GB/T 15530.3-1995 Copper alloy plate flat welding flange
time:
2024-08-08 18:57:50
- GB/T 15530.3-1995
- in force
Standard ID:
GB/T 15530.3-1995
Standard Name:
Copper alloy plate flat welding flange
Chinese Name:
铜合金板式平焊法兰
Standard category:
National Standard (GB)
-
Date of Release:
1995-04-02 -
Date of Implementation:
1996-01-01
Standard ICS number:
Fluid systems and general parts>>Pipeline components and pipelines>>23.040.60 Flanges, pipe joints and connecting partsChina Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
Release date:
1995-04-02Review date:
2004-10-14Drafter:
Li JunyingDrafting Organization:
Standardization Research Institute of the Ministry of MachineryFocal point Organization:
National Technical Committee for Standardization of Pipe AccessoriesProposing Organization:
Ministry of Machinery Industry of the People's Republic of ChinaPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Machinery Industry Federation
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the types and dimensions of copper alloy plate type flat welding flanges with nominal pressure PN of 0.6, 1.0, 1.6 and 2.0 MPa. This standard applies to copper alloy plate type flat welding flanges with nominal pressure PN of 0.6~2.0 MPa and nominal diameter DN10~800 mm. GB/T 15530.3-1995 Copper alloy plate type flat welding flange GB/T15530.3-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- QB/T 2236-1996 Neutral paraffin paper
- QB/T 2314-1997 Watch dial nail diameter size series
- GB/T 3166-1988 Hot water boiler parameter series
- CB/T 254-1997 Ship bottom drain plug
- GB 19337-2003 Avermectin emulsifiable concentrate
- HG/T 2594-1994 Various colors of amino baking enamel
- GB/T 15020-1994 Blank detail specification for quartz crystal components for electronic equipment. Resistance welded quartz crystal components. Assessment level E
- JGJ 113-1997 Technical Specification for Application of Architectural Glass JGJ113-97
- GB/T 5070.7-2002 Chemical analysis methods for magnesia-chromium refractories Part 7: EDTA volumetric method for determination of calcium oxide content
- JB/T 2231.1-1999 Reciprocating piston compressor parts Part 1: Shaft and pin outer diameter dimensions
- CJJ 30-1989 Construction and acceptance regulations for rigid polyvinyl chloride pipes for building drainage CJJ30-89
- JB/T 4279.5-1994 Verification methods for testing instruments and equipment for enameled winding wires - Snap-break tester
- QB/T 1290.5-1991 Steel Hammer Inspection Hammer
- HG/T 20696-1999 Design regulations for glass fiber reinforced plastic chemical equipment
- GB 16298-1996 Civil airport environmental sanitation standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com