INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 3759-1983 Nuts for ferrule type pipe fittings

time: 2024-08-10 19:56:11
  • GB/T 3759-1983
  • Abolished

Basic Information

  • Standard ID:

    GB/T 3759-1983

  • Standard Name:

    Nuts for ferrule type pipe fittings

  • Chinese Name:

    卡套式管接头用螺母

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1983-06-17

  • Date of Implementation:

    1984-04-01

  • Date of Expiration:

    2008-11-01

standard classification number

  • Standard ICS number:

    21.060.60;

  • China Standard Classification Number:

    Machinery>>General Parts>>J15 Pipe Accessories

associated standards

Publication information

  • publishing house:

    China Standards Press

  • Publication date:

    1984-04-01

Other Information

  • Release date:

    1983-06-17

  • Review date:

    2004-10-14

  • Drafting Organization:

    Standardization Institute of the Ministry of Machinery Industry

  • Focal point Organization:

    National Technical Committee for Standardization of Pipe Accessories

  • Publishing Department:

    China Machinery Industry Federation

  • Competent Authority:

    China Machinery Industry Federation
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

This standard is only applicable to ferrule type pipe fittings. GB/T 3759-1983 Nuts for ferrule type pipe fittings GB/T3759-1983 Standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China
Nuts for Compression Fittings
Bite type tube fittings-NutsThis standard applies only to compression fittings. 0.5X46
Marking example
Nuts with nominal pressure class J and outer diameter D of 14mm. Nut J14 GB 3759—83
Published by the National Bureau of Standards on June 17, 1983
UDC 621.643.4
:621.882/.887
GB3759—88
Others√
Implemented on April 1, 1984www.bzxz.net
Except for Mengmengda
M12 ×1.25
M30 ×2
M33×2
M36×2
M42×2
M45×2
M48×2
M52×2
M18×1,5
M22×1.5.
M27 × 1.5
M30×2
M33×2
M39×2
GB 3759-83
Limit deviation of nominal size
Note, (reclamation is calculated value, specific gravity is 7.85kg/dm.②Under the condition that it does not affect the use, L dimension is allowed to grow into a hexagonal shape. Technical conditions shall be in accordance with the provisions of GB3765-83. Additional remarks:
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry.e
(kg/100 pieces)
This standard is drafted by the Standardization Institute of the Ministry of Machinery Industry of Taoyuan, and drafted by Xiyang Heavy Machinery Factory, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai No. 1 Bureau of Mechanical and Electrical Science and Technology Information Institute, and the 708th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Tu Mu. From the date of implementation of this standard, the original departmental standard JB1981-77 "Nuts for tube fittings" will be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]