JB/T 9636-1999 Method for compiling models of steam turbine auxiliary equipment
time:
2024-08-12 07:43:59
- JB/T 9636-1999
- in force
Standard ID:
JB/T 9636-1999
Standard Name:
Method for compiling models of steam turbine auxiliary equipment
Chinese Name:
汽轮机辅机型号编制方法
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
China Standard Classification Number:
Electrical Engineering>>Power Equipment for Power Generation>>K54 Steam Turbine and Auxiliary Equipment
alternative situation:
ZB K54017-1988
Focal point Organization:
National Technical Committee for Steam Turbine StandardizationPublishing Department:
National Technical Committee for Steam Turbine Standardization
Skip to download
Summary:
JB/T 9636-1999 This standard is a revision of ZB K54 017-88 "Steam Turbine Auxiliary Equipment Model Compilation Method". This standard specifies the steam turbine auxiliary equipment model compilation method. This standard applies to the model compilation of the main steam turbine auxiliary equipment products. This standard was first issued in 1979 as JB 2651-79, and was first revised to ZB K54 017-88 on July 20, 1988. This is the second revision. JB/T 9636-1999 Steam Turbine Auxiliary Equipment Model Compilation Method JB/T9636-1999 Standard Download Decompression Password: www.bzxz.net
Some standard content:
Mechanical Industry Standard of the People's Republic of China
JB/T9636
1999-08-06
Wa Xianji Dong
2000-01-01
JB/T9636
This standard is a revision of the model design method of ZBK5017-88 steam turbine auxiliary equipment
This standard basically maintains the original standard in terms of technical content, with only a few changes. This standard will be adopted from the date of implementation. This standard is proposed and unified by the National Steam Turbine Standardization Technical Committee. The drafting unit of this standard: Shanghai Power Generation Equipment Design Institute. The main drafter of this standard: Liu Chen, this standard was first issued in 1979.
Ji Jiao Kui Lu Wa Yi Xian
This standard specifies the method for compiling the model guide of steam turbine auxiliary equipment. Coverage
This standard applies to the model guide of the main auxiliary equipment products of steam turbines. Product model
The model of steam turbine auxiliary equipment consists of three parts, and each part is separated by a short line, AX/XX
JB/T9636
ZBK54017
The first part of the model of steam turbine auxiliary equipment represents the product name, expressed in Malaysian phonetic letters (see Table 1) 2.1
Table 1 Product code
Steam heater
Low pressure heater
High pressure heaterwww.bzxz.net
Lubricating oil heater
Steam jet air heater
Water jet air heater
Start Vacuum extractor
Steam seal beater
Steam ejector
Water filter
Oil filter
Cheng temperature pressure reducer
Reducing road
Glass water expansion tank
Following water Ling welcomer
Exhaust steam check network
Electromagnetic room
Drainage and request network
Wa extremely slow 1999-08-06 tumor
2000-01-01 cable
Stop country reading
With flow valve
Safety
Gland flushing foot
Steam separation and recirculation
Sugar purification device
Secondary room
Recycling network
Water-water heat exchanger
JB/T9636
Table 1 yuan)
The second part indicates the main number of auxiliary equipment (see Table 2 for regulations 3, expressed in Arabic numerals, when there are more than two main numbers, they are separated by 2.2
Main zeros
Handling exchanger
Steam shaft degasser
Water jet vacuum pump
Through equipment
Dehumidification and pressure reduction circuit, flow reducer| |tt||Steam trap
Steam expansion tank
Steam seal air blower
Starting air blower
Oil-chemical unit
Heat exchange unit
Amount of dry air blown out
Amount of dry air extracted
International pressure and working conditions
Export gas
Pressure, temperature, resistance
International pressure and public equipment (through or with import and export) storage area
Amount of dry air pushed out
Amount of dry air extracted
The third part is the number of auxiliary machine modification designs, expressed in Arabic numerals. Examples of auxiliary machine model compilation: 3.1N560-1
indicates a steam generator with a first modified design and a cooling area of 560m2; 3.1JG-40-2
indicates a high-pressure heater with a second modified design and a heating area of 100m2; 3.3FH-6.28/100-1
indicates a stopcock with a first modified design and a nominal pressure of 6.28MPa and a nominal diameter of 100mm. 2
Xinkuilu
JB/T9636
Lai880b1230
19XXXXling
100044
WanduanX/X
TravelXXX,XXX
19XXjiXXcabin
LengXdai
DepxXX.XXwing
Xianjioupai
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
JB/T9636
1999-08-06
Wa Xianji Dong
2000-01-01
JB/T9636
This standard is a revision of the model design method of ZBK5017-88 steam turbine auxiliary equipment
This standard basically maintains the original standard in terms of technical content, with only a few changes. This standard will be adopted from the date of implementation. This standard is proposed and unified by the National Steam Turbine Standardization Technical Committee. The drafting unit of this standard: Shanghai Power Generation Equipment Design Institute. The main drafter of this standard: Liu Chen, this standard was first issued in 1979.
Ji Jiao Kui Lu Wa Yi Xian
This standard specifies the method for compiling the model guide of steam turbine auxiliary equipment. Coverage
This standard applies to the model guide of the main auxiliary equipment products of steam turbines. Product model
The model of steam turbine auxiliary equipment consists of three parts, and each part is separated by a short line, AX/XX
JB/T9636
ZBK54017
The first part of the model of steam turbine auxiliary equipment represents the product name, expressed in Malaysian phonetic letters (see Table 1) 2.1
Table 1 Product code
Steam heater
Low pressure heater
High pressure heaterwww.bzxz.net
Lubricating oil heater
Steam jet air heater
Water jet air heater
Start Vacuum extractor
Steam seal beater
Steam ejector
Water filter
Oil filter
Cheng temperature pressure reducer
Reducing road
Glass water expansion tank
Following water Ling welcomer
Exhaust steam check network
Electromagnetic room
Drainage and request network
Wa extremely slow 1999-08-06 tumor
2000-01-01 cable
Stop country reading
With flow valve
Safety
Gland flushing foot
Steam separation and recirculation
Sugar purification device
Secondary room
Recycling network
Water-water heat exchanger
JB/T9636
Table 1 yuan)
The second part indicates the main number of auxiliary equipment (see Table 2 for regulations 3, expressed in Arabic numerals, when there are more than two main numbers, they are separated by 2.2
Main zeros
Handling exchanger
Steam shaft degasser
Water jet vacuum pump
Through equipment
Dehumidification and pressure reduction circuit, flow reducer| |tt||Steam trap
Steam expansion tank
Steam seal air blower
Starting air blower
Oil-chemical unit
Heat exchange unit
Amount of dry air blown out
Amount of dry air extracted
International pressure and working conditions
Export gas
Pressure, temperature, resistance
International pressure and public equipment (through or with import and export) storage area
Amount of dry air pushed out
Amount of dry air extracted
The third part is the number of auxiliary machine modification designs, expressed in Arabic numerals. Examples of auxiliary machine model compilation: 3.1N560-1
indicates a steam generator with a first modified design and a cooling area of 560m2; 3.1JG-40-2
indicates a high-pressure heater with a second modified design and a heating area of 100m2; 3.3FH-6.28/100-1
indicates a stopcock with a first modified design and a nominal pressure of 6.28MPa and a nominal diameter of 100mm. 2
Xinkuilu
JB/T9636
Lai880b1230
19XXXXling
100044
WanduanX/X
TravelXXX,XXX
19XXjiXXcabin
LengXdai
DepxXX.XXwing
Xianjioupai
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- QB/T 2178-1995 Internal gearshift rear axle for bicycles
- JB/T 1035-2002 Technical specification for manufacturing copper air separation equipment
- JB/T 7890-1999 Fan coal mill
- GB 16556-1996 Self-contained air breathing apparatus
- GB 6245-1998 Fire pump performance requirements and test methods
- GB/T 2855.12-1990 Die sliding guide die seat intermediate guide column circular lower die seat
- GB/T 13217.5-2008 Test method for initial dryness of liquid ink
- JB/T 4729-1994 Spinning Head
- JB/T 7780.5-1995 Test Method for Mechanical and Physical Properties of Wire for Rivet Contacts
- GB 2700-1987 Acceptance regulations for jute yarn and thread
- GA/T 496-2004 General technical requirements for automatic red light violation recording systems
- GB 4064-1983 Guidelines for safety design of electrical equipment
- SL/T 153-1995 Technical Specification for Low-pressure Pipeline Water Supply Irrigation Project (Part of Well Irrigation Area) SL/T 153-95
- SC/T 9010-2000 渔港总体设计规范
- GB 15931-1995 Test methods for smoke exhaust fire dampers
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com