GB/T 3453-1994 Basic control regulations for data communication
time:
2024-08-10 22:55:00
- GB/T 3453-1994
- in force
Standard ID:
GB/T 3453-1994
Standard Name:
Basic control regulations for data communication
Chinese Name:
数据通信基本型控制规程
Standard category:
National Standard (GB)
-
Date of Release:
1982-01-02 -
Date of Implementation:
1995-03-01
Standard ICS number:
Information technology, office machinery and equipment >> 35.100 Open Systems Interconnection (OSI)China Standard Classification Number:
Electronic Components and Information Technology>>Information Processing Technology>>L78 Data Information
alternative situation:
GB 3453-1982Procurement status:
NEQ ISO 745-1975
Release date:
1982-12-31Review date:
2004-10-14Drafter:
Zhang Baodong, Wang Maohong, Zhang Wenhui, Ye ShaozhiDrafting Organization:
North China Institute of Computing Technology, Ministry of MachineryFocal point Organization:
National Information Technology Standardization Technical CommitteeProposing Organization:
Ministry of Machinery and Electronics Industry of the People's Republic of ChinaPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Standardization Administration
Description (Translated English) / downloadSkip to download
Summary:
The basic control procedure is mainly applicable to the communication between data terminal equipment (DCE)/data circuit terminating equipment (DCE) or DTE/DTE in the network. This standard only stipulates the transmission on one data link and does not involve the operation of "serial" data links. GB/T 3453-1994 Data Communication Basic Control Procedure GB/T3453-1994 Standard Download Decompression Password: www.bzxz.net
Standard contentSome standard content:
0 Introduction
National Standard of the People's Republic of China
Basic mode control procedures for data communicationsbzxZ.net
GB/T3453-94
Replaces GB345382
Data communication system can be regarded as a collection of some data terminal devices and interconnected networks that can exchange information. -A data link is composed of many devices connected to the same network, working at the same rate and the same coding. Any "store and forward" and intermediate data processing will separate the data link. A system contains one or more data links. The data link control procedure is used to monitor the transmission of information in the data link. According to the mode of operation, it can be divided into many types. This standard is one of them, called "basic mode", and its control function is realized by transmitting control characters. 1 Subject content and scope of application
The basic control procedure is mainly applicable to network data terminal equipment (DTE)/data circuit terminating equipment
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard of the People's Republic of China
Basic mode control procedures for data communicationsbzxZ.net
GB/T3453-94
Replaces GB345382
Data communication system can be regarded as a collection of some data terminal devices and interconnected networks that can exchange information. -A data link is composed of many devices connected to the same network, working at the same rate and the same coding. Any "store and forward" and intermediate data processing will separate the data link. A system contains one or more data links. The data link control procedure is used to monitor the transmission of information in the data link. According to the mode of operation, it can be divided into many types. This standard is one of them, called "basic mode", and its control function is realized by transmitting control characters. 1 Subject content and scope of application
The basic control procedure is mainly applicable to network data terminal equipment (DTE)/data circuit terminating equipment
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 6643-1993 Rolling bearing four-point contact ball bearing axial clearance
- SJ/T 10324-1992 Completeness of technological document
- JB/T 9127-2000 Technical specification for shot peening of cylindrical helical springs
- QB/T 2150-1995 Industrial sewing machine GN1 medium speed overlock machine head
- HG/T 3564-1989 Type 5152, 2152, 6152 Motion Picture Sound Track Negative Film
- GB/T 12967.1-1991 Anodizing of aluminum and aluminium alloys-Measurmeent of mean specific adrasion resistance of anodic oxidation coatings with an adrasive jet test apparatus
- JB/T 1828.1-1999 Blade types and basic parameters for shearing machines
- HG/T 3063-1999 Comparative method for the color of precipitated hydrated silica in rubber compounding ingredients
- JB/T 8012.1-1999 Machine tool fixture parts and components hook-shaped clamps
- GB/T 2930.7-2001 Inspection procedures for forage grass seeds and identification of species and varieties
- CB/T 3143-1999 Bolt anchor release device
- JB/T 7948.12-1999 Chemical analysis method for melting flux - EDTA volumetric method for determination of calcium oxide and magnesium oxide content
- GB 50161-1992 Safety Code for Design of Fireworks and Firecrackers Factories
- GB 15999-1995 Diagnostic criteria and management principles for hepatitis D virus
- GB/T 14556-1993 Interface requirements for marine navigation radar
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com