GB 16487.12-1996 Imported Waste Environmental Protection Control Standard Waste Plastics

GB 16487.12-1996 Environmental Protection Control Standard for Imported Waste Waste Plastics GB16487.12-1996 Standard download and decompression password: www.bzxz.net

21996 | | tt | | GB16487.12 | Environmental pollution caused by harmful waste contained in waste plastics. This standard will be implemented on a trial basis from December 1, 1996. This standard is proposed by the Pollution Control Department of the National Environmental Protection Administration. The National Environmental Protection Administration is responsible for interpreting this standard. 1Scope
National Standard of the People's Republic of China
Environmental protection control standard for imported waste
Waste plastics
(Trial)
Environmental protection control standard for imported scrap material
-Plastic scrap as raw materialGB16487.12-1996
This standard specifies the control requirements for inclusions and radioactive contamination in imported waste plastics that have an impact on the environment. This standard applies to the import of the following waste plastics. Customs commodity number
3915.1000
3915.2000
3915.3000
3915.9000
2 Reference standards
Waste name
Ethylene polymer Waste scraps and scraps of styrene polymers www.bzxz.net
Waste scraps and scraps of styrene polymer Waste scraps and scraps of vinyl chloride polymer Waste scraps and scraps of other plastics
GB5085.3—1996 Hazard Waste Identification Standard Leaching Toxicity Identification SN0570--1996 Inspection Procedure for Radioactive Contamination of Imported Scrap Metal GB/T15555.115555.12-1995 Determination Method for Leaching Toxicity of Solid Waste SN0625.1~0625.2-1997 Inspection Procedure for Imported Waste Plastics Used as Raw Materials 3 Definition || tt||This standard adopts the following definitions. | | tt | shape, block, granular or powdery). 3.2 Entrained waste
refers to waste materials mixed with imported waste plastics during the collection, packaging and transportation processes (excluding imported waste plastic packaging materials). 4 Control Standards and Requirements
4.1 It is prohibited to import thermosetting waste plastic products and used waste plastic products that have not been processed and cleaned. 4.2 Imported waste plastics are prohibited from being mixed with clinical waste, medical waste and explosive waste. 4.3 Imported waste plastics are prohibited from being mixed with fire-resistant substances whose concentration of harmful substances in the leachate exceeds the identification standard value in GB5085.3-1996.
GB16487.12-1996
4.4 It is prohibited to mix imported waste plastics with entrained waste whose leachate pH value is equal to or greater than 12.5 and equal to or less than 2. 4.5 Radioactive waste is prohibited from being included in imported waste plastics. 4.6 The external penetration radiation value of imported waste plastics shall not exceed 3 times the local natural background radiation value, the α surface pollution level inspection value shall not exceed 0.04Bq/cm, and the β surface pollution level inspection value shall not exceed 0.4Bq/cm. 4.7 The total weight of the following wastes contained in imported waste plastics shall not exceed one ten thousandth of the weight of imported waste plastics: a) pesticide waste and other chemical wastes and their contents; b) various liquid wastes;
c) Kitchen waste, bathroom waste;
d) closed containers and used complete plastic containers, etc. 4.8 In addition to the wastes listed in the above articles, the total weight of other entrained wastes (such as waste wood chips, scrap metal, waste fabrics, waste glass, thermosetting plastics, composite plastics, waste rubber, soil and sand, etc.) shall not exceed the weight of imported waste plastics. thousandth. 5 Inspection
5.1 The inspections in Articles 4.3 and 4.4 of this standard shall be carried out in accordance with the provisions of GB/T15555.1～15555.12-1995. 5.2 The inspections in Articles 4.5 and 4.6 of this standard shall be carried out in accordance with the provisions of SN0570-1996. 5.3 The inspection of Articles 4.1, 4.2, 4.7 and 4.8 of this standard shall be carried out in accordance with the provisions of SN0625.1~0625.2-1997
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.