GB/T 15675-1995 Continuously electrogalvanized cold-rolled steel sheets and strips
time:
2024-08-08 16:36:10
- GB/T 15675-1995
- Abolished
Standard ID:
GB/T 15675-1995
Standard Name:
Continuously electrogalvanized cold-rolled steel sheets and strips
Chinese Name:
连续电镀锌冷轧钢板及钢带
Standard category:
National Standard (GB)
-
Date of Release:
1995-08-10 -
Date of Implementation:
1996-04-01 -
Date of Expiration:
2009-04-01
Standard ICS number:
Metallurgy>>Steel products>>77.140.50 Flat steel and semi-finished productsChina Standard Classification Number:
Metallurgy>>Steel Products>>H46 Steel Plate, Steel Strip
alternative situation:
Replaced by GB/T 15675-2008
Release date:
1995-08-10Review date:
2004-10-14Drafting Organization:
Shanghai Baoshan Iron and Steel WorksFocal point Organization:
National Technical Committee on Steel StandardizationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Iron and Steel Association
Skip to download
Summary:
This standard specifies the classification, dimensions, technical requirements, test methods and inspection rules of continuous electrogalvanized cold-rolled steel sheets and strips. This standard applies to continuous electrogalvanized cold-rolled steel strips used in the automotive, electronics, home appliance and other industries, as well as the steel sheets and strips obtained by cross-cutting or longitudinal cutting thereof. Products produced according to this standard are not suitable for direct outdoor use without further surface coating except for fingerprint resistance treatment. GB/T 15675-1995 Continuous electrogalvanized cold-rolled steel sheets and strips GB/T15675-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- QB/T 1621-1992 Pin-tumbler furniture locks
- GB/T 39317-2020 General resource of military and civilian─Requirement for data element mapping
- JB/T 8473-1996 Instrument valve group
- JB/T 8467-1996 Ultrasonic flaw detection method for forged steel parts
- GB 13077-2004 Periodic inspection and evaluation of aluminum alloy seamless gas cylinders
- JJF 1071-2000 The Rules for Drafting National Specification of Calibration
- JJG 880-2006 Verification Regulation of Turbidimeters
- CB/T 3625-1994 Quality requirements for centering and boring of rudder and shafting
- GB/T 7156-2003 Codes and identification of secret level for documents
- JB/T 4312-1999 Flameproof bolt
- HG/T 2165-1991 D301 Macroporous weakly basic styrene anion exchange resin
- JB/T 3364.2-1999 Accuracy test of horizontal circular sawing machines
- SY 5592-1993 Polymer gel type PIA-605 profile control agent
- GB/T 5386-1994 Motorcycle and moped coasting test method
- HG/T 2724.4-1995 Rubber thread test method Determination of stress retention rate
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com