GB/T 5845.5-1986 Urban public transport signs and subway signs

This standard specifies the signs for urban subways, with the aim of achieving unified and standardized management of the urban public transportation industry and facilitating public identification. GB/T 5845.5-1986 Urban Public Transportation Signs Subway Signs GB/T5845.5-1986 Standard download decompression password: www.bzxz.net

National Standard of the People's Republic of China
Urban public transport signs
Subway signs
MarksforurbanpublictransportMarkforsubway
UDC 656.054
GB 5845.5--86
This standard specifies urban subway signs. The purpose is to achieve unified and standardized management of urban public transport industry and facilitate public identification. Scope of application
Subway enterprise offices (buildings); subway station entrances and exits,
station signs,
rear auxiliary institutions (such as vehicle depot, power depot, engineering section, etc.), tickets,
office supplies (such as official letterhead, envelope, etc.), clothing (chest badges, armbands);
souvenirs.
2 Logo Graphics (See Figure 1)
3·Color of Logo Graphics
3.1 The basic color of the logo graphics is blue (peacock blue), and the pattern color is white, see Figure 1 and Table 1. Issued by the State Bureau of Standards on February 8, 1986
Implemented on September 1, 1986
Letters "G", "D"
GB 5845.5--86
3.2 For buildings,
badges, etc., the outline of the letters "G", "D" may be gold, see Table 2 and Figure 2.
Letters "G\, "D"
White with gold edges
3.3 For bus stops and vehicles, the colors that coordinate with the bus stops and vehicles can be used, but the colors used shall not exceed two except gold. 3.4 Reference color samples are shown in Table 3:
(peacock blue)
4 Drawing of logo graphics
Sign graphics shall be drawn in accordance with the relevant provisions of GB'3818-83 "Public Information Graphics Symbols". Sample
Reduction and enlargement of original graphics
GB5845.5- -86
5.1 If the original graphic needs to be reduced or enlarged according to actual needs, the method of making squares on the original graphic can be used to reduce or enlarge it, but the reduced graphic must be clearly identifiable. 5.2 When reducing or enlarging the original graphic, the relevant proportions of the original graphic should be maintained. 6. Inspection and maintenance
The logo graphic must be kept clear and complete. When the image is damaged, the color is contaminated or changed, and the fading does not meet the relevant provisions of this standard, it should be repaired or replaced in time. The inspection time should be at least once a year. 28
GB 5845.5.-86
Appendix A
Guidance examples for the use of logosbzxz.net
(reference)
A.1 The recommended dimensions for the logos of rear auxiliary mechanisms are shown in Figures A1 and A2: Enterprise logo
Unit name
Auxiliary mechanism name
Enterprise logo
Auxiliary mechanism name
A.2 Examples of the use of logos on rear auxiliary mechanisms are shown in Figures A3 and A4: [=0.618h
b,z0.57 h
h#0.6.18 yuan
b,= 0.141
GB5845.586
Beijing Railway Company
Vehicle Depot
Transformer Station
Additional Notes:
This standard was proposed by the Ministry of Urban and Rural Construction and Environmental Protection of the People's Republic of China and is under the jurisdiction of the Beijing Public Transport Research Institute. This standard was drafted by the Guangzhou Public Utilities Bureau. The main drafters of this standard are Zeng Fanjun, Zhang Lide and Lai Linchuan. 30
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.