JB/T 9936.1-1999 Parameters of flat jaw pliers for tilting machines

JB/T 9936.1-1999 This standard is a revision of ZB J52 005.1-89 "Parameters of flat-nose pliers for tilting machines". During the revision, only editorial changes were made according to relevant regulations, and the main technical content remained unchanged. This standard is part of the JB/T 9936 "Flat-nose pliers for tilting machines" series of standards, which includes the following three parts: JB/T 9936.1-1999 Parameters of flat-nose pliers for tilting machines JB/T 9936.2-1999 Accuracy inspection of flat-nose pliers for tilting machines JB/T 9936.3-1999 Technical conditions for flat-nose pliers for tilting machines This standard specifies the basic parameters and dimensions of flat-nose pliers for tilting machines. This standard is applicable to flat-nose pliers for tilting machines of new or improved design. This standard was first issued in March 1989. JB/T 9936.1-1999 Parameters of Flat-nose Pliers for Tilting Machines JB/T9936.1-1999 Standard Download Decompression Password: www.bzxz.net

JC525.No.60.20
Standard of the Machinery Industry of the People's Republic of China
JB/T9936.19936,3-1999
Flat-mouth molybdenum for tilting machines
Published on 1999-05-20
State Machinery Industry Bureau
2000-01-01 Implementation
JB/T9936.1-1999
This standard is a revision of J52005.1-89 (flat pliers for tilting machines). The original version was formulated based on the market demand for flat pliers for tilting machines and the use requirements of users. Its technical content can still meet the current scientific and technological level and meet the needs of production and use. This standard is consistent with the technical content of ZBJ52005.1-89, and has only been recompiled according to relevant regulations. This standard is a part of the series of standards for flat pliers for tilting machines. B9936 is under the general title of (flat pliers for tilting machines) and includes the following three parts:
Part 1 (JB/T 9936.1 J: Reference); Part 2 (i.e. JR/ 99362 J: Precision inspection; Part 1 (i.e., JBT9936.3 technical case. This standard replaces ZBJ52005.1-89 from the date of implementation. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is submitted by the Machine Tool Parts Branch of the National Technical Committee for Standardization of Metal Cutting Machine Tools. The drafting unit responsible for this standard is Beijing Machine Tool Accessories Factory. This standard was first issued in March 1989. Www.bzxZ.net
Machinery Industry Standard of the People's Republic of China
Flat-nose pliers for tilting machines
This standard specifies the size and shape of flat-nose pliers for tilting machines. This standard applies to new designs or Improved design of the time-slow machine with flat. 2 Type and number
Type I and type see factor 1 and country 2. Parameters and dimensions see table 1, main parts see table 2. Figure! Type [
National Machinery Industry Bureau 1099-05-20 approved JBT9936.1-1999
2152 (05184
2000-01-01 practical
design principle
needle mouth maximum skin
positioning key compensation width 4
account diameter
world standard network
position: the size in brackets is 1 other equal energy bay
JB/T 9936.t—1999
Figure 2 Type
14 4[2
Mi2(Mi
M15(M12:
Xuebuxi
JB/79936.1-1999
Part Name
Le: Pad
Activity Discussion
Part Name
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.