GB 8662-1988 Surgical blade and surgical handle matching dimensions

This standard specifies the dimensions of detachable surgical blades and surgical handles. GB 8662-1988 Dimensions of surgical blades and surgical handles GB8662-1988 Standard download decompression password: www.bzxz.net

National Standard of the People's Republic of China
Fitting dimension between knife blades and knife handles
Fitting dimension between knife blades and knife handlesThis standard specifies the dimensions of the fit between detachable surgical blades and surgical handles. This standard is equivalent to the international standard IS0-7740-1985 (E) "Small specification fittings for surgical instruments (No. 3)"
UDC615.472
GB 8662---88
ISO7740--1985 (E)
-Scalpels with detachable blades---Fitting handles and blades with small fitting bodies and holes, the fitting dimensions must comply with the provisions of Table 1 and Figures 1 and 2. Table 1
Large-size mating parts (No. 4)
Matching size
For the knife handle and blade with large mating body and hole, the matching size must comply with the provisions of Table 2 and Figures 1 and 2. Table 2
Approved by the State Medical Administration in 198802-08
Products and industry information for free download
Implementation on 1988-10-01
Additional instructions:Www.bzxZ.net
GB8662—88
Figure 1 Removable surgical blade
Figure 2 Surgical knife handle
This standard was proposed by the National Technical Committee for Standardization of Surgical Instruments and is under the jurisdiction of the Technical Unit for Standardization of Medical Instruments of the State Medical Administration.
This standard was drafted by Beijing Surgical Instrument Factory. The main drafter of this standard is Wang Guilan.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.