
GB/T 5216-2004 Guaranteed hardenability structural steel
time:
2024-08-04 20:06:16
- GB/T 5216-2004
- in force
Standard ID:
GB/T 5216-2004
Standard Name:
Guaranteed hardenability structural steel
Chinese Name:
保证淬透性结构钢
Standard category:
National Standard (GB)
-
Date of Release:
2004-01-19 -
Date of Implementation:
2004-07-01
Standard ICS number:
Metallurgy>>Steel Products>>77.140.20 Stainless SteelChina Standard Classification Number:
Metallurgy>>Steel Products>>H40 General Steel Products
alternative situation:
GB/T 5216-1985
publishing house:
China Standards PressISBN:
155066.1-20823Publication date:
2004-05-15
Release date:
1985-07-18Review date:
2004-10-14Drafter:
Chen Silian, Wang Maoqiu, Jiayan, Huirong, Du Caixia, Mu Jingfei, Zhenjuan, Dai QiangDrafting Organization:
Central Iron and Steel Research Institute, Jiangyin Xingcheng Iron and Steel Co., Ltd.Focal point Organization:
National Technical Committee on Steel StandardizationProposing Organization:
China Iron and Steel AssociationPublishing Department:
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of ChinaCompetent Authority:
China Iron and Steel Association

Skip to download
Summary:
This standard specifies the dimensions, shape, weight and permissible deviation, technical requirements, test methods, inspection rules, packaging, marking and quality certificates of hot-rolled and hot-forged structural steels with guaranteed hardenability. This standard applies to hot-rolled and hot-forged structural steel bars with guaranteed hardenability and a diameter or thickness of not less than 30 mm for machinery manufacturing. The hardenability of steel is measured by the end quenching method or calculated by the formula. GB/T 5216-2004 Guaranteed Hardenability Structural Steel GB/T5216-2004 Standard download decompression password: www.bzxz.net

Some standard content:
National Standard Amendment Notice
Standard Announcement
China Standardizationwww.bzxz.net
GB/T5216-2004 "Ensure Hardenability Structural Steel" National Standard No. 1 Amendment CAS
This amendment was approved by the National Standardization Committee on December 27, 2001 with the document No. 75 of National Standard No. 1 (2004), and will be implemented on May 1, 2005. Standard name: GB/T5216-2004 "Ensure Hardenability Structural Steel" The carbon content of 15CrMoH grade (serial number 15) in Table 1 is changed from 0.17%-0.23% to 0.12%0.18%. Published in the 3rd issue of "China Standardization" in 2005
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard Announcement
China Standardizationwww.bzxz.net
GB/T5216-2004 "Ensure Hardenability Structural Steel" National Standard No. 1 Amendment CAS
This amendment was approved by the National Standardization Committee on December 27, 2001 with the document No. 75 of National Standard No. 1 (2004), and will be implemented on May 1, 2005. Standard name: GB/T5216-2004 "Ensure Hardenability Structural Steel" The carbon content of 15CrMoH grade (serial number 15) in Table 1 is changed from 0.17%-0.23% to 0.12%0.18%. Published in the 3rd issue of "China Standardization" in 2005
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- SY/T 10018-1998 Technical Guide for Marine Positioning Data Processing
- GB/T 13217.2-1991 Test method for gloss of plastics gravure printing inks
- HG 20237-1994 Provisions on technical documents for the completion of chemical industry engineering construction
- JB/T 3688.1-1996 Basic parameters of wheel loaders
- GB/T 325.3-2010 Packaging container—Steel drums—Part 3:Non-removable head(tight head)drums with a minimum total capacity of 212L,216.5 L and 230 L
- GB/T 15856.3-2002 Cross recessed countersunk head self-drilling and tapping screws
- JB/T 8115.1-2000 Paper cutter
- JB/T 8482-1996 Technical requirements for screw lathes
- SJ 3236-1989 Method for determination of trace oxygen in electronic grade gases-Phosphor scintillating method
- GB/T 2538-1988 Crude oil testing methods
- GB 18420.1-2001 Biological toxicity classification of pollutants in offshore oil exploration and development
- JB/T 8013.1-1999 Machine tool fixture parts and components positioning bushings
- SB/T 10541-2009 Rule of installation and service for room air-conditioner
- QB/T 2384-1998 Wooden writing desk
- JB/T 7990-1998 Superhard abrasives - artificial diamond powder and cubic boron nitride powder
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com