JB/T 3713.1-1999 Basic parameters of double disc shot blasting machine

JB/T 3713.1-1999 This standard is a revision of JB 3713.1-84 "Basic Parameters of Double Disc Shot Blaster". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged. This standard specifies the basic parameters of double disc shot blasters. This standard is applicable to double disc shot blasters. This standard was first issued in June 1984. JB/T 3713.1-1999 Basic Parameters of Double Disc Shot Blaster JB/T3713.1-1999 Standard download decompression password: www.bzxz.net

ICS77.180
Standard of the Machinery Industry of the People's Republic of China
JB/T3713.1-1999
Double Disc Shot Blaster
Published on 1999-05-14
Basic Parameters
Implemented on 2000-01-01
National Bureau of Machinery Industry
JB/T3713.1-1999
This standard is a revision of JB3713.1-84 "Basic Parameters of Double Disc Shot Blaster". During the revision, only editorial changes were made according to relevant regulations, and the technical content has not changed.
This standard replaces JB3713.1-84 from the date of implementation. This standard is proposed and managed by the National Technical Committee for Foundry Machinery Standardization. The responsible drafting unit of this standard: Qingdao Foundry Machinery Factory. The main drafter of this standard: Zhang Shurong.
This standard was first issued in June 1984.
Mechanical Industry Standard of the People's Republic of China
Double Disc Shot Blaster
Basic Parameters
This standard specifies the basic parameters of double disc shot blaster. This standard applies to double disc shot blaster (hereinafter referred to as shot blaster). Parameters
The main parameter of shot blaster is impeller diameter D.
The basic parameters of shot blaster shall comply with the provisions of Table 1, 2.2
Impeller diameter D
Impeller speed n
Impeller inner width b
Number of blades
Shot blasting amount 9
ke/min
Motor power N
2.3The series size of the inner width b of the impeller of shot blaster is 62, 80, 100, 120mm. Approved by the State Bureau of Machinery Industry on May 14, 1999, 300
JB/T3713.1-1999
Replaced JB3713.1-84 www.bzxz.net
2000-01-01 implementation
Mechanical Industry Standard
Basic Parameters of Double Disc Shot Blaster
JB/T3713.11999
Mechanical Standardization Research Institute of the Ministry of Machinery Industry Published and distributed Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2, Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing sheet 1/2 Number of words 4000
Format 880×1230
First edition in July 1999
First printing in July 1999
Print run 1-500
Price 500 yuan
99-275
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.