technical data of Type DM-308 electronic glass
- GB/T 6379.6-2009 Accuracy(trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com